• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.408-414
• /
• 2020

The method of overcoming the limitation of optical phase conjugator applied into optical long-haul link for transmitting high capacity wavelength division multiplexed (WDM) channels was investigated. The configuration of optical link was based on dispersion-managed link, in which dispersion compensating fiber inserted into each fiber span with single mode fiber, and optical phase conjugator was added into suitable location of link. The maximum number of fiber spans as a function of the launch power of WDM channels in optical link with optical phase conjugator placed at the proposed location was induced and compared for analyzing the compensation performance of the distorted WDM channels. It was confirmed that the more optical phase conjugator depart from the midway of total transmission length, the less the distorted WDM channels was compensated, however, it was also confirmed that the degradation of compensation can be overcome by the suitable value of residual dispersion per span and by the reasonable choice of fiber span controlling total dispersion accumulated in overall transmission link.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.4
• /
• pp.261-269
• /
• 2013

This paper describes the design and development of VSI (VLBI standard interface) optical adapter for transmitting VLBI(Very long baseline interferometry) observation data with optical signal. VSI cable comprised of 80-line is being used for observed data transmission with maximum length of 5-meter between playbacks (Mark5B, VERA2000) and raw VLBI data buffer (RVDB), RVDB and VLBI correlation subsystem (VCS) in Daejeon correlator. It has a plan to conduct the data processing for 16-stations and introduce the 14 RVDB systems in near future. And data loss frequently occurred because of trouble of VSI cable MDR80 connector. By considering the data loss by connector error of VSI cable, RVDB system extension plan, effective space usage and long distance data transmission(e-VLBI), the VSI optical adapter was proposed and developed for effectively transmitting and receiving VLBI data through optical signal. In order to confirming the performance of developed VSI optical adapter, the experiments for data transmission was conducted between playback and RVDB system, and confirmed that data transmission was clearly done without any data loss.

• Current Optics and Photonics
• /
• v.5 no.2
• /
• pp.147-154
• /
• 2021

Microfluidic chip technology is a research focus in biology, chemistry, and medicine, for example. However, microfluidic chips are rarely applied in imaging, especially in ghost imaging. Thus in this work we propose a ghost-imaging system, in which we deploy a novel microfluidic chip modulator (MCM) constructed of double-layer zigzag micro pipelines. While in traditional situations a spatial light modulator (SLM) and supporting computers are required, we can get rid of active modulation devices and computers with this proposed scheme. The corresponding simulation analysis verifies good feasibility of the scheme, which can ensure the quality of data transmission and achieve convenient, fast ghost imaging passively.

• ETRI Journal
• /
• v.30 no.2
• /
• pp.301-307
• /
• 2008

As broadband access is evolving from digital subscriber lines to optical access networks, Ethernet passive optical networks (EPONs) are considered a promising solution for next generation broadband access. The point-to-multipoint topology of EPONs requires a time-division multiple access MAC protocol for upstream transmission. In this paper, we propose a new enhanced dynamic bandwidth allocation algorithm with fairness called EFDBA for multiple services over EPONs. The proposed algorithm is composed of a fairness counter controller and a fairness system buffer in the optical line terminal. The EFDBA algorithm with fairness can provide increased capability and efficient resource allocation in an EPON system. In the proposed EFDBA algorithm, the optical line termination allocates bandwidth to the optical network units in proportion to the fairness weighting counter number associated with their class and queue length. The proposed algorithm provides efficient resource utilization by reducing the unused remaining bandwidth made by idle state optical network units.

• JOURNAL OF ELECTRICAL WORLD
• /
• no.9 s.153
• /
• pp.11-18
• /
• 1989

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.270-272
• /
• 1993

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.423-430
• /
• 1994

We designed and fabricated the single mode fiber pigtailed DFB-LD module for 2.5 Gbps optical communication system. In the design of the DFB-LD module, we made the module divided into two parts of inner sub-module and outer 14-pin butterfly package and cylindrical shaped sub-module contain quasi confocal 2 lens system including optical isolator and electrical connection between these parts via hybrid substrate of bias T circuit. Laser welding was used to assemble the sub-module which requires accurate fixing between optical elements. The fabricated DFB-LD module showed optical coupling efficiency of 20% and - 3 dB small signal response of more than 2.6 GHz. We confirmed mechanical reliability of the module by temperature cycle test where the tested module exhibit optical power fluctuation of less than 10%. Finally we evaluated the performance of the fabricated DFB-LD module as light source of 2.5 Gbps optical communication system, sensitivity of - 30.2 dBm was obtained through 47 km optical fiber transmission under the criterion of $1\times10^{-10}$ BER and transmission penalties were 1.5 dB caused by extinction ratio and 1.0 dB caused by chromatic dispersion of normal single mode fiber. fiber.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.8
• /
• pp.1235-1240
• /
• 2013

We investigate an approximate analytic expression of signal distortion caused by the interaction between self-phase modulation (SPM) and dispersion in the dispersion-managed optical transmission where the dispersion is optimally compensated. From the analytic study, we obtain the analytic expression of the signal distortion in dispersion-managed optical transmission system. To confirm the validity of the analytic expression, we show that the eye-opening penalties calculated by the analytic expression correspond with the simulation results. Using the analytic result, we can easily estimate the signal distortion without complex nonlinear simulations.

• Journal of Advanced Navigation Technology
• /
• v.25 no.4
• /
• pp.286-292
• /
• 2021

Dispersion maps of antipodal symmetric type for improvement of compensation effect in dispersion managed link combined with optical phase conjugation, which can compensate for the distorted wavelength division multiplexed (WDM) signals due to chromatic dispersion and nonlinear Kerr effects of single-mode fiber, were proposed. It was confirmed that the proposed all of antipodal symmetric dispersion maps was more effective to compensate for the distorted WDM channels than the conventional link of uniform type dispersion map. Especially, dispersion maps formed like the inversion of alphabet S were more advantageous as the distorted WDM channels were compensated than dispersion maps formed like alphabet S. It was expected that the variety of optical network topology was more expanded by applying the proposed antipodal symmetric dispersion maps into transmission link.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1933-1940
• /
• 1997

The development of CMOS IC chip and external system with optical transmission sytem is proposed in this paper, which deal with 4 subject 4 channel biological signals, receive and transmit biological signals to the external system using LED and infrared light of photodiode. This system decreases the dependency of power supply voltage to the COMS IC chip. A newenforce synchronization technique using infrared bi-directional communication has ben proposed. The telemetner IC with the size of $5.1{\times}5.1mm^2$ has the followingfunctions:receiving of command signal, initialization of internal state of all functional blocks, decoding of subject selection signal, time division multiplexing of 4-channel modulated biological signals, transmission of modulated signals to external system, and auto power down control. To confirm the total telemetry system, electrocardogram is transmitted and received to the external system using optical link.