• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.05a
• /
• pp.74-77
• /
• 1988

This paper reports the properties of antireflection structure and hole formation of Te-based systems. The optical-recording characteristics of metallic recording media are enhanced significantly by incorporating the metal(Al) layer into an antreflection trilayer structure. Due to the interface condition inherent in the design of the trilayer structure, reflectivity from holes is ranked low fraction (<10%). The hole formation is carried by $Ar^+$ Laser(488nm). For 20nsec pulse duration, hole opening power(threschold) of $(Te_{86}Se_{14})_{50}Bi_{50}$ trilayer is lower than that of monolayer that used in this experiment. Hole shapes of the whole sample were clean.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.503-505
• /
• 2009

In this paper, we research the method for write quality improvement by temperature characteristic of Laser diode for optical recording. Differential Resistance of Blu-ray laser diode is changed by temperature. We analyze the effect of the change of the differential resistance and propose the method for the write quality improvement.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.888-893
• /
• 2004

This paper proposed a dual actuator using bimorph PZT for information storage device based on prove array NSOM(Near-field Scanning Optical Microscopy). The gap between the media and the optical head should be maintained within the optical tolerance. Therefore, a new actuator having high sensitivity is required. Bimorph PZT, which has fast access time and high sensitivity characteristic, is suitable for this precise actuating system. This paper is focused on derivation of mathematical model of dual bimorph PZT actuator and control algorithm. Hamilton's principle was used for mathematical model. The model is verified by FEA(Finite Element Analysis), and compared with experimental results. Different control algorithms were used f3r two bimorph PZT actuating same direction and opposite direction. The gap between recording media and optical head was controlled within 20nm in experiment.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.4-11
• /
• 2005

In this paper, we propose novel optics design for media inside near-field recording (NFR) using hemispherical solid immersion lens (HMS). To obtain strong advantage of data protection and high data capacity simultaneously, HMS based near field optics using aplanatic position of super hemisphere is designed. In this design, to improve small optical tolerance of this aplanatic position, additional aspheric lens surface is added on top of the HMS and it is combined with zoom optics which composed of two single lenses having low numerical aperture (NA). Also, to compensate chromatic aberration which happens seriously in optics using blue laser diode, diffractive optical element is used. Using zoom optics, additional aspheric lens surface, and diffractive optical element together, wavefront aberration and chromatic aberration are effectively reduced in broad range of cover layer thickness and wavelength variation. In addition, In this paper, effect of gap induced aberration is investigated by analyzing different behavior of each TM and TE wave for designed media inside dual-layer NFR optics.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.1
• /
• pp.13-20
• /
• 2006

In this paper, we propose novel optics design for media inside near-field recording(NFR) using hemispherical solid immersion lens(HMS). To obtain strong advantage of data protection and high data capacity simultaneously, HMS based near field optics using aplanatic position of super hemisphere is designed. In this design, to improve small optical tolerance of this aplanatic position, additional aspheric lens surface is added on top of the HMS and it is combined with zoom optics which composed of two single lenses having low numerical aperture(NA). Also, to compensate chromatic aberration which happens seriously in optics using blue laser diode, diffractive optical element is used. Using zoom optics, additional aspheric lens surface, and diffractive optical element together, wavefront aberration and chromatic aberration are effectively reduced in broad range of cover layer thickness and wavelength variation. In addition, in this paper, effect of gap induced aberration is investigated by analyzing different behavior of each TM and TE wave for designed media inside dual-layer NFR optics.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1994.03a
• /
• pp.12-13
• /
• 1994

Magnetic recording is still considered to be a.leader in storage industries in general. The rigid disk drive, in particular, has an advantage over tape, optical, magneto-optical, or flash memories, because of high areal density and fast access time with reasonably low cost per Mbyte. However, to be competitive in the market and to keep an edge over other storage devices, head and media in rigid disk drives require better performance per cost and more aggressive improvement in areal density, as shown in Fig. 1, than before. In this review paper, the future trend in head/media technologies of the rigid disk drive has been reviewed. Thin film media and thin film inductive/MR heads will be mainly discussed, since they are expected to be dominant in the future high-end drives over other technologies, such as particulate media or MIG heads.(omitted)mitted)

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.171-176
• /
• 2005

In the information storage development, the trend of the storage device is to increase the recording density. Among such an effort, near-field probe recording is spotlighted as a method of high increasing recording density. For the successfully embodiment of storage device, the actuating mechanism of near-field probe is essentially designed. In this paper, we suggest the slider similar with conventional HDDs and design the slider using near- field probe for the purpose of applying the slider in order to control gap between probe and media. The most important object of slider design is to guarantee the flying ability and stability. For achievement of these design objects, we perform two step of optimal design process. The media is mod! eled as random displacement, which is only considered roughness of disk surface. The design slider is analyzed with dynamic state in assumed media. At this process, the optimal model is confirmed to stable flying stability.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.1
• /
• pp.65-70
• /
• 2006

In the information storage development, the trend of the storage device is to increase the recording density. Among such an effort, near-field probe recording is spotlighted as a method of high increasing recording density. For the successfully embodiment of storage device, the actuating mechanism of near-field probe is essentially designed. In this paper, we suggest the slider similar with conventional HDD and design the slider using near-field probe for the purpose of applying the slider in order to control gap between probe and media. The most important object of slider design is to guarantee the flying ability and stability. For achievement of these design objects, we perform two step of optimal design process. The media is supposed to model as random displacement, which is only considered roughness of disk surface. The design slider is analyzed with dynamic state in assumed media. At this process, the optimal model is confirmed to stable flying stability.

• Transactions of the Society of Information Storage Systems
• /
• v.11 no.2
• /
• pp.31-35
• /
• 2015

The Blu-ray Disc Recordable-Triple Layer (BD-R TL) media is considered as one of strong candidates for archival application among optical media formats, due to its large capacity. However, the long-term stability and degradation aspect have not been fully understood yet for BD-R TL media. Thus, the BD-R TL media were recorded at full tracks and analyzed by the random-symbol error rate (R-SER) measurement at different recording layers and recording positions after the accelerated aging test to understand its long-term stability. Finally, the general degradation aspect of BD-R TL media was discussed to improve the long-term stability.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.06a
• /
• pp.222-223
• /
• 2003