• Journal of the Optical Society of Korea
• /
• v.7 no.3
• /
• pp.197-201
• /
• 2003

We investigated recording dynamics of a holographic grating in the photorefractive LiNbO$_3$ crystal under the low-intensity condition of recording beams. New expressions for the space-charge field and the recording time constant were obtained by solving the Kukhtarev equations under the global space -charge field, which is induced in the previous process of recording and erasing. Their validity can be confirmed by considering the limit that the period of the grating goes to infinity both theoretically and experimentally. It was found that the new expression for the recording time constant allows us to determine acceptor concentration to be $1.2${\times}$10^{21}m^{-3}$ for pure LiNbO$_3$ crystal and 2.5${\times}$$10^{21}m^{-3}$ for the 0.1 mol% iron doped LiNbO$_3$ crystal from the measured ratio of the recording time constant under the extremely large grating condition, in which the diffusion effect can be neglected, to that under the small grating condition.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.07a
• /
• pp.68-72
• /
• 1990

• Proceedings of the Optical Society of Korea Conference
• /
• 1999.08a
• /
• pp.38-39
• /
• 1999

• Optical Science and Technology
• /
• v.6 no.1
• /
• pp.13-18
• /
• 2002

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.112-114
• /
• 1990

A method for fabrication of holographic optical elements (HOE) using dichromated gelatin (DGG) as a recording material is presented. we describe the holographic properties of the DGG and the processing techniques. Holographic characteristics of the DGG including exposure characteristics, diffraction efficiency and angular sensitivity are also discussed. The diffraction efficiency of the obtained holographic grating is about 84%.

• Journal of Magnetics
• /
• v.1 no.2
• /
• pp.86-89
• /
• 1996

The dc magnetron sputter deposited (Pt/Co/Pt/Ni) multilayers which exhibited Curie temperatures in the range of 150-$300^{\circ}C$ were studied as possible alternative multilayers for magneto-optical recording to the widely studied Co/Pt, whose Curie temperatures are in the range of 200~$400^{\circ}C$. The Coercivities of these multilayers were between 450 Oe and 800 Oe. These multilayers exhibited comparable magnetic and magneto-optical properties to Co/Pt multilayers with enhancement of the Kerr rotation at lower wavelengths and negligible Kerr ellipticity over a wide range of the spectrum (4000~7000$\AA$ ).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.788-793
• /
• 2002

Hybrid type slim tilt actuator and 6-wire supported are developed for DVD recording in the optical disc drive of notebook PC, which can compensate the inclination of disc and objective lens. The hybrid actuator uses the actuating method of moving coil in the focus and track direction and that of moving magnet in the tilt direction. Comparing with 6-wire supported actuator and hybrid type actuator, we can choose an actuator for slim super combo pickup. Two actuator are designed through the modal analysis and magnetic field analysis and experimental results shows dynamic characteristics. Finally, it is verified that the actuator can compensate the disc tilt of ${\pm}0.4^{\circ}$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.20-22
• /
• 1997

In ours study, we investigated the various properties in Te-light doped $Sb_{85}$G $e_{15}$ thin films such as the change of reflectance and transmittance according to phase change from amorphous to crystalline states In all films the transmittance was decreased, but the reflectance was increased by annealing. Particularly, the reflectance between as- deposited state and annealed state showed the largest change in the T $e_{0.5}$($Sb_{85}$G $e_{15}$ )$_{99.5}$ thin film at 780nm, which was about 40% in as-deposited state and about 70% in annealed state. Therefore, it might be considered that the T $e_{0.5}$($Sb_{85}$G $e_{15}$ )$_{99.5}$ thin film is recording medium showing to a good optical properties if it is used to optical recording of the phase change type. change type.ype.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.67-72
• /
• 2005

This study proposes a design methodology to determine the optimum configurations of the optical flying head (OFH) for near-field recording systems. Since the OFH requires stricter static and dynamic characteristics of slider air-bearings within an optical tilt tolerance over the entire recording band, an optimum design to keep the focusing and tracking ability stable is essential. The desired flying characteristics considered in this study are to minimize the variation in flying height between the SIL and the disk from a target value, satisfying the restriction of the minimum flying height, to keep the pitch and roll angles within an optical tilt tolerance, and to ensure a higher air-bearing stiffness. Simulation results demonstrate the effectiveness of the proposed design methodology by showing that the static and dynamic flying characteristics of the optimally designed OFH are enhanced in comparison with those of the initial. The gap between the SIL and the disk can be kept at less than 100 nm even if the optical tilt tolerance of the SIL is considered.

• Transactions of the Society of Information Storage Systems
• /
• v.6 no.1
• /
• pp.12-17
• /
• 2010

Thermally-assisted magnetic recording (TAMR) is a potentially promising approach to increase the storage density of hard disk drive (HDD). However, TAMR has some issues such as temperature effects, media problems, thermal deformation and light delivery. In this research, we focused on light delivery. One of the powerful methods to deliver the light from laser diode to recording medium is the use of an optical fiber and a specially designed prism. However, the TAMR with optical fiber may have some flyability problems induced by the mounted optical fiber and prism. Also, the TAMR suspension using an optical fiber has high vertical and pitch stiffness. Therefore, p-torque is greatly increased by the optical fiber. Also, flying height (FH) of the slider with TAMR suspension can be largely changed by p-torque. Therefore, in this paper, we focus on the pitch static attitude (PSA) tolerance and the FH by PSA of the TAMR suspension. The FH is investigated using various errors and the PSA tolerance for TAMR suspension is proposed.