• 한국광학회지
• /
• 제12권6호
• /
• pp.512-518
• /
• 2001

본 논문에서는 Head Mounted Display(HMD)용 광학계의 기하학적인 특징과 회절광학소자를 이용한 HMD용 광학계 설계의 개념에 대해 논의하였다. 사용자가 영상을 볼 때 편안함을 갖도록 HMD용 광학계는 경량화, 소형화 및 고해상도를 만족해야 한다. 이러한 요구조건들을 만족시키기 위해 본 논문에서는 회절광학소자와 양면 비구면화를 적용하여 색수차와 단색수차를 보정하였다. 또한 인간의 눈을 모델링하여 일반화한 모형안을 HMD용 광학계의 설계 및 성능평가에 적용하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.635-639
• /
• 1997

In order to design a system a process or plant must be put into a mathematical form for analysis and evaluation, and an appropriate controller must be designed to attain the desired system response. In this paper, the mathematical model for an optical pickup actuator is proposed and an H .inf. controller is employed to obtain the optimal focusing/tracking servo system behavior. Simulation and experiments are carried out to verify the performance of the proposed model.

• 제어로봇시스템학회논문지
• /
• 제6권3호
• /
• pp.284-290
• /
• 2000

The measurement of electric current using optical techniques provides a number of important practical advantages including effective isolation from high line potentials and freedom from the saturation effects observed in conventional current transformers. In this work the optical current sensor which uses thin YIG(Yittrium Ion Garnet) film as a Faraday element has been developed. We have characterized this optical current sensor and implemented it to the OOCR(Opto-electronic OverCurrent Realy) Performance of the OOCR shows the possibility of replacing the present overcurrent relays with OOCR.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권1호
• /
• pp.64-73
• /
• 2012

Pointing stability of high precision observation satellites must satisfy the stringent requirements to perform at a designed level. As even a small vibrational disturbance can result in severe degradation of the optical performance, the effects of inorbit vibrational environment on the performance of optical payload must be predicted and analyzed in the design phase in order to ensure that the requirements imposed on the payload are fully met. In this paper, an integrated framework for the evaluation of the performance of optical payloads is developed. The developed simulation tool comprises of the reaction wheel induced disturbance model, state space model of a structure in modal form and Cassegrain reflector model. The performance degradation of the optical system due to jitter is expressed by using modulation transfer function (MTF) and image simulation. Moreover, vibration isolator model is also added to show the effectiveness of using a vibration isolator for the elimination of the effects of jitter in the acquisition of an image.

• 한국전자통신학회논문지
• /
• 제7권2호
• /
• pp.409-415
• /
• 2012

최근에 산업용 통신망에서 광통신과 산업용 이더넷을 융합하여 고속으로 로봇, 자동화 시스템에 사용하자고 하는 노력이 증가되고 있다. 본 논문에서는 기존의 산업용 광 네트워크 시스템의 큰 문제점으로 작용하였던 광 네트워크 결함 발생 시의 전체 네트워크 차단 문제 및 광케이블의 배선 문제를 해결하기 위하여 WDM 방식을 적용한 싱글 광 코어 기반의 양방향 광 이더캣 통신 기술을 제안하였다. 또한 해당 기술의 성능 검증을 위하여 WDM 양방향 광 이더캣 통신 모듈을 구현 및 성능 검증에 대한 내용을 종합적으로 기술하였다.

• 한국기계가공학회지
• /
• 제9권5호
• /
• pp.57-63
• /
• 2010

Tolerance analysis is one of the most important processes to improve the image quality of products. High resolution camera module for mobile phones needs precision assembly technology since the module becomes smaller and thinner. This paper will focus on the unit tolerance and the assembly tolerance which can affect the performance of the module. Lens shading and relative illumination were used to evaluate the optical axis scatter for each component on camera and estimate the assembly yield rate based on the evaluation result. A program was developed to analyze the impact on optical axis by each module, then to optimize the dimensions and tolerance for reducing the scatter of optical axis assembly. Through the simulation, though a rate of relative illumination was declined in where optical axis is displaced $100{\mu}m$ from sensor center, MTF performance is not influenced by increasing in optical axis displacement. It was seen that assembly yield was improved in result of simulation after correcting optical axis tolerance.

• 한국태양에너지학회 논문집
• /
• 제38권5호
• /
• pp.75-84
• /
• 2018

The most crucial point of reducing building energy is application of high performance envelope. The amount of heat exchange through window is highest in comparison of other envelopes so that heat exchange through window influence directly with building energy consumption. The window energy performance can be define with thermal, leakage and optical performance. In previous study we can confirmed that not only thermal performance but also optical performance are considered, 11% to 15% of building energy consumption can be reduced. Smart window system has potential of energy saving so that many industry field use smart window system including architectural area and these aspect causes smart window market continuous growth year by year. In this study, building energy consumption has been analyzed which consist of smart window that dynamically control optical states. The consideration of standard commercial building model for research, the reference medium size commercial building model of DOE (Department Of Energy, USA) has been used. The building energy simulation result of 4 axis in 8 regions in Korea shows 8% to 22% reduction of building energy consumption by application of smart window system.

• 한국정밀공학회지
• /
• 제31권5호
• /
• pp.403-409
• /
• 2014

For ground-based telescope application, the performance assessment of tip-tilt actuator is important because the optical quality of telescope depends upon the windshake compensation ability of the fast steering secondary mirror. But it is difficult to measure the performance characteristics of the actuators due to the large size mirror and test facilities including the vacuum support and structural frame. In this paper, the full-scale tip-tilt test bed for the large size secondary mirror with diameter of 1m is built and the several tests are performed including the range, resolution and frequency response function. From the measurement results, it is shown that the tip-tilt actuator can successfully compensate the windshake with frequency of maximum 12 Hz and be a candidate for the Giant Magellan Telescope.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.797-799
• /
• 2006

The Electro-optical camera subsystem as a payload of a satellite system consists of OM (optical module) and CEU(camera electronics unit), and most performances of the camera subsystem depend a lot on the CEU in which TDI CCDs(Time Delayed Integration Charge Coupled Device) take the main role of imaging by converting the light intensity into measurable voltage signal. Therefore it is required to specify and design the CEU very carefully at the early stage of development with overall specifications, design considerations, calibration definition, test methods for key performance parameters. This paper describes the overview of CEU development. It lists key requirement characteristics of CEU hardware and design considerations. It also describes what kinds of calibration are required for the CEU and defines the test and evaluation conditions in verifying requirement specifications of the CEU, which are used during acceptance test, considering the fact that CEU performance results change a lot depending on test and evaluation conditions such as operational line rate, TDI level, and light intensity level, so on.

• 한국태양에너지학회 논문집
• /
• 제32권4호
• /
• pp.43-50
• /
• 2012

Metal-metal oxide (M-M oxide) cermet solar selective coatings with a double cermet layer film structure were deposited on the Al-deposited glass substrate by using a directed current (DC) magnetron sputtering technology. M oxide (CrO and ZrO) was used as the ceramic component in the cermets, and Cr and Zr used as the metallic components. In addition, black Cr (Cr-$Cr_2O_3$ cermet) solar selective coatings were deposited on the Ni-plated Cu substrate by using a electroplating method for comparison. The thermal stability tests were carried out for performance evaluation of solar coatings. Reflectance measurements were used to evaluate both solar absorptance(${\alpha}$) and thermal emittance (${\epsilon}$) of the solar coatings before and after thermal testing by using a spectrometer. Optical properties of optimized cermet solar coatings were ${\alpha}{\simeq}0.94-0.96$ and ${\epsilon}{\simeq}0.1$ ($100^{\circ}C$). The results of thermal stability test of M-M oxide solar coatings showed that the Cr-CrO cermet solar selective coatings were more stable than the Zr-ZrO cermet selective coatings at temperature of both $400^{\circ}C$ in air and $450^{\circ}C$ in vacuum. The black Cr solar selective coatings were degraded in air at temperature of $400^{\circ}C$. The main optical degradation modes of these coatings were diffusion of metal atoms, and oxidation.