• ETRI Journal
• /
• v.24 no.2
• /
• pp.117-130
• /
• 2002

Due to its salient features, the optical burst switch is becoming a key technology for the optical Internet. Within this technology, the survivability issue in the optical Internet has to be addressed because a simple failure causes severe damage to the huge amount of data carried in optical fiber. In this paper, we introduce a restoration procedure that can provide good survivability in the optical burst switch (OBS)-based optical Internet. OBS restoration can survive various types of network failure while maintaining good network performance. We propose novel restoration mechanisms, namely, "temporary Label Switched Path (LSP)" and "bossy LSP," to enhance restoration time and network utilization. The simulation results verify that the proposed OBS restoration achieves good network performance and provides good network connectivity as well.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.4
• /
• pp.1-9
• /
• 2016

The warpage on mobile phone camera packages occurs due to the CTE(Coefficient of Thermal Expansion) mismatch between a thin silicon die and a substrate. The warpage in the optical instruments such as camera module has an effect on the field curvature, which is one of the factors degrading the optical performance and the product yield. In this paper, we studied the effect of die bonding epoxy on the package and optical performance of mobile phone camera packages. We calculated the warpages of camera module packages by using a finite element analysis, and their shapes were in good agreement showing parabolic curvature. We also measured the warpages and through-focus MTF of camera module specimens with experiments. The warpage was improved on an epoxy with low elastic modulus at both finite element analysis and experiment results, and the MTF performance increased accordingly. The results show that die bonding epoxy affects the warpage generated on the image sensor during the packaging process, and this warpage eventually affects the optical performance associated with the field curvature.

• Current Optics and Photonics
• /
• v.8 no.2
• /
• pp.127-137
• /
• 2024

The distribution of tags is an important factor that affects the performance of radio-frequency identification (RFID). To study RFID performance, it is necessary to obtain RFID tags' coordinates. However, the positioning method of RFID technology has large errors, and is easily affected by the environment. Therefore, a new method using optical measurement is proposed to achieve RFID performance analysis. First, due to the possibility of blurring during image acquisition, the paper derives a new image prior to removing blurring. A nonlocal means-based method for image deconvolution is proposed. Experimental results show that the PSNR and SSIM indicators of our algorithm are better than those of a learning deep convolutional neural network and fast total variation. Second, an RFID dynamic testing system based on photoelectric sensing technology is designed. The reading distance of RFID and the three-dimensional coordinates of the tags are obtained. Finally, deep learning is used to model the RFID reading distance and tag distribution. The error is 3.02%, which is better than other algorithms such as a particle-swarm optimization back-propagation neural network, an extreme learning machine, and a deep neural network. The paper proposes the use of optical methods to measure and collect RFID data, and to analyze and predict RFID performance. This provides a new method for testing RFID performance.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.11a
• /
• pp.134-135
• /
• 2002

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.536-539
• /
• 2002

The use of concatenated codes in noncoherent synchronous optical fiber CDMA networks is proposed. The concatenated code sequences are generated using balanced Walsh code sequences and Walsh code sequences. The selection of balanced Walsh code sequences is presented and the design of fully programmable transmitter and receiver is reported. The analysis of the system BER performance shows that multiple-access interference is completely eliminated and the BER performance of the proposed system is better than that of the non-coherent synchronous optical fiber CDMA system using optical orthogonal codes with double hard-limiters.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.181-184
• /
• 2000

In this paper, performance of an optical CDMA system with PCCC and SCCC is simulated and compared. It is assumed that optical channel is an intensity modulated (IM) channel and direct-detection scheme is employed to detect the received optical signal. The modulation scheme used is pulse-position-modulation (PPM). The performance is evaluated in terms of bit error probability. From the simulation results, it is shown that turbo coding offers considerable coding gain with reasonable encoding/decoding complexity.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.99-102
• /
• 2002

In this work, we evaluated the performance of soft iterative decoder with soft block decoder in optical storage system. Because optical storage system requires run- length limited code in general, adaptation of the soft decoders such as turbo code or LDPC(low density parity check code) is difficult without soft block decoders. The performance of the overall optical detection system is evaluated and the simplified channel detection is also proposed.

• Proceedings of the Optical Society of Korea Conference
• /
• 1995.06a
• /
• pp.210-215
• /
• 1995

Technology development toward the use of LiNbO3-based acoustic tunable filters as WDM 2$\times$2 cross-connect switches is reviewed. Recenly, it was found that a fundamental behavior of multi-wavelength Bragg scattering critically affects the crosstalk performance of the acousto-optic tunable filter. We revuew serveral reported methods of overcoming the performance degradation. We will eventually ask whether the device is up to task of WDM optical switching.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.6
• /
• pp.397-406
• /
• 2011

Since tolerance allocation in a mobile phone camera manufacturing process greatly affects production cost and reliability of optical performance, a systematic design methodology for allocating optimal tolerances is required. In this study, we proposed the tolerance optimization procedure for determining tolerances that minimize production cost while satisfying the reliability constraints on important optical performance indices. We employed Latin hypercube sampling for evaluating the reliabilities of optical performance and a function-based sequential approximate optimization technique that can reduce computational burden and well handle numerical noise in the tolerance optimization process. Using the suggested tolerance optimization approach, the optimal production cost was decreased by 30.3 % compared to the initial cost while satisfying the two constraints on the reliabilities of optical performance.

• Journal of the Optical Society of Korea
• /
• v.13 no.3
• /
• pp.373-378
• /
• 2009

An Ethernet passive optical network (EPON) is a low-cost, high-speed solution to the bottleneck problem of a broadband access network. This paper analyzes the delay and the jitter performance of dynamic bandwidth allocation (DBA) schemes for differentiated services in EPONs. Especially, the average packet delay and the delay jitter of the expedited forwarding (EF) traffic class are compared, with consideration as to whether a cyclic or an interleaved polling scheme is superior. This performance evaluation reveals that the cyclic polling based DBA scheme provides constant and predictable average packet delay and improved jitter performance for the EF traffic class without the influence of load variations.