대기 온도, 대기 일사량, 풍속, 대기 수증기압 등의 기상자료, 멀칭재료와 토양의 광학적 특성 및 열적 특성을 입력자료로 하여 토양 표면의 에너지 수지식과 토양 열흐름 방정식을 수치해석하여 멀칭한 토양의 온도를 추정하는 모델을 작성하였으며 또한 실측자료를 이용하여 모델을 검정하였다. 모델에 의한 지온의 추정에 있어서 토양온도의 초기 치는 시작일의 50cm깊이의 실측지온으로 하였으며, 계산은 0시에 시작하여 10분 간격으로 하였다. 모델은 지온의 시간 및 토층에 따른 변화를 잘 묘사하였다. 모델에 의해 추정된 값과 실측치와의 상관관계는 무멀칭의 5 cm 및 l0 cm에서 상관계수(n=720)가 각각 0.961, 0.966이었고, 같은 층위의 종이멀칭에서는 각각 0.969, 0.945이었고, 흑색 폴리에틸렌 필름 멀칭에서의 상관계수는 각각 0.915, 0.938이었다. 모델에 의해 추정된 값들이 실측치$\pm$2.0$^{\circ}$C 범위안에 들어가는 수가 전체 추정치중에서 차지하는 비율은 무멀칭처리의 5 cm 및 10 cm에서 각각 97.4%, 98.5%이었고, 종이 멀칭에서는 각각 95.8%, 97.4%이었으며, 흑색 폴리에틸렌 필름 멀칭에서 70.1%, 92.6%이었다. 이상의 결과에 의하면 멀칭에 따른 지온을 대체로 잘 묘사하는 것으로 판단된다. 다만 야간 지온추정에서 오차가 다소 컸는데 이는 야간의 대기 장파복사의 평가가 어렵기 때문이며 이에 대한 보완이 필요하다.
전차 조준경으로 사용될 수 있는 2세대 열상장비를 개발하였다. 설계된 장비는 프랑스 Sofradir사의 $480\times6$ 배열 원적외선$(7.7{\mu}m-10.3{\mu}m)$ MCT(HgCdTe) 검출기를 이용하였고, $2.67^{\circ}\times2^{\circ}$의 고배율 협시계와 $10^{\circ}\times7.5^{\circ}$의 저배율 광시계의 이중배율을 가지고 있다. 또한 넓은 운용 온도 범위에서도 시스템의 성능이 저하되지 않도록 비열화 기술을 적용하였다. 설계된 장비는 고효율의 주사장치로 47만 화소의 실시간 영상 재현이 가능하며, 이는 1세대 열상장비에 비하여 화소수가 대폭 증가한 것이다. 적외선 검출소자들의 불균일 보정을 위해서 열전 냉각 소자를 이용한 두 점 보상 기법을 제시하여 실시간 보정이 이루어지게 하였고, 열영상 분포 히스토그램 가변 방식의 처리 기법을 제안하여 적용함으로써 대조비가 매우 낮은 표적의 식별도 용이하게 하였다. 설계 및 제작된 2세대 열상장비의 고배율에서 최소분해가능온도차를 측정한 결과, 2cycles/mrad의 공간주파수에서 0.05K 이하의 우수한 결과를 보였다.
Mitochondria play key roles in the production of cell's energy. Their dominant function is the synthesis of adenosine 5'-triphosphate (ATP) from adenosine diphosphate (ADP) and phosphate (Pi) through the oxidative phosphorylation. Evaluation of drug-induced mitochondrial toxicity has become increasingly important since mitochondrial dysfunction has recently been implicated in numerous diseases including cancer and diabetes mellitus. Mitochondrial functions have been monitored via oxygen consumption, mitochondrial membrane potential, and more importantly via ATP synthesis since ATP synthesis is the most essential function of mitochondria. Various analytical methods have been employed to investigate ATP synthesis in mitochondria, including high performance liquid chromatography (HPLC), bioluminescence technique, and pH measurement. However, most of these methods are based on destructive analysis or indirect monitoring through the enzymatic reaction. Infrared absorption spectroscopy (IRAS) is one of the useful techniques for real-time, label-free, and direct monitoring of biological reactions [1,2]. However, the strong water absorption requires very short path length in the order of several micrometers. Transmission measurements with thin path length are not suitable for mitochondrial assays because solution handlings necessary for evaluating mitochondrial toxicity, such as rapid mixing of drugs and oxygen supply, are difficult in such a narrow space. On the other hand, IRAS in the multiple internal reflection (MIR) geometry provides an ideal optical configuration to combine solution handling and aqueous-phase measurement. We have recently reportedon a real-time monitoring of drug-induced necrotic and apoptotic cell death using MIR-IRAS [3,4]. Clear discrimination between viable and damaged cells has been demonstrated, showing a promise as a label-free and real-time detection for cell-based assays. In the present study, we have applied our MIR-IRAS system to mitochondria-based assays by monitoring ATP synthesis in isolated mitochondria from rat livers. Mitochondrial ATP synthesis and hydrolysis were in situ monitored with MIR-IRAS, while dissolved oxygen level and solution pH were simultaneously monitored with O2 and pH electrodes, respectively. It is demonstrated that ATP synthesis and hydrolysis can be monitored by the IR spectral changes in phosphate groups in adenine nucleotides and MIR-IRAS is useful for evaluating time-dependent drug effects of mitochondrial toxicants.
Nanoscale noble-metals have attracted enormous attention from researchers in various fields of study because of their unusual optical properties as well as novel chemical properties. They have possible uses in diverse applications such as devices, transistors, optoelectronics, information storages, and energy converters. It is well-known that nanoparticles of noble-metals such as silver and gold show strong absorption bands in the visible region due to their surface-plasmon oscillation modes of conductive electrons. Silver nanocubes stand out from various types of Silver nanostructures (e.g., spheres, rods, bars, belts, and wires) due to their superior performance in a range of applications involvinglocalized surface plasmon resonance, surface-enhanced Raman scattering, and biosensing. In addition, extensive efforts have been devoted to the investigation of Gold-based nanocomposites to achieve high catalytic performances and utilization efficiencies. Furthermore, as the catalytic reactivity of Silver nanostructures depends highly on their morphology, hollow Gold nanoparticles having void interiors may offer additional catalytic advantages due to their increased surface areas. Especially, hollow nanospheres possess structurally tunable features such as shell thickness, interior cavity size, and chemical composition, leading to relatively high surface areas, low densities, and reduced costs compared with their solid counterparts. Thus, hollow-structured noblemetal nanoparticles can be applied to nanometer-sized chemical reactors, efficient catalysts, energy-storage media, and small containers to encapsulate multi-functional active materials. Silver nanocubes dispersed in water have been transformed into Ag@Au nanoboxes, which show highly enhanced catalytic properties, by adding $HAuCl_4$. By using this concept, $SiO_2$-coated Ag@Au nanoboxes have been synthesized via galvanic replacement of $SiO_2$-coated Ag nanocubes. They have lower catalytic ability but more stability than Ag@Au nanoboxes do. Thus, they could be recycled. $SiO_2$-coated Ag@Au nanoboxes have been found to catalyze the degradation of 4-nitrophenol efficiently in the presence of $NaBH_4$. By changing the amount of the added noble metal salt to control the molar ratio Au to Ag, we could tune the catalytic properties of the nanostructures in the reduction of the dyes. The catalytic ability of $SiO_2$-coated Ag@Au nanoboxes has been found to be much more efficient than $SiO_2$-coated Ag nanocubes. Catalytic performances were affected noteworthily by the metals, sizes, and shapes of noble-metal nanostructures.
Kim, Ji Hye;Shin, Young Min;Kim, Seung Tae;Kwon, HyukSang;Ahn, Byung Tae
Current Photovoltaic Research
/
제1권1호
/
pp.38-43
/
2013
$Cu(In,Ga)_3Se_5$ is a candidate material for the top cell of $Cu(In,Ga)Se_2$ tandem cells. This phase is often found at the surface of the $Cu(In,Ga)Se_2$ film during $Cu(In,Ga)Se_2$ cell fabrication, and plays a positive role in $Cu(In,Ga)Se_2$ cell performance. However, the exact properties of the $Cu(In,Ga)_3Se_5$ film have not been extensively studied yet. In this work, $Cu(In,Ga)_3Se_5$ films were fabricated on Mo-coated soda-lime glass substrates by a three-stage co-evaporation process. The Cu content in the film was controlled by varying the deposition time of each stage. X-ray diffraction and Raman spectroscopy analyses showed that, even though the stoichiometric Cu/(In+Ga) ratio is 0.25, $Cu(In,Ga)_3Se_5$ is easily formed in a wide range of Cu content as long as the Cu/(In+Ga) ratio is held below 0.5. The optical band gap of $Cu_{0.3}(In_{0.65}Ga_{0.35})_3Se_5$ composition was found to be 1.35eV. As the Cu/(In+Ga) ratio was decreased further below 0.5, the grain size became smaller and the band gap increased. Unlike the $Cu(In,Ga)Se_2$ solar cell, an external supply of Na with $Na_2S$ deposition further increased the cell efficiency of the $Cu(In,Ga)_3Se_5$ solar cell, indicating that more Na is necessary, in addition to the Na supply from the soda lime glass, to suppress deep level defects in the $Cu(In,Ga)_3Se_5$ film. The cell efficiency of $CdS/Cu(In,Ga)_3Se_5$ was improved from 8.8 to 11.2% by incorporating Na with $Na_2S$ deposition on the CIGS film. The fill factor was significantly improved by the Na incorporation, due to a decrease of deep-level defects.
본 연구에서 $(2D)^2$ PCA 알고리즘을 이용한 최적 RBFNNs 기반 나이트비전 얼굴인식 시뮬레이터을 설계한다. CCD 카메라로 야간에 이미지를 취득할 경우 조도가 낮기 때문에 인식을 수행하기 어려운 수준의 이미지가 취득되는 문제점이 발생한다. 따라서 본 논문에서는 나이트 비전 카메라를 이용하여 야간 얼굴을 취득하였다. 또한 얼굴과 비얼굴 이미지 영역에서 야간 얼굴 이미지를 검출하기 위해 Ada-Boost 알고리즘을 사용한다. 그리고 히스토그램 평활화를 이용하여 이미지의 왜곡 현상을 최소화 한다. 이렇게 얻어진 고차원 이미지를 저차원으로 축소하기 위해 $(2D)^2$ PCA 알고리즘을 사용했다. 다항식 기반 RBFNNs을 이용한 지능형 패턴 분류 모델을 통하여 얼굴인식을 수행 한다. 마지막으로 차분진화 알고리즘을 사용하여 파라미터를 최적화 한다. $(2D)^2$ PCA를 최적 RBFNNs 기반 나이트비전 얼굴인식 시스템의 성능 평가를 위하여 IC&CI Lab data를 사용하고 실제 얼굴 인식 시스템을 설계한다.
본 연구에서는 뇌 종양 수술에서 다수의 광원과 빔 스플리터 모듈을 사용해 종양과 혈관의 형광영상을 동시에 검출하고 획득한 형광영상을 동일한 디스플레이 장치에 표시함으로써 시술자에게 종양과 혈관의 정확한 정보를 실시간으로 제공할 수 있는 현미경 시스템을 제안한다. 5-ALA(5-Aminolevulinic acid) 와 ICG(Indocyanine green) 의 형광영상의 동시 검출을 위해 빔 스플리터(beam-splitter : BS)모듈을 사용하였고 5-ALA는 600nm, ICG는 800nm이상의 파장 대역에서 가장 효율이 뛰어나도록 구성하였다. 빔 스플리터 모듈은 파장 대역에 따라 광학기기의 구조를 변경할 수 있고 필터를 탈, 착 가능한 구조로 설계하여 필요에 따라 빔 스플리터와 필터의 종류를 변경할 수 있으며 5-ALA 및 ICG 이외의 형광염료를 사용한 시술에서 사용할 수 있다. 빔 스플리터 모듈을 통한 형광영상은 5-ALA는 가시광역, ICG는 근적외선 영역을 검출 할 수 있는 CCD 카메라를 장착해 동일한 디스플레이에서 확인할 수 있고 획득한 형광영상은 닮음 변환(similarity transform)을 이용해 원영상과 정합하여 실시간으로 시술자에게 제공하는 시스템을 구현하였다.
본 연구에서는 설계제작된 KrF 엑시머 레이저 스텝퍼는 광원인 KrF엑시머 레이저, 조명광학계, 축소트영광학계, 정밀구동 웨이퍼 스테이지, 정렬시스템 및 이들을 제어하기 위한 제어계로 구성되어 있다. 본 실험에서 사용한 KrFdprtlaj 레이저는 밴드폭 3pm, 반복주파수 200Hz, 평균축력 3W이고, 5:1 투영렌즈는 N.A. 0.42, 전체 필드영역 $\varphi$21.2mm, 왜곡수차 최대 60nm 이하이다. 또한 정밀구동 웨이퍼 스테이지의 재현성과 해상도는 각각 $\pm$0.08$\mu\textrm{m}$/200mm(3 sigma), 100mm 반경에서 0.05 $\mu\textrm{m}$이다. 자동 초점 시스템은 $\pm$50$\mu\textrm{m}$범위에서 0.1$\mu\textrm{m}$의 해상도를 나타냈으며, 자동수평시스템은 120 arcsec 범위에서 larcsec의 해상도를 나타냈다. OFF-AXIS 정렬방식에서는 0.2$\mu\textrm{m}$의 해상도를 가지며, 두빔의 간섭을 이용한 새로운 TTL 정렬은 0.1$\mu\textrm{m}$의 해상도를 나타냈다. 스텝퍼 패턴 실험결과 SAL603레지스트를 사용하였을 때 웨이퍼의 노광후 열처리 $105^{\circ}C$, 60초에서 0.3$\mu\textrm{m}$ Lines and Spaces(L/S)까지 해상되었으며, 0.34$\mu\textrm{m}$ L/S에서 1$\mu\textrm{m}$의 초점심도를 얻을 수 있었다. 마스크 패턴과 레지스트 패턴의 선형성은 0.4$\mu\textrm{m}$ L/S가지 유지 되었다. 또한 XP-89131레지스트의 경우 노광후 열처리 $110^{\circ}C$, 60초에서 0.34$\mu\textrm{m}$ L/S까지 해상됨을 알수 있었다.
현재 GPS/IMU 기반의 차량항법기술은 GPS 신호 불량지역에서 위치 정밀도가 급격하게 저하된다. 근래에는 많은 차량에 주행 상태를 기록하기 위한 카메라를 탑재하고 있음에 따라 만약 도로시설물을 위치를 알 수 있을 경우 단사진 후방교차법(SPR)을 통해 카메라의 위치 및 자세를 산출할 수 있다. SPR로 추정된 외부표정요소는 GPS/IMU 항법해의 오차를 보정할 수 있음에 따라 GPS 신호 수신환경에 영향을 받지 않고 안정적으로 차량의 위치 및 자세를 결정할 수 있다. 따라서 본 연구에서는 GPS, IMU, 사진측량 기술인 SPR을 결합하여 GPS 수신환경에 구애받지 않고 안정적으로 위치 및 자세를 결정하는 GPS/IMU/SPR 통합 알고리즘을 개발하였다. GPS/IMU/SPR 통합 알고리즘은 확장형 칼만필터를 이용하여 약결합 방식으로 구현하였다. 또한 개발된 GPS/IMU/SPR 통합 알고리즘의 성능을 분석하기 위하여, GPS 수신환경 및 영상에 획득되는 기준점의 배치에 따른 시뮬레이션 테스트를 수행하였다. 시뮬레이션 테스트 결과, GPS/IMU/SPR 결합을 통해 산출되는 위치 및 자세가 GPS/IMU 결합 결과보다 안정적으로 산출되는 것을 확인하였다. 또한 영상의 기준점이 영상 중앙에 집중되어 배치되어 있을 경우에는 광축 방향으로 위치 오차가 증가되는 것으로 분석되었다. 향후 GPS/IMU/SPR 통합 알고리즘 성능을 면밀히 분석하기 위해서는 SPR 수행결과에 영향을 미치는 영상점 및 지상점의 측정오차, 초기 외부표정요소에 따른 성능 분석이 추가적으로 수행되어야 할 것이다.
본 논문에서는 디지털화된 형태로 취득 및 저장된 홀로그램 신호를 부호화하는 새로운 기술을 제안한다. 디지털 홀로그램의 독특한 특성을 파악하여 적절한 형태의 데이터로 변환한 후에 현재 널리 사용되고 있는 표준 압축 기술들에 적용하고자 한다. 전처리과정 이후에 부호화를 위해 추출된 홀로그램은 위치적인 다시점 특성을 이용하여 분할된다. 분할된 홀로그램은 2차원의 여러 시점에서 객체를 촬영한 것과 유사한 특성을 보인다. 시각적으로 잡음과 유사한 형태로 관찰되는 홀로그램의 회절 패턴은 그 자체로써 압축에 이용하기 어렵다. 따라서 홀로그램 생성 원리와 유사하면서 고속 변환이 가능한 2차원 DCT (Discrete Cosine Transform)를 이용하여 분할된 홀로그램을 주파수 변환한다. 주파수 변환된 분할 영역들은 시간적 및 공간적 상관도에 따라서 3차원 스캔 과정을 거치면서 하나의 비디오 스트림으로 구성된다. 비디오 스트림의 한 프레임에 해당하는 분할된 영역들은 다양한 범위를 가지는 계수들로 구성되는데 이를 재구성한 후에 부호화 알고리즘을 이용하여 압축한다. 실험 결과를 살펴보면 제안한 알고리즘은 기존의 기술에 비해서 16배 이상의 높은 압축율에서 더 좋은 복원 성능을 보였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.