• 전자공학회논문지B
• /
• 제33B권12호
• /
• pp.31-44
• /
• 1996

Since optical delay line signal processing which utilizes optical fiber as delay line elements can provide high speed and broadband signal processing, the optical delay line signal processing has numerous applications. Recently, many research papers which optical delay line signal processing techniques are being applied to OCDMA are published. The author has published paper on the design method for optical fiber filters of lattice structure. However, the previous design method does not realize the transfer function all the time. It can be realized with constraints. In this paper, we propose the design method that can realize the transfer function all the time without any constraints for the optical fiber filter of lattice structure.

• 대한전자공학회논문지SD
• /
• 제49권7호
• /
• pp.10-16
• /
• 2012

본 논문에서는 협대역 간섭 광학 필터(narrow band interference optical filter)를 적용하여 광학적 잡음에 내성이 강한 차세대용 마일즈 감지 시스템을 구현하고자 시도하였다. 900nm의 레이저 파장에 대해 파장범위(wavelength range) 895~915nm의 협대역 간섭 광학 필터를 적용한 결과 시가전 상황에서 발생할 수 있는 강한 광학적 잡음에 내성을 갖는 감지 특성을 얻을 수 있었다. 그러나 청색천이(blue shift) 현상에 의해 마일즈 감지 시스템에 입사각 $30^{\circ}{\sim}90^{\circ}$ 구간에 감지 사각 영역이 발생하였다. 이 문제를 해결하기위해 굴절체를 이용한 입사각 산란 방법을 제안하였고, 디옵터 5.4의 오목 메니스커스 렌즈 굴절체(concave meniscus lens refractor)를 마일즈 감지 시스템에 적용하여 입사각을 산란시킨 결과 감지 사각을 없앨 수 있었다.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.357-362
• /
• 2010

The joint transform correlator (JTC) has been the best known technique for pattern recognition and identification. This paper proposes a new technique of fringe adjustment by adopting a sinusoidal amplitude-modulated iterative filter convolved with an interference fringe pattern in the joint power spectrum (JPS) domain. The comparison of our new technique and other techniques is presented to show that the newly proposed technique can successfully improve both the correlation peaks and the peak signal-to-noise ratio (PSNR). Simulated results of enhanced interference fringes are also presented.

• 제어로봇시스템학회논문지
• /
• 제12권5호
• /
• pp.509-515
• /
• 2006

This paper presents a navigation error compensation scheme for Strap-Down Inertial Navigation System(SDINS) using electro-optical sensor. The proposed scheme uses the position or the attitude information from the sensor. For each case, Kalman filter model is derived and implemented. To show the effectiveness of the present compensation scheme, computer simulations have been carried out resulting in the boundedness of position and attitude errors.

• 한국멀티미디어학회논문지
• /
• 제24권12호
• /
• pp.1589-1597
• /
• 2021

Due to the low output rate and time delay of vehicle's navigation results, the electro-optical tracking system(EOTS) cannot estimate accurate target positions. If an inertial measurement unit(IMU) is additionally mounted into the EOTS and inertial navigation system(INS) is constructed, the high navigation output rate can be obtained. And the time-delay can be compensated by using the augmented Kalman filter. An accurate initial attitude is required in order to have accurate navigation outputs. In this paper, an attitude determination algorithm is proposed using the augmented Kalman filter in order to compensate measurement delay of the EOTS and have accurate initial attitude. The proposed initial attitude determination algorithm consists of an augmented Kalman filter, an INS, and an integrated Kalman filter. The augmented Kalman filter compensates the time-delay of the vehicle's navigation results and the integrated Kalman filter estimates the navigation error of the INS. In order to evaluate performance of the proposed algorithm, vehicle's navigation outputs and IMU measurements were generated using sensors' model-based measurement generator and initial attitude estimation errors of the proposed algorithm and the conventional algorithm without the augmented Kalman filter were compared for the generated measurements. The evaluation results show that the proposed algorithm has better accuracy.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.58-59
• /
• 2002

Jitter noise power at the all optical packet header processor, which uses a fiber-optic delay-line matched filter, has been calculated for various optical pulse shapes.

• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.27-33
• /
• 2018

We report the physical implementation of a tunable photonic microwave delay line filter based on injection locking of a single Fabry-Perot laser diode (FP-LD) to a reflective semiconductor optical amplifier (RSOA). The laser generates equally spaced multiple wavelengths and a single tapped-delay line can be obtained with a dispersive single mode fiber. The filter frequency response depends on the wavelength spacing and can be tuned by the temperature of the FP-LD varying lasing wavelength. For amplitude control of the wavelengths, we use gain saturation of the RSOA and the offset between the peak wavelengths of the FP-LD and the RSOA to decrease the amplitude difference in the wavelengths. From the temperature change of total $15^{\circ}C$, the filter, consisting of four flat wavelengths and two wavelengths with slightly lower amplitudes on both sides, has shown tunability of about 390 MHz.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제12권1호
• /
• pp.60-65
• /
• 2012

This paper presents a method for occluded object based motion estimation and tracking system in dynamic image sequences using particle filter with 3D reconstruction. A unique characteristic of this study is its ability to cope with partial occlusion based continuous motion estimation using particle filter inspired from the mirror neuron system in human brain. To update a prior knowledge about the shape or motion of objects, firstly, fundamental 3D reconstruction based occlusion tracing method is applied and object landmarks are determined. And optical flow based motion vector is estimated from the movement of the landmarks. When arbitrary partial occlusions are occurred, the continuous motion of the hidden parts of object can be estimated by particle filter with optical flow. The resistance of the resulting estimation to partial occlusions enables the more accurate detection and handling of more severe occlusions.

• 한국광학회지
• /
• 제15권5호
• /
• pp.409-414
• /
• 2004

본 논문에서는 광섬유 장주기 격자를 이용한 센서 신호처리 시스템을 구현하였다. SLD와 Fabry-Perot 필터를 이용한 동조 반도체 광원과 Fabry-Perot 필터내의 PZT의 히스테리시스 특성을 보상하기 위한 에탈론 필터를 사용하였으며, 절대적인 기준 파장을 제공하기 위하여 온도 안정화된 광섬유 브래그 격자를 사용하였다. 시스템에서 검출된 신호를 A/D 변환하여 컴퓨터로 입력하고 신호 처리하여 결과를 모니터상에 표시하였다.

• Journal of the Optical Society of Korea
• /
• 제13권3호
• /
• pp.330-334
• /
• 2009

A simple and compact frequency swept laser is demonstrated at $1.3{\mu}m$ using a wavelength scanning filter based on a rotating slit disk. The laser is comprised of a pigtailed semiconductor optical amplifier, a circulator, and a wavelength scanning filter in an extended cavity configuration. The wavelength scanning filter is composed of a collimator, a diffraction grating, a rotating slit disk, and a mirror. The instantaneous laser output power is more than 5 mW. The scanning range of the laser is extended to 80 nm at the maximum level, and 55 nm in the full width at half maximum at a scanning rate of 2 kHz.