• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.92-93
• /
• 2004

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.519-520
• /
• 2006

• Korean Journal of Optics and Photonics
• /
• v.21 no.5
• /
• pp.185-189
• /
• 2010

We demonstrate a single-frequency wavelength tunable erbium-doped fiber (EDF) ring laser. We used an unpumped-EDF as a saturable-absorber in order to obtain a stable single-frequency with a narrow-linewidth single-polarization mode in the ring cavity. The lasing wavelength was controlled by using bending-induced strain, such as tension and compression strain corresponding to the bending direction, applied to the fiber gratings. The fiber laser exhibited an output power of -1.85 dBm at a wavelength of 1540.72 nm for a pumping power of ~400 mW. An extinction ratio was measured to be more than 60 dB. The proposed tunable fiber laser maintains nearly the same output power while its lasing wavelength is controlled over in a wavelength range of 5 nm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1534-1541
• /
• 2000

Wavelength tunable fiber ring laser can be tuned by causing a resonance on the optical path having the least loss which is controlled by a polarization adjustment. It is observed that lasing wavelengths having 1 nm FSR(Free Spectral Range) can be tuned over the range of 1540-1560 nm when a polarization controller and an intra-cavit polarizer with 1.5 mm air gap are adjusted. The characteristics of wavelength shift in the laser output are analyzed by introducing an optical path modeling and the concept of a birefringence loss.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.2
• /
• pp.63-68
• /
• 2000

A passively mode-locked ring type fiber laser had been installed in order to get the short pulses The single and the double mode-locking were appeared, and the shortest pulse length of 65 fs was obtained with a 110 m long dispersion shifted fiber(DSF) in a local cavity of 139.8 m. Also high order harmonic modelocking of 17th and Q-switched high order harmonic modelocking were obtained.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.296-301
• /
• 1995

A single-mode erbium-doped fiber laser is constructed by using a intracore fiber Bragg grating and a unidirectional fiber loop mirror. The laser cavity is designed in such a way that the laser beam forms a travelling wave in the gain medium by placing the erbium-doped fiber inside the unidirectional loop and that the wavelength-selective feedback is made from the outside of the loop by a fiber grating with 0.2 nm reflection linewidth. An additional fiber ring resonator is constructed and used as an optical spectrum analyzer to observe the variation of the laser mode spectra. As the result, relatively stable single mode, single polarization output is observed for the most of the time except some mode hoppings in minute scale due to enviommental temperature variations. tions.

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.171-180
• /
• 1998

The low cost fiber ring laser can be tuned by controlling polarization states within the loop. In this paper, we investigate its operating principle and verify the performance through an experiment. This ring laser consists of a polarization controller and an intracavity polarizer for the wavelength tuner and semiconductor optical amplifier for the gain medium. It is seen that the lasing wavelength may be tuned through the range of 1540~1560 nm as a polarization controller and a polarizer are adjusted.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.185-186
• /
• 2007

• Korean Journal of Optics and Photonics
• /
• v.20 no.3
• /
• pp.189-194
• /
• 2009

We demonstrate a ring type wavelength swept laser incorporating a fiber Fabry-Perot tunable filter in a laser cavity using 1300 nm semiconductor optical amplifier as a gain medium. The output characteristics of the wavelength swept laser according to the applied scanning frequencies are analyzed in the temporal and spectral domain. The output of the wavelength swept laser decreases dramatically as the scanning frequency increases. And there is a significant peak power imbalance between the forward scan and the backward scan as the scanning frequency increases. Its use in practical applications might be limited.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.58-64
• /
• 2002

Using Mach-Zehnder type intensity modulator, we stabilized a 10 GHz harmonically mode-locked dispersion-compensated fiber ring laser using a feedback controlling system, and we measured its stability. The laser was stabilized for more than 16 hours by controlling the cavity length to suppress the relaxation oscillation frequency component which had caused the laser output instability. The ms timing jitter and ms amplitude noise were measured to be 260-524 fsec and 4~11.5%, respectively, and BER test measurement showed a value of 10$^{-13}$ .