• Journal of the Optical Society of Korea
• /
• v.8 no.2
• /
• pp.83-89
• /
• 2004

A variable optical attenuator with a bending-sensitive fiber (BSF) that can be used in optical networks is developed. The refractive index profile of the BSF is divided into four regions which are inner core, center dip of inner core, outer core and clad. The 3-dimensional finite difference beam propagation method (3D FD-BPM) is utilized to find the characteristics of the BSF, so the mode profile of the BSF and optical power attenuation according to the bending are investigated, and the equivalent model of the BSF is made. By using this equivalent model of the BSF, the BSF is fabricated, and the refractive index profile of the BSF is measured, which is similar to refractive index profile of the proposed BSF. The fabricated variable optical fiber attenuator (VOFA) consists of the BSF in a rectangular rubber ring with a fixed bend radius (BR) in a steady state. The VOFA using the proposed BSF was able to attenuate the optical power by more than about －38 ㏈ at certain wavelengths (1540∼1560 nm) based on adjusting the mechanical pressure applied to the upper surface of the rectangular rubber ring with the bent BSF. In addition, the proposed VOFA produced an insertion loss of 0.68 ㏈, polarization dependent loss (PDL) of about 0.5 ㏈, and return loss of less than －60 ㏈.

• Korean Journal of Optics and Photonics
• /
• v.10 no.5
• /
• pp.413-418
• /
• 1999

We report on the frequency response of microwave signal processing networks using optical fiber circuits. Microwave frequency rejection filters using Mach-Zehnder interferometer and Fabry-Perot interferometer are modelled theoretically and tested experimentally. Graphical representation method provides a simple tool for computating single mode fiber delay-line microwave filters. The calculated results are in good agreement with experimental results. A 36dB microwave frequency rejection filter is also demonstrated.

• The Magazine of the IEIE
• /
• v.30 no.3
• /
• pp.295-295
• /
• 2003

The advantages of using analogue optical networks for delivering radio signals from a central location to many remote antenna sites have been recognized. In a telecommnications context, radio signals may be for fixed radio access, cordless or mobile networks, but the same principles apply. By making use of the high bandwidth, low loss characteristics of optical fiber, all high frequency and signal processing functions can be performed centrally and signals can then be transported over the optical network directly at the carrier frequency. The remote sites then become very simple, requiring only optoelectronic conversion, filtering and linear amplification. This shifting of the complex functionality away from the remote site allow cheap, reliable, small and light-weight radio access points with low power consumption to be deployed. In this paper, we show that an electroabsorption modulation(EAM) may be used as a single component in such a radio access point, as a passive transceiver for small-sized cell(picocells).

• The Magazine of the IEIE
• /
• v.30 no.3
• /
• pp.81-85
• /
• 2003

The advantages of using analogue optical networks for delivering radio signals from a central location to many remote antenna sites have been recognized. In a telecommnications context, radio signals may be for fixed radio access, cordless or mobile networks, but the same principles apply. By making use of the high bandwidth, low loss characteristics of optical fiber, all high frequency and signal processing functions can be performed centrally and signals can then be transported over the optical network directly at the carrier frequency. The remote sites then become very simple, requiring only optoelectronic conversion, filtering and linear amplification. This shifting of the complex functionality away from the remote site allow cheap, reliable, small and light-weight radio access points with low power consumption to be deployed. In this paper, we show that an electroabsorption modulation(EAM) may be used as a single component in such a radio access point, as a passive transceiver for small-sized cell(picocells).

• Journal of Sensor Science and Technology
• /
• v.19 no.3
• /
• pp.184-190
• /
• 2010

In this paper, a remote submersion warning system based on multi-mode optical fiber(MMF) sensors and a wireless sensor network(WSN) are proposed. To improve the reliability and stability of the sensors, the dual optical fiber sensors combined to the optical coupler are demonstrated. A slave zigbee as a wireless sensor module was used as a platform to monitor and record the signal from the MMF sensors and then transmits these information to a master zigbee wirelessly. The monitoring system running the $LabVIEW^{(R)}$ software was connected to the internet to support the short message service(SMS) through extensible markup language(XML) web service. No matter where the managers are, they can always receive the real-time remote-monitoring data for safety check.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.937-944
• /
• 2002

The current fast-growing Internet traffic is demanding more and more network capacity. Photonic packet switching offers high-speed, data rate/format transparency, and configurability, which are some of the important characteristics needed in future networks supporting different forms of data. In this paper, we define that optical backbone networks for IP transport consist of optical packet core switches and optical fibers. We propose a multi-link photonic packet switch managing as single media which unifies the whole bandwidth of multiple wavelengths on the optical fiber in the WDM optical networks. The proposed switch uses optical packet memories of output link equally as well as using the WDM buffer. So it cuts down the required number of buffers and realizes of the optical packet memory economically.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.3
• /
• pp.213-219
• /
• 2017

Recently, the Internet Protocol Television (IPTV) services have become very common, enabling various Internet-based services as well as watching TV. In the IPTV system, a Set-Top box (STB) plays a key role as a network terminal device that transmits and receives realtime multimedia contents. In addition, the IPTV networks are usually supported by broadband optical fiber-base network such as fiber-to-the-home (FTTH), However, a general IPTV STB is regarded as one of the local area network (LAN)-attached devices while sharing the bandwidth of the LAN (e.g., Ethernet). In order to overcome the limited bandwidth utilization by fully facilitating the broadband bandwidth (e.g., 1 Gbps) of the optical fiber-based network, we propose a new FC (Fiber Channel)-embedded IPTV STB which can be directly attached to the optical fiber network. Then, we verify that the impacts of the proposed FC-embedded IPTV STB by organizing the the FC-AL (Fiber Channel-Arbitration Loop) network equipped with the FC-embedded IPTV We measures the average Start-up Delay, Average Reject Ratio and the Number of Concurrent Users through extensive simulations to investigate the performances of the suggested FC-AL-based IPTV network. Surprisingly, the IPTV network architecture with the proposed FC-embedded IPTV STBs has an excellent average start-up delay of less than 10 msec, an acceptable average reject ratio of less than 3 % as well as a linear increase of the number of concurrent users when extending the architecture. This reveals that the proposed FC embedded STB has a superior impacts on the performance of the entire IPTV network by effectively utilizing the broadband bandwidth of the fiber optic-based network.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.3-9
• /
• 2016

In this paper, we propose a Radio over Fiber system for small cell applications and for mobile fronthaul networks supporting cloud-radio access networks(RAN). We built a system with a downlink employing orthogonal frequency division multiplexing (OFDM) techniques and an uplink using single carrier-frequency multiple access(SC-FDMA). System parameters are evaluated for various subcarrier modulations and the results of link performance measurements are analyzed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.5
• /
• pp.10-17
• /
• 1994

Two protocols inclouding the receiver collision avoidance function are proposed for high-speed optical fiber LANs with finite users. The basic idea to avoid receiver collision is the grouping of destination nodes by the number of channels and it is accomplished in the architecture with or without one separate control channel. While the protocol with a control channel requires a tunable optical transmitter, a fixed optical transmitter and two fixed optical receiver, the other protocol requires a tunable optical transmitter and one fixed optical receiver. The performance of two receiver collision avoidance protocols is computed and analyzed under various system parameters. The numerical results show that the receiver collision avoidance protocol has better performance for a small load than the protocol without receiver collision avoidance.

• Current Optics and Photonics
• /
• v.4 no.3
• /
• pp.186-192
• /
• 2020

This paper describes a real-time monitoring system in Ethernet passive optical networks (EPON) that uses burst-mode fiber Bragg grating (FBG) optical sensors. The FBG interrogation unit in the optical line terminal (OLT) transmits the monitoring wavelength to optical network units (ONUs). The FBG sensor unit in each ONU returns a burst-mode monitoring signal to the OLT. As the system applies time division multiple access (TDMA), a uniform Bragg wavelength can be used to monitor the EPON system. The FBG interrogation unit analyzes the received burst-mode monitoring signals and outputs fault information on the ONU branches in EPON. The simulation results show the effectiveness of the proposed monitoring system based on TDMA. In addition, we compared the proposed TDMA-based monitoring system with a WDMA-based monitoring system.