• 제목/요약/키워드: optical fabrication

검색결과 1,658건 처리시간 0.036초

Fabrication of Micro-Photonic Component in Silica Glass with Femtosecond Laser Pulses

  • Watanabe, Wataru;Itoh, Kazuyoshi
    • Journal of the Optical Society of Korea
    • /
    • 제8권1호
    • /
    • pp.21-28
    • /
    • 2004
  • When femtosecond laser pulses are focused inside the bulk of transparent materials, the intensity in the focal volume becomes high enough to produce permanent structural modifications. This technique has been applied to fabricate three-dimensional photonic structures such as optical memory, waveguides, gratings, and couplers inside a wide variety of transparent materials. In this paper, we review the fabrication of optical elements in glasses with femtosecond laser pulses, including the fabrication of waveguides, couplers, Bragg gratings, zone plates, holographic memory, and micro holes.

LIGA 공정을 이용한 평면형 광소자용 Ni 마스터 제작 (Fabrication of Ni master for the replication of planar optical devices by LIGA process)

  • 김진태;정명영
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.945-949
    • /
    • 2003
  • LIGA(Lithographie Galvanoformung Abformung), a fabrication method for the production of microstructrues with a high aspect ratio, is now playing an important role in a fabrication of polymeric optical waveguide device as the replication processes have been developed such as hot embossing and injection molding. The present report deals with the fabrication of Ni master used for the replication of multi-mode polymeric optical waveguide. With the basic technological features in the sequence of the LIGA technique, we fabricated Ni master with 12 channel microstructures of $100\;{\times}\;100{\mu}m\;^2{\times}\;60mm$, and achieved an accuracy of ${\pm}1\;{\mu}m$. Manufactured polymeric optical wavegude with the same using hot embossing process has also the same accuracy and approved its mass production capability.

  • PDF

Small Form Factor 광 디스크 드라이브용 초소형 집적형 광픽업 개발 (Development of Integrated Optical Pickup for Small Form Factor Optical Disc Drive)

  • 조은형;손진승;이명복;서성동;김해성;강성묵;박노철;박영필
    • 정보저장시스템학회논문집
    • /
    • 제2권3호
    • /
    • pp.163-168
    • /
    • 2006
  • Small form factor optical pickup (SFFOP) corresponding to BD specifications is strongly proposed for the next-generation portable storage device. In order to generate SFFOP, small sized optical pickup has been fabricated. We have developed a small sited optical pickup that is called the integrated optical pickup (IOP). The fabrication method of this system is mainly dependant on the use of the wafer based micro fabrication technology, which has been used in MEMS process such as photolithography, reactive ion etching, wafer bonding, and packaging process. This approach has the merits for mass production and high assembling accuracy. In this study, to generate the small sized optical pickup for high recording capacity, IOP corresponding to BD specifications has been designed and developed, including three main parts, 1) design, fabrication and evaluation of objective lens unit, 2) design and fabrication of IOP and 3) evaluation process of FES and TES.

  • PDF

Recent development of polymer optical circuits for the next generation fiber to the home system

  • Kaino, Toshikuni
    • 한국고분자학회:학술대회논문집
    • /
    • 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
    • /
    • pp.13-14
    • /
    • 2006
  • The use of soft-lithography instead of standard photolithography and dry etching technologies is attractive because inexpensive optical device can be realized. Polymerization using multi-photon absorption of materials is also a good method for optical waveguide fabrication. Laser induced self-writing technology of optical waveguide is also very simple and attractive. Using these processes, we can fabricate and interconnect optical circuits at once. In this presentation, several simple fabrication methods will be introduced. New optical loss evaluation method for polymer optical waveguides will also be presented

  • PDF

새로운 기능의 집적형광 Filter의 개발에 관한 연구 제 2부 : 광필터의 제작 및 특성의 개선 (Development of Integrated Optical Filter with New Function -Part 2: Fabrication and Improvement of Optical Filter)

  • 金東一;Yoshiyuki Naito
    • 대한전자공학회논문지
    • /
    • 제23권6호
    • /
    • pp.840-845
    • /
    • 1986
  • In this Part II of the paper, we evaluated the fabrication error and dividing characteristics for the opticalfilters proposed in the Part I. Furthermore, we propose an integrated optical filter with a new function that can eliminate the fabdrication error. The fabrication method and filtering characteristics have been tested by experiments, thereby confirming the validity of the design theory.

  • PDF

등온압축성형공법을 이용한 폴리머 렌즈 성형 (Isothermal Compression Molding for a Polymer Optical Lens)

  • 오병도;권현성;김순옥
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회A
    • /
    • pp.996-999
    • /
    • 2008
  • Aspheric polymer lens fabrication using isothermal compression molding is presented in this paper. Due to increasing definition of an image sensor, higher precision is required by a lens which can be used as a part of an imageforming optical module. Injection molding is a factory standard method for a polymer optical lens. But achievable precision using injection molding has a formidable limitation due to the machining of complex mold structure and melting and cooling down a polymer melt under high pressure condition during forming process. To overcome the precision requirement and limitation using injection molding method, isothermal compression molding is applied to fabrication of a polymer optical lens. The fabrication condition is determined by numerical simulations of temperature distribution and given material properties. Under the found condition, the lens having a high precision can successfully be reproduced and does not show birefringence which results often in optical degradation.

  • PDF

The Fabrication of a Photonic Crystal Fiber and Measurement of its Properties

  • Kim, Jin-Chae;Kim, Ho-Kyung;Paek, Un-Chul;Lee, Byeong-Ha;Eom, Joo-Beom
    • Journal of the Optical Society of Korea
    • /
    • 제7권2호
    • /
    • pp.79-83
    • /
    • 2003
  • In this paper, we describe the fabrication process of a photonic crystal fiber and present the measured optical properties of the photonic crystal fiber. The fabrication of the photonic crystal fiber involves stacking, jacketing, collapsing, and drawing using a conventional drawing tower The photonic crystal fiber drawing needs higher tension to maintain the uniform air hole structure. Thus, the temperature of the photonic crystal fiber drawing is lowered by a few hundred degrees Celsius than for the case of conventional optical fiber drawing. The optical properties of the fabricated photonic crystal fiber such as mode profile, optical loss, transmission spectrum, bending loss, and polarization dependent loss are measured.

Fabrication of Phase Plate to Simulate Turbulence Effects on an Optical Imaging System in Strong Atmospheric Conditions

  • Han-Gyol Oh;Pilseong Kang;Jaehyun Lee;Hyug-Gyo Rhee;Young-Sik Ghim;Jun Ho Lee
    • Current Optics and Photonics
    • /
    • 제8권3호
    • /
    • pp.259-269
    • /
    • 2024
  • Optical imaging systems that operate through atmospheric pathways often suffer from image degradation, mainly caused by the distortion of light waves due to turbulence in the atmosphere. Adaptive optics technology can be used to correct the image distortion caused by atmospheric disturbances. However, there are challenges in conducting experiments with strong atmospheric conditions. An optical phase plate (OPP) is a device that can simulate real atmospheric conditions in a lab setting. We suggest a novel two-step process to fabricate an OPP capable of simulating the effects of atmospheric turbulence. The proposed fabrication method simplifies the process by eliminating additional activities such as phase-screen design and phase simulation. This enables an efficient and economical fabrication of the OPP. We conducted our analysis using the statistical fluctuations of the refractive index and applied modal expansion using Kolmogorov's theory. The experiment aims to fabricate an OPP with parameters D/r0 ≈ 30 and r0 ≈ 5 cm. The objective is defined with the strong atmospheric conditions. Finally, we have fabricated an OPP that satisfied the desired objectives. The OPP closely simulate turbulence to real atmospheric conditions.

Nonlinear Optical Fibers for Electro-optic Applications

  • Han, Won-Taek;Kim, Bok-Hyeon
    • 세라미스트
    • /
    • 제10권3호
    • /
    • pp.15-27
    • /
    • 2007
  • Fabrication and electro-optic applications of glass optical fibers were reviewed. Theoretical description on the electro-optic Kerr effect in glass optical fibers, particularly for the second-order optical nonlinearity was given. Fabrication procedure and the characterization of the nonlinear electro-optic fibers with internal electrodes were described. Several electro-optic devices based on the polarimetric cells made by the nonlinear optical fibers with internal electrodes were also discussed with the experimental results on the electro-optic effect.

  • PDF

홀로그래픽 광학소자 개발 (Development of holographic Optical Elements)

  • 정만호;송재봉;이인원
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 1990년도 광학 및 양자전자학 워크샵
    • /
    • pp.87-93
    • /
    • 1990
  • Estimation and collection of the suitable recording materials are important for the fabrication of the holographic optical elements. In this study, silver halide emulsion, photoresist and dichromated gelatin are selected as a recording materials to investigate the properties and processing methods. Some parameters which affect the diffraction efficiencies of the holographic optical elements (HOE) are presented. As an example of the HOE, the results of design and the fabrication method of the off axis 12P hologram lens are also presented.

  • PDF