• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.83-86
• /
• 2002

본 연구는 태양광시스템의 센서와 프로그램 (타이머스위치)을 혼용한 제어시스템을 측정한 결과이다. 집광부 렌즈 초점의 정확도에 따른 효율 저감을 평가한 결과 실제 그 차이는 조사부 50cm 떨어진 곳에서 0.1lx 에서 5000lx 값 차이를 나타났다. 이는 태양광조명의 가장 중요한 핵심이 바로 태양추적의 정확성에 있는 것이다.

• Journal of the Optical Society of Korea
• /
• 제8권4호
• /
• pp.149-155
• /
• 2004

Newly developed modal transmission-line theory(MTLT) is used to analyze rigorously the optical power distribution in grating-assisted directional couplers(GADCs) with three guiding channels. By defining a novel coupling efficiency ${\eta}$ amenable to the rigorous analytical solutions of modal transmission-line theory, we explicitly evaluate the power coupling and distribution of TM modes. The results reveal that the incident power is sensitively partitioned through three output channels in terms of such grating parameters as the grating period, the duty cycle, and the operating wavelength.

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.6-12
• /
• 2012

We present the optical models and calculation results of thin-film organic solar cells (OSCs) at oblique incidence of light, using the transfer matrix method. The simple expression for the optical power dissipation is derived at oblique incidence for s- and p-polarized light. The spatial distribution of the electric field intensity, the optical power density, and the optical power dissipation are calculated in both s- and p-polarized light with respect to the incidence angle. We identify how the light absorption efficiency for p-polarized light becomes relatively larger than that for s-polarized light as the incidence angle increases.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1355-1360
• /
• 2003

Currently, product of optical collimator for optical communication is depending on handiwork, and some companies are propelling semi-automatic system composite of manual and automatic operations. In this point of time, the importance of automatic system of optical collimator for optical communication is taking its place as a core technology in the development of parts with high-efficiency of optical communication. In order to develop such an optical collimator in this study, we designed an automatic assembly system, and developed a software for the system operation. At a result of that, we could carry out a single work process individually running processes of collimator fabrication, a constant work process constantly running all of the processes, and performance evaluation of the collimator.

• 연구논문집
• /
• 통권32호
• /
• pp.23-34
• /
• 2002

Up to now, collimators have teen generally produced by handwork and only a few companies have produced by semi-automatic system. Under this situation, automatic system for assembly of optical collimators has risen as a mast essential technique in the development of optical communication components. In this study, it was constructed to develop optical collimators with high functionality and we manufactured optical collimators with a GRIN rod lens and spherical lens using automatic system. Therefore, we worked a performance test through a comparison of collimators made by automatic system and handwork with angle augment, bean size. Also we selected a optimum assembly condition of GRIN rod lens and spherical lens. As a result, it brought a reduction of the tact time and an improvement of an efficiency and a productivity of optical collimators, therefore it was found that automatic system was indispensable for materialization of optical collimators with high functionality.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.119-122
• /
• 2002

Collimators were mostly produced by handwork and semi-automatic system in some companies. Under this situation, automatic manufacturing system for optical collimators is on the rise most essential technique in the development of optical communication components. In this study, automatic manufacturing system was designed and constructed to develop optical collimators with high functionality. Also optical collimators were manufactured using a developed automatic system. We have compared collimators made by automatic system and handwork fer performance test with a measured values of angle alignment, beam size and TIL. As a result, it brought a reduction of the tact time fur manufacturing and improvement of an efficiency of optical collimators, and then it was found that automatic system was indispensable for materialization of optical collimators with high functionality.

• Journal of the Optical Society of Korea
• /
• 제20권3호
• /
• pp.335-342
• /
• 2016

We demonstrate an optical asynchronous transfer mode/wavelength division multiplexing (OATM/WDM) optical access network, using a router based on an optical header decoder to conduct next-generation communications. The router consists of a decoder or hardware analysis processing of the header bit and switches. The router in the OATM/WDM optical access network is a key technology by which to satisfy subscribers’ requests, including reliability, cost efficiency, high speed, large-capacity transmission, and elevated information security. In this study, we carry out experiments in which a header decoder delivers to 16 and 32 subscribers with a single wavelength in the router. These experiments confirm the decoder’s successful operation via hardware using 4 and 5 header bits. We propose that this system may significantly contribute toward the realization of an optical access network that provides high-quality service to subscribers of next-generation communications.

• 소성∙가공
• /
• 제11권7호
• /
• pp.589-595
• /
• 2002

Up to now, Collimators have been generally produced by handwork and only a few companies have produced by semi-automatic system. Under this situation, automatic system for assembly of optical collimator has risen as a most essential technique in the development of optical communication components. In this study, it was constructed to develop optical collimators with high functionality and We manufactured optical collimators with a GRIN rod lens using automatic system. Therefore, we worked a performance test through a comparison of collimators made by automatic system and handwork with angle alignment, beam size. Also we compared common product with auto-manufactured sample. As a result, it brought a reduction of the tact time and an improvement of an efficiency and a productivity of optical collimators. therefore it was found that automatic system was indispensable for materialization of optical collimators with high functionality.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.131-131
• /
• 2010

The power of semiconductor laser diodes has been limited primarily by the heating effects which occur at high optical intensities. The actual limiting event can take one of a number of forms such as. catastrophic optical damage or filamentation. A general approach to this problem is to design a heterostructure which creates a high powered output while maintaining low internal optical intensities. A graded index separate confinement heterostructure (GRIN-SCH) is one such structure that accomplishes the above task. Here, the active region is sandwiched between graded index layers where the index of refraction increases nearer to the active layer. This structure has been shown to yield a high efficiency due to the confinement of both the optical power and carriers, thereby reducing the optical intensity required to achieve higher powers. The optical confinement also reinforces the optical beam quality against high power effects. Quantum dots have long been a desirable option for laser diodes due to the enhanced optical properties associated with the zeroth dimensionality. In our work, we use PICS3D software created by Crosslight Software Inc. to simulate the performance of In0.67A10.33As/A10.2Ga0.8AsquantumdotsusedwithaGRIN-SCH. The simulation tools are used to optimize the GRIN-SCH structure for high efficiency and optical beam quality.

• 한국광학회지
• /
• 제30권4호
• /
• pp.146-153
• /
• 2019

노광기는 회로 패턴을 원하는 위치에 전사시켜주는 장비로 패턴을 광학적 특성의 변형 없이 기재 상에 나타내기 위해서는 노광광학계의 특성이 매우 중요하다. 따라서 미세회로 패턴을 형성하기 위해서는 조사 면적에 작은 발산각으로 입사되어야 한다. 또한, 광원에서 나온 빛이 감광제와 균일하게 반응해야 하기 때문에 높은 광효율과 조도 균일도를 가져야 한다. 본 논문에서는 협각 구현의 문제점을 해결하기 위한 방법으로 반사형 타입인 파라볼라 반사경과 비구면 렌즈 설계를 진행하였고, 배열 후 시뮬레이션 분석 결과 광속 각도, 균일도, 최대조도가 목표 성능을 만족하는 것을 확인하였다.