• 정보저장시스템학회논문집
• /
• 제11권1호
• /
• pp.6-10
• /
• 2015

Optical library system consists of disc magazines, cabinets, transfer robot and drive. Transfer robot delivers desired disc or magazine in cabinet to drive which reads data of disc. Conventional archive system stores discs in a line and transfer robot moves in one dimension. However, to store more discs, new optical archive system, optical library system, is developed which stores discs in two dimension like bookcase. Transfer robot should know the position and stored data of desired magazine to get correct data. In this paper, addressing algorithm using optical character recognition is proposed. Proposed algorithm is evaluated by experiments with implemented system.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.145-149
• /
• 2005

We describe holographic ROM system to read bit-type data. It has optical system similar to general optical data storage system such as DVD. But because holographic data storage systems have to adopt imaging optical system, in our system bit-type data can be read out by different servos with DVD. We devised 3-hole method similar to 3- beam method for the tracking servo and used astigmatic optical system for the focusing servo. Also we developed the reference beam servo to measure movement of reference beam because especially holographic data storage systems need reference beam. The system was operated by these three servos and objective lens of NA 0.6. We obtained eye pattern from random data of 3T-2um track pitch. We also obtained another eye pattern from DVD disk by only using focusing servo PDIC in our system to verify the compatibility with DVD.

• 정보저장시스템학회논문집
• /
• 제2권4호
• /
• pp.224-229
• /
• 2006

There has been studied flow to minimize the spot size to increase data capacity. Optical data storage devices are being developed near practical limits with wavelength and NA of 405nm and 0.85. There has been studied many types of next generation storage devices such as blu-ray multilayer system, probe based data storage and holographic data storage. Among these data storage devices, solid immersion lens(SIL) based near field recording (NFR) has been widely studied. In this system, SIL is the key component that focuses the laser beam with a very small size which enables ultra high data capacity. Therefore, optical performance evaluation system is required for SIL assembly. In this dissertation, a simple and accurate SIL assembly measurement method is proposed with wedge plate lateral shearing interferometer(LSI). Wedge plate LSI is cheaper than commercialized interferometer, robust to the vibration and the moving distance for phase shifting is large that is order of micrometer. We designed the thickness, wedge angle, material, surface quality and wavelength of wedge plate as 1mm, 0.02degree, fused silica, lamda/10(10-5) and 405nm, respectively. Also, we confirmed simulation and experimental results with quantitative analysis. This simple wedge plate LSI can be applied to different types of SIL such as solid immersion mirror(SIM), hemispherical, super-hemispherical and elliptical SIL.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.678-681
• /
• 2003

In conventional optical data storage numerical aperture (NA) cannot be over 1 because of diffraction limit. To overcome this limitation. solid immersion lens(SIL) have produced a great interest in near-field optical data storage. In conventional optical recording method, the dual lens system using object lens and SIL had been studied generally. But the conventional SIL system has some critical problems that must be solved. The problems are heat, contamination. alignment of optical components and so on. To solve these problems. this work proposes enhanced SIL which has several advantages for mechanical and optical issues. This new SIL system named elliptic SIL(ESIL) can use evanescent energy in near-field more effectively. In addition. because of applying the inside recording unlike previous surface recording, ESIL can clear up the problems. The design and analysis of ESIL art executed by using CODE V. Also, in this paper we composed actual data recording system and achieved recording experiment by applying ESIL to magneto-optical recording. In conclusion. we analyze the improvement of aerial density and the reasonability of application to real data storage system.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권4호
• /
• pp.319-323
• /
• 2002

In this paper, we consider the track-following control problem in the optical data storage systems in the presence of the eccentricity. The eccentricity results in the radial deviation of the objective lens so that it degrades the reliability of the data decoding system. To cope with the eccentricity, an adaptive disturbance compensation technique is newly proposed in the time domain based on a disturbance observer of reduced order, which effectively estimates the low frequency components of the disturbance. The proposed compensator is simply added to the conventional feedback control. The error dynamics of the observer and the sensitivity analysis are given to illustrate the effectiveness of the proposed approach. Finally, through experiments in an optical storage system, the feasibility of the proposed approach is verified.

• 정보저장시스템학회논문집
• /
• 제10권1호
• /
• pp.27-31
• /
• 2014

Optical Archive system consists of cartridge, drive and transfer robot. Transfer robot moves disc in cartridge to drive that reads data of disc. Distance between disc in cartridge and transfer robot very short, about 4mm. When disc projects, there is a danger of collision. Collision can cause breakage of disc and breakdown of system. To prevent collision of disc and transfer robot, projection of disc should be detected. In this paper, we proposed error monitoring method of projecting disc in archive data storage using camera. Proposed algorithm is evaluated by experiments with archive system.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.110-140
• /
• 1998

One of the problems facing in all modern dental hospitals is the much efforts, manpower and space are needed to effectively sort and stack patients' charts of the various dental departments. In addition, the storage and prompt arrangement of x-ray films is also a problem. Therefore, if dental charts as well as films could be computerized, it would be easier to store and keep them; by data basing, many space, manpower and cost would be saved: data could also be effectively managed for the purpose of academic researches. This would be an epoch -making event in the development of dental hospital management. The purpose of this study is to develop a dental information processing program, that will be used to store dental treatment records and digital image data using a new record media, the optical card. The patients' charts from the dental hospital were selected. The treatment records of the chart were put into the treatment data -recording area of the program, and the digital images of various dental x-ray films were made with a scanner. These data were stored in the optical card and analyzed to get the following results: 1. In this program it is possible to put treatment records and image data into and out from the optical card, and it is impossible to correct and delete all data recorded on the optical card. 2. All data in the optical card system can be searched and analyzed on database. 3. The resolution of image data stored in optical card is above 5.9 lp/mm. 4, All data of dental charts used as samples, stored to optical cards, occupies average 14%, In conclusion, with the development of the storage system using the optical card, a dental patient's life-time treatment record can be stored in one optical card and used as a substitute for the dental chart.

• 정보저장시스템학회논문집
• /
• 제11권1호
• /
• pp.1-5
• /
• 2015

The selective frequency analysis method is suggested in the holographic data storage system with the nyquist aperture to reduce the size of hologram. The image filter was designed with many different methods to improve the bit error rate caused by the nyquist aperture. In previous the methods of image restoration for HDS, an iteration time and a highly precise point spread function were necessary. In this paper, we describe the optical system with analytic method. Thereby, we expect our result help the researchers to design the filter.

• 제어로봇시스템학회논문지
• /
• 제5권1호
• /
• pp.47-53
• /
• 1999

CD-ROM(Compact Disk-Read Only Memory) is very attractive storage media because it has much storage space but is small size and portable. Optical pickup, one of the most important parts for reading data on a CD-ROM, is not produced tuned up. For the use of goods, we must tune up the optical pickup by adjusting the screw for adjustment. First, we developed analog servo system for optical pickup tuners. For eliminating some problems in analog servo system, this paper designed the modeling of digital servo system for optical pickup tuner. Though the characteristics of optical pickup are changed, the digital servo system for optical pickup tuner can easily apply to all pickup, and can reduce the measurement error among the optical pickup tuners. For the purpose of confirming the designed digital servo system, we produced data that specify the disk vibration and the disk eccentricity, and simulated servo system with MATLAB.

• Journal of the Optical Society of Korea
• /
• 제13권4호
• /
• pp.456-463
• /
• 2009

We introduce a holographic data storage system for intermediating between small data sets and mass holographic data recording. It employs a holographic sequentially superimposed recording technique. We discuss a time scheduling technique for making uniform reconstruction of sequentially recorded holograms and we show experimental results. We also discuss the Bragg selectivity of sequentially recorded holograms. The maximum storage density of our system is estimated to be 224kbit/$mm^2$. Our system is useful as an intermediate recording system before recording mass holographic data in a larger system.