• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.523-526
• /
• 1987

The present metering transformer being used for measurement has the characteristics of high reliability and high efficiency. In the future, however, it is thought that the scales of mettering transformer will be larger and the cost of production will increase as the transmission voltage ascends to UHV. And, also, it wilt be not easy to ensure the aseismatic capability. For the purpose of settling these problems, by applying optical sensor technology to electric power systems and by developing optical current transformer and potential transformer, we will realize the saving in energy, reduction of cost prise, improvement in measuring precision.

• 분석과학
• /
• 제28권1호
• /
• pp.8-16
• /
• 2015

We prepared a novel electrochemical gas sensor (EG sensor) based on interdigitated electrode (IDE) coated with vinyl ionic liquids (ILs) as electrolyte and Pt-Ru-Mo/MWNT electrocatalysts for occurring redox-active of CNCl gas. The vinyl ILs such as 1-butyl-3-(vinylbenzyl)imidazolium chloride, $[BVBI]^+Cl^-$, and 3-hexyl-1-vinylimidazolium bromide, $[HVI]^+Br^-$, were synthesized by $SN_2$ reaction in order to use electrolyte. The Pt-Ru-Mo/MWNT electrocatalysts were also prepared by one-step radiation-induced reduction of metal ions in the presence of MWNTs as supports. The fabricated EG sensor with vinyl ILs electrolyte was evaluated through optical microscopy (OM), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The prepared EG sensor is clearly detected over 2.0 ppm CNCl gas and is exhibited a liner relationship between current and concentration over a region of 10-100 ppm.

• 항공우주산업기술동향
• /
• 제6권1호
• /
• pp.124-134
• /
• 2008

The rising demand for the high efficiency and high covertness in UAV motivates the miniature design of the high performing mission sensors, or payloads. One of the promising payload sensors, EO/IR sensor has evolved satisfying its demands and became the main stand-alone mission sensor for 200kg-range UAV. One aspect in development of EO/IR sensor concerns lack of specification criterions to represent its performance. Even though the high demand and competition among each manufacturer caused EO/IR features subject to rapid change collateral to new technology, the datasheets maintained the conventional outdated formats which leave some of the major components in ambiguity. Making comparisons or predicting actual performance with such datasheets is hardly worthwhile; yet, they could be important reference guide for the potential customers what to expect for the upcoming EO/IR. According to UAS Roadmap 2007-2032 published by DoD, one of the main potential customers as well as a main investor of EO/IR technology, EO/IR is expected to play key roll in solving urgent problems, such as see and avoid system. This paper will examine the recent representative EO/IR specialized in UAS missions through datasheets to find out current trend and eventually extrapolate the possible future trend.

• 센서학회지
• /
• 제30권6호
• /
• pp.364-368
• /
• 2021

We developed a highly efficient organic photovoltaic (OPV) cell with a poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b']dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-)-2-carboxylate-2-6-diyl)]:[6,6]-phenyl-C71-butyric acid methyl ester active layer for harvesting lower-intensity indoor light energy to power various self-powered sensor systems that require power in the microwatt range. In order to achieve higher power conversion efficiency (PCE), we first optimized the thickness of the active layer of the OPV cell through optical simulations. Next, we fabricated an OPV cell with optimized active layer thickness. The device exhibited a PCE of 12.23%, open circuit voltage of 0.66 V, short-circuit current density of 97.7 ㎂/cm², and fill factor of 60.53%. Furthermore, the device showed a maximum power density of 45 ㎼/cm², which is suitable for powering a low-power (microwatt range) sensor system.

• Current Optics and Photonics
• /
• 제2권6호
• /
• pp.612-622
• /
• 2018

In wave-front-sensor-less adaptive optics (WFS-less AO) systems, the Jacopo Antonello (JA) method belongs to the model-based class and requires few iterations to achieve acceptable distortion correction. However, this method needs a lot of measurements, especially when it deals with moderate or severe aberration, which is undesired in free-space optical communication (FSOC). On the contrary, the stochastic parallel gradient descent (SPGD) algorithm only requires three time measurements in each iteration, and is widely applied in WFS-less AO systems, even though plenty of iterations are necessary. For better and faster compensation, we propose a WFS-less hybrid approach, borrowing from the JA method to compensate for low-order wave front and from the SPGD algorithm to compensate for residual low-order wave front and high-order wave front. The correction results for this proposed method are provided by simulations to show its superior performance, through comparison of both the Strehl ratio and the convergence speed of the WFS-less hybrid approach to those of the JA method and SPGD algorithm.

• 전기학회논문지
• /
• 제56권11호
• /
• pp.1992-1994
• /
• 2007

In this paper we propose a cryogenic sensor system which can measure the temperature at higher resolution at low temperature using temperature-dependent amplified spontaneous emission of erbium-doped fiber pumped by a 1480 nm laser diode. The measurement resolution of the sensor system could be enhanced through the modulation of injection current of the pump laser diode. The measurement resolution considering the fluctuation of the light source in the sensor system was ${\sim}0.4$ K in the room temperature regime and ${\sim}0.07$ K in the liquid nitrogen temperature regime.

• 통합자연과학논문집
• /
• 제3권4호
• /
• pp.237-240
• /
• 2010

Recently, number of studies for porous silicon have been investigated by many researchers. Multistructured porous silicon (PSi), distributed Bragg reflector (DBR) PSi, has been a topic of interest, because of its unique optical properties. DBR PSi were prepared by an electrochemical etch of $P^{{+}{+}}$-type silicon wafer of resistivity between 0.1 $m{\Omega}cm$ with square wave current density, resulting two different refractive indices. In this work, We have fabricated a simple and portable organic vapor-sensing device based on DBR porous silicon and investigated the optical characteristics of DBR porous silicon. DBR porous silicon have been characterized by FT-IR, Ocean optics 2000 spectrometer. The device used DBR PSi chip has been demonstrated as an excellent gas sensor, showing a great senstivity to a toxic vapor (TEP, DMMP, DEEP) at room temperature.

• Current Optics and Photonics
• /
• 제3권4호
• /
• pp.336-341
• /
• 2019

This paper proposes an optical system where the organic compound content in water is determined by using an ultraviolet (UV) LED (280 nm) and photodetector. The results obtained by the proposed prototype LED spectroscopy system, which includes a single photodetector and two parallel sample holders, are calculated by applying partial least square regression; the values are highly correlated with the actual concentrations of potassium hydrogen phthalate solutions, with an adjusted coefficient of determination about 0.996. Moreover, the total organic carbon values derived from the UV-Vis spectrometer of real samples (lake, river and sea water) differed little from those obtained by the LED spectroscopy. We confirm that the fast, sensitive, and compact LED sensor system can be readily configured for real-time monitoring of organic compounds in water.

• 한국광학회지
• /
• 제7권4호
• /
• pp.419-427
• /
• 1996

광섬유전류센서에서 온도변화에 따른 감도변화를 제거하기 위한 연구를 하였다. 센서헤드로는 두개의 원형틀을 수직으로 결합하고 여기에 광섬유를 번갈아 감아서 사용하였다. 이 경우 수직한 원형틀은 광섬유의 고유편광축을 상호수직하게 하므로 감겨진 광섬유에 발생된 선형복굴절량을 상쇄하여 최소화할 수 있었다. 이렇게 제작된 전류센서는 온도에 대해 보다 안정된 성능을 보였다. 센서헤드부의 온도는 약 1시간 40분동안 20-45.deg.C의 느린 변화를 주었다. 이때의 전체적인 센서 오차는 .+-.1.2% 정도였고 500A에서 3시간동안 안정성 측정을 했을 경우 .+-.1%미만의 변화를 보였다. 센서의 헤드부 전후단의 광섬유에 의해서 신호의 요동이 생기는 것을 방지하기 위한 방법으로 센서헤드부에 편광기와 편광분할기를 놓고 리드부와 분리를 했다. 광원으로서는 두개의 레이저 다이오드를 편광이 수직이 되게 배열함으로써 무편광 광원으로서의 효과를 내었다. 신호처리는 각 채널별로 분리를 하여 기계적인 부분에 의한 광손실의 영향을 배제하였다.

• 대한전자공학회논문지SD
• /
• 제41권6호
• /
• pp.33-41
• /
• 2004

본 논문에서는, 편광측정법에 의한 광섬유 전류 센서(P-FOCS)를 실험·제작하여, 실제 필드에 적용할 수 있는 P-FOCS의 상용화 가능성에 대하여 연구하였다. P-FOCS는 인가된 전류에 의해 발생한 자기장에 비례하는 Faraday 회전각을 측정함으로서 인가된 전류를 측정한다. P-FOCS의 센싱 광섬유로는 저복굴절 광섬유를 사용하여 밴딩에 의한 선복굴절의 영향을 최소화하였으며, 벌크(bulk)한 광학소자의 사용으로 인한 광 손실을 막기 위해 전 광섬유 소자를 사용하였다. 또한, 구성된 신호처리회로는 광섬유 소자들의 연결부에서의 손실로 인한 출력 신호의 강도 변화를 제거하기 위해 사용된다. Faraday 회전각은, 632.8nm 파장의 광원을 이용하여 권선수가 약 1500인 솔레노이드에 전류를 인가해 7500A의 전류원의 효과를 얻도록 하여, 솔레노이드 내부에 센싱 광섬유를 통과시켜 측정하였다. $1000A{\sim}7500A$ 범위에서, 선형성의 측정 오차는 약 1.5% 이내였다.