• 대한의용생체공학회:의공학회지
• /
• 제32권3호
• /
• pp.270-277
• /
• 2011

Laser cartilage reshaping(LCR) is a promising method for reshaping cartilage by using laser irradiation to maintain permanently modifies its shape. However this method has not been fully understood due to the limited scientific researches. The purpose of this study is to analyze optical and thermal characteristics of cartilage during laser irradiation. After analyzing Monte Carlo simulation for the comparison of laser fluence distributions with different laser wavelengths the characterization of the spectral changes during Nd:YAG laser(${\lambda}$ = 1444 nm) irradiation was investigated in the ranges of 900-1700 nm with double integrating spheres. The surface temperature distribution changes during laser irradiation were investigated with an infrared camera. The quantitative measurements of optical and thermal characteristics in cartilage after laser irradiation were correlated with the transition of water flux(from bound to free water) and this study may be useful for better understanding of biophysical transformation phenomena in cartilage after laser heating.

• 한국광학회지
• /
• 제32권6호
• /
• pp.266-275
• /
• 2021

본 논문은 Korsch 망원경의 열분석을 통한 광학계 성능 평가 방법 및 비열화 구조를 연구하였다. 비대칭성의 복잡한 구조를 가진 광학계의 경우, 광학 설계 소프트웨어에 열팽창 계수를 적용하여 인공위성 구조를 구현하는데 한계가 있어 온도 변화에 대한 광학계 성능 평가가 이루어지기 어렵다. 이러한 문제점을 해결하기 위해 기계 설계 소프트웨어를 이용하여 온도에 따라 광학계에 영향을 주는 모든 구조체에 길이 변화를 구현하였고, 온도 변화에 대한 광학 부품 사이의 거리 변화량을 정리하였다. 또한 광학 설계 소프트웨어를 이용하여 온도 변화에 대한 광학 부품의 형상 및 두께 변화량을 정리하였다. 두 소프트웨어에서 도출한 모든 변화량을 광학 소프트웨어에 적용하여 광학계의 성능 평가를 진행하였다. 그 결과 공간 분해능 71.4 cycles/mm에 대한 변조전달함수(MTF)가 9 ℃에서 33 ℃까지의 범위에서 25% 이상 유지되는 것을 확인하였다. 또한 광학계 성능 변화에 가장 영향을 많이 주는 구조체를 찾아, 영향을 줄이도록 비열화 구조를 도출하여 개선된 구조물을 적용한 광학계의 성능 평가를 진행하였다. 그 결과, 분해능 71.4 cycles/mm에 대한 변조전달함수가 9 ℃에서 33 ℃까지의 범위에서 67% 이상 유지되는 것을 확인하였다.

• 공업화학
• /
• 제24권3호
• /
• pp.320-326
• /
• 2013

본 연구에서는 저온경화 공정으로 합성한 다양한 폴리이미드의 물성 변화를 이해하기 위하여 4,4'-oxydianiline (ODA) 단일 다이아민(diamine)에 여러 가지 주쇄(backbone)를 가지는 산무수물(dianhydride)들을 [4,4'-oxydiphthalicanhydride (ODPA), 4,4-hexafluoroisopropylidenediphthalic dianhydride (6FDA), 3,3', 4,4'-benzophenonetetracarboxylic dianhydride (BTDA)]사용하였다. 폴리아믹산(poly(amic acid); PAA)의 합성 후, 저온경화 촉매인 1,4-diazabicyclo[2.2.2]octane (DABCO)를 여러 wt%로 첨가하여 폴리이미드 박막을 제작하고 촉매를 넣지 않은 박막과 FT-IR, UV-Vis 투과도, DSC/TGA, WAXD 분석을 통해 그 특성 변화를 비교 분석하였다. 촉매를 이용한 폴리이미드의 저온경화 시 산무수물의 종류에 따라 광학특성 및 열특성 변화량의 차이가 나타났고, 이는 촉매에 의한 mean intermolecular distance의 감소량이 산무수물의 주쇄구조에 따라 다르기 때문으로 확인되었다. 1 wt%의 촉매를 사용 시 광학특성 증가는 최대가 되고 열특성 저하는 최소가 됨을 확인하였다. 이러한 실험결과를 통해 촉매를 이용한 저온경화 폴리이미드 박막의 특성변화는 그 화학구조와 밀접한 관련이 있음을 확인할 수 있다.

• Current Optics and Photonics
• /
• 제6권1호
• /
• pp.69-78
• /
• 2022

A high-resolution camera is a precise optical system. Its vibrations during transportation and launch, together with changes in temperature and gravity field in orbit, lead to different degrees of defocus of the camera. Thermal refocusing is one of the solutions to the problems related to in-orbit defocusing, but there are few relevant thermal refocusing mathematical models for systematic analysis and research. Therefore, to further research thermal refocusing systems by using the development of a high-resolution micro-nano satellite (CX6-02) super-resolution camera as an example, we established a thermal refocusing mathematical model based on the thermal elasticity theory on the basis of the secondary mirror position. The detailed design of the thermal refocusing system was carried out under the guidance of the mathematical model. Through optical-mechanical-thermal integration analysis and Zernike polynomial calculation, we found that the data error obtained was about 1%, and deformation in the secondary mirror surface conformed to the optical index, indicating the accuracy and reliability of the thermal refocusing mathematical model. In the final ground test, the thermal vacuum experimental verification data and in-orbit imaging results showed that the thermal refocusing system is consistent with the experimental data, and the performance is stable, which provides theoretical and technical support for the future development of a thermal refocusing space camera.

• The Journal of Advanced Prosthodontics
• /
• 제12권1호
• /
• pp.9-14
• /
• 2020

PURPOSE. The aim of this study was to investigate the effect of different numbers of heat treatments applied to superstructure porcelain on optical, thermal, and phase formation properties of zirconia. MATERIALS AND METHODS. Forty zirconia specimens were prepared in the form of rectangular prism. Specimens were divided into four groups (n = 10) according to the number of firing at heating values of porcelain. Color differences and translucency parameter were measured, and X-ray diffraction (XRD) analysis and differential scanning calorimetry (DSC) were performed. Data were analyzed with analysis of variance (ANOVA). RESULTS. There were no statistically significant differences in ∆E, TP, L, a, and b value changes of the zirconia specimens as a result of repetitive firing processes (P>.05). CONCLUSION. Although additional firing processes up to 4 increase peak density in thermal analysis, additional firing processes up to 4 times can be applied safely as they do not result in a change in color and phase character of zircon frameworks.

• 한국전기전자재료학회논문지
• /
• 제28권5호
• /
• pp.306-313
• /
• 2015

In this study, the change of optical characteristics was studied according to the micro optical pattern provided by photo lithography followed by thermal reflow process. The shape and luminance variation with micro pattern was evaluated by SEM and spectrometers. Also, we analyzed the luminance characteristics using the 3D-optical simulation (Optis works) program. As a result, we found that the radius of curvature(R) in micro pattern is decreased up to 77%($150^{\circ}C$) compared to the radius of curvature at the condition $100^{\circ}C$, which is caused by efficient reflow of organic material without chemical changes. The highest enhancement of brightness with optimum micro pattern was obtained at the condition of $120^{\circ}C$ reflow process. The brightness gain with optical micro patterns is more than 15% at the condition of R=16.95 um, ${\Theta}=77.14^{\circ}$ compared to original optical source. The results of light simulation with various radius of curvature and side angle of pattern shows the similar result of experiment evaluation of light behavior on optical micro patterns. It is regarded that the more effect on light enhancement was contributed by side angle which is effective factor on light reflection, rather than the curvature of micro-patterns.

• Journal of the Optical Society of Korea
• /
• 제15권3호
• /
• pp.237-243
• /
• 2011

Thermal characteristics, such as diffusivity and temperature induced change in the fiber mode index of rotation sensing fiber coil are critical factors which determine the time varying, thermo-optically induced bias drift of interferometric fiber-optic gyroscopes (IFOGs). In this study, temperature dependence of the transient effect is analyzed in terms of the thermal characteristics of the fiber coil at three different temperatures. By applying an analytic model to the measured bias in the experiments, comprehensive thermal factors of the fiber coil could be extracted effectively. The validity of the model was confirmed by the fact that the extracted values are reasonable results in comparison with well known properties of the materials of the fiber coil. Temperature induced changes in the critical factors were confirmed to be essential in compensating the transient effect over a wide temperature range.

• 한국태양에너지학회 논문집
• /
• 제35권4호
• /
• pp.9-15
• /
• 2015

Black cobalt solar selective coatings were prepared by using an electroplating method. The changes in the optical properties of the black cobalt selective coating due to thermal degradation were analyzed by using the Auger electron spectroscopy (AES) and spectrophotometer. The black cobalt selective coating was prepared on a copper substrate by using a synthesized electrolyte with $CoCl_2$ and KSCN at a current density of ${\sim}0.5A/dm^2$ for 45s ~ 60s. Its optical properties were a solar absorptance (${\alpha}$) of the order of 0.80 ~ 0.84 and a thermal emittance (${\epsilon}$) of 0.01. From the AES depth profile analysis of heated sample, thermal degradation of the black cobalt selective coating heated for 33 hours at temperature of $350^{\circ}C$ occurred primarily due to interdiffusion at interface of cobalt and copper substrate. This results were predictable that the ${\alpha}$ decreases due to the thermal oxidation and diffusion.

• 한국진공학회지
• /
• 제12권S1호
• /
• pp.7-9
• /
• 2003

Solid-state reactions in Ni/Si multilayered films (MLF) with an overall stoichiometry of $Ni_2Si$, NiSi and $NiSi_2$, induced by ion-beam mixing (IBM) and thermal annealing, were studied by using spectroscopic ellipsometry and magneto-optical spectroscopy as well as x-ray diffraction (XRD). The mixing was performed with Ar+ ions of an energy of 80 keV and a dose of $1.5 x\times10^{16}$ $Ar^+$/$\textrm{cm}^2$. It was shown that the IBM induces structural changes in the Ni/Si MLF, which cannot be detected by XRD but are confidently recognized by the optical method. A thermal annealing at 673 K of the Ni/Si MLF with an overall stoichiometry of NiSi and $NiSi_2$ causes formation of the first η -NiSi phase. The first trace for $NiSi_2$ phase on the background of NiSi one was detected by XRD after an annealing at 1073 K while, according to the optical results, $NiSi_2$ turns out be the dominant phase for the annealed Ni/Si MLF with an overall stoichiometry of $NiSi_2$.

• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.41-48
• /
• 2016

To investigate the effect of long-term thermal aging on the microstructural and mechanical characteristics of weldment made of nickel base alloy and its weld metal, an accelerated heat treatment was applied to simulate the process of long-term thermal aging in the operating condition of nuclear power plant. A representative nickel-based weldment with Alloy 600 and Alloy 182 was fabricated and heat-treated at $400^{\circ}C$ for 1,713 h and 3,427 h to simulate the thermal aging for the period equivalent to 15 and 30 years in operating pressurized water reactors, respectively. The microstructural and mechanical characteristics were analyzed by using optical microscopy, scanning electron microscopy and Vickers microhardness measurement. Changes were observed in precipitation behavior and microhardness of each specimen, and these changes were mainly attributed to the change in precipitated morphology and residual stress across the weld during the thermal aging process.