• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.17-25
• /
• 2000

ATM PON은 수동 광 분배망에서 ATM셀을 전송하는 가입자망으로서 다양한 형태의 가입자를 하나의 통합된 플랫폼에서 처리할 수 있기 때문에 차세대 엑세스망의 해법으로 간주된다. 본 논문에서는 ATM PON이 가지고 있는 장점과 그것이 동작하기 위한 핵심적인 프로토콜을 살펴본다. 그 중에서도 ranging은 시스템에서 시분할 다중화 액세스를 가능하게 하는 가장 중요한 프로토콜이다. 이 프로토콜의 문제점은 ranging 셀이 도착하는 시간구간, 즉 윈도우가 너무 길다는 것이다. 이 기간 동안 상향으로 가입자 트래픽을 전달할 수 없으므로, 서비스 품질이 저하될 가능성이 매우 높다. 이 논문에서는 광케이블의 길이를 어느 정도의 오차를 갖고 알고 있을 때 윈도우 길이를 최소화하는 방안을 제시한다. 제시된 알고리즘을 사용할 경우, 광케이블의 길이가 1 Km 변이를 가질 때 기존 방법에 비해 윈도우 길이가 7 %에 지나지 않는 성능 향상을 얻을 수 있다.

• 한국통신학회논문지
• /
• 제36권6B호
• /
• pp.642-649
• /
• 2011

본 논문은 다중 대역에서 동작하는 안테나를 장착한 차세대 이동통신 기지국 시스템의 도입 가능성 분석을 위해 종래의 기지국 시스템과 케이블 손실전력을 고려한 차세대 기지국 시스템의 전력 손실 및 탄소 절감효과를 분석하였다. 차세대 기지국 시스템은 옥외에 무선처리부를 설치하고, 옥내의 기저대역처리부는 광케이블로 연결하여 종래의 기지국에서 케이블로 인해 발생하는 전력손실을 없애는 구조이다. 본 연구 결과 종래의 기지국과 비교하여 동일한 서비스 커버리지 확보가 가능하고, 케이블 전력손실이 5 dB 줄어든 차세대 기지국 시스템을 도입할 경우 CDMA 20W, WCDMA 30W, WiBro 10W 기지국에서 소모하는 전력량은 연간 155,078 MWh에서 49,038 MWh로 감소시킬 수 있으며, 탄소배출량 또한 65,878 $tCO_2$에서 20,832 $tCO_2$로 절감됨을 확인하였다. 따라서 차세대 기지국 시스템은 그린 IT 기술로 이용 가능할 것으로 고찰되었다.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.146-159
• /
• 2015

Since the power capacity needed for the propulsion of large ships is very large, a multiphase AC induction propulsion mode is generally adopted to meet the higher requirements of reliability, redundancy and maintainability. This paper gives a detailed description of the development of a 20MW fifteen-phase PWM driver for advanced fifteen-phase propulsion induction motors with a special third-harmonic injection in terms of the main circuit hardware, control system design, experiments, etc. The adoption of the modular design method for the main circuit hardware design can make the enclosed mechanical structure simple and maintainable. It can also avoid the larger switch stresses caused by the multiple turn on of the IGBTs in conventional large-capacity converter systems. The use of the distributed controller design method based on a high-speed fiber-optic ring net for the control system can overcome such disadvantages as the poor reliability and long maintenance times arising from the conventional centralized controller which is designed according to point-to-point communication. Finally, the performance of the 20MW PWM driver is verified by experimentation on a new fifteen-phase induction propulsion motor.

• 한국군사과학기술학회지
• /
• 제15권6호
• /
• pp.812-819
• /
• 2012

Interference and jamming are becoming increasing concern to a radar system nowdays. AESA(Active Electronically Steered Array) antennas and adaptive beamforming(ABF), in which antenna beam patterns can be modified to reject the interference, offer a potential solution to overcome the problems encountered. In this paper, we've developed a planar active phased array radar system, in which ABF, target detection and tracking algorithm operate in real-time. For the high output power and the low noise figure of the antenna, we've designed the S-band TRMs based on GaN HEMT. For real-time processing, we've used wavelenth division multiplexing technique on fiber optic communication which enables rapid data communication between the antenna and the signal processor. Also, we've implemented the HW and SW architecture of Real-time Signal Processor(RSP) for adaptive beamforming that uses SMI(Sample Matrix Inversion) technique based on MVDR(Minimum Variance Distortionless Response). The performance of this radar system has been verified by near-field and far-field tests.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.464-464
• /
• 2010

A few years ago, for maintaining high stability and production yield of production equipment in a semiconductor fab, on-line monitoring of wafers is required, so that semiconductor manufacturers are investigating a software based process controlling scheme known as virtual metrology (VM). As semiconductor technology develops, the cost of fabrication tool/facility has reached its budget limit, and reducing metrology cost can obviously help to keep semiconductor manufacturing cost. By virtue of prediction, VM enables wafer-level control (or even down to site level), reduces within-lot variability, and increases process capability, $C_{pk}$. In this research, we have practiced VM on $SiO_2$ etch rate with optical emission spectroscopy(OES) data acquired in-situ while the process parameters are simultaneously correlated. To build process model of $SiO_2$ via, we first performed a series of etch runs according to the statistically designed experiment, called design of experiments (DOE). OES data are automatically logged with etch rate, and some OES spectra that correlated with $SiO_2$ etch rate is selected. Once the feature of OES data is selected, the preprocessed OES spectra is then used for in-situ sensor based VM modeling. ICP-RIE using 葰.56MHz, manufactured by Plasmart, Ltd. is employed in this experiment, and single fiber-optic attached for in-situ OES data acquisition. Before applying statistical feature selection, empirical feature selection of OES data is initially performed in order not to fall in a statistical misleading, which causes from random noise or large variation of insignificantly correlated responses with process itself. The accuracy of the proposed VM is still need to be developed in order to successfully replace the existing metrology, but it is no doubt that VM can support engineering decision of "go or not go" in the consecutive processing step.

• 대한의용생체공학회:의공학회지
• /
• 제27권4호
• /
• pp.154-163
• /
• 2006

A 64-channel magnetocardiogram (MCG) system using low-noise superconducting quantum interference device (SQUID) planar gradiometers was developed for the measurements of cardiac magnetic fields generated by the heart electric activity. Owing to high flux-to-voltage transfers of double relaxation oscillation SQUID (DROS) sensors, the flux-locked loop electronics for SQUID operation could be made simpler than that of conventional DC SQUIDs, and the SQUID control was done automatically through a fiber-optic cable. The pickup coils are first-order planar gradiometers with a baseline of 4 em. The insert has 64 planar gradiometers as the sensing channels and were arranged to measure MCG field components tangential to the chest surface. When the 64-channel insert was in operation everyday, the average boil-off rate of the dewar was 3.6 Lid. The noise spectrum of the SQUID planar gradiometer system was about 5 fT$_{rms}$/$\checkmark$Hz at 100 Hz, operated inside a moderately shielded room. The MCG measurements were done at a sampling rate of 500 Hz or 1 kHz, and realtime display of MCG traces and heart rate were displayed. After the acquisition, magnetic field mapping and current mapping could be done. From the magnetic and current information, parameters for the diagnosis of myocardial ischemia were evaluated to be compared with other diagnostic methods.

• Journal of Information Processing Systems
• /
• 제13권5호
• /
• pp.1243-1258
• /
• 2017

A new medical materials scheduling system and its modeling method for the complex rescue are presented. Different from other similar system, first both the BeiDou Satellite Communication System (BSCS) and the Special Fiber-optic Communication Network (SFCN) are used to collect the rescue requirements and the location information of disaster areas. Then all these messages will be displayed in a special medical software terminal. After that the bipartite graph models are utilized to compute the optimal scheduling of medical materials. Finally, all these results will be transmitted back by the BSCS and the SFCN again to implement a fast guidance of medical rescue. The sole drug scheduling issue, the multiple drugs scheduling issue, and the backup-scheme selection issue are all utilized: the Kuhn-Munkres algorithm is used to realize the optimal matching of sole drug scheduling issue, the spectral clustering-based method is employed to calculate the optimal distribution of multiple drugs scheduling issue, and the similarity metric of neighboring matrix is utilized to realize the estimation of backup-scheme selection issue of medical materials. Many simulation analysis experiments and applications have proved the correctness of proposed technique and system.

• Journal of Yeungnam Medical Science
• /
• 제12권2호
• /
• pp.331-338
• /
• 1995

18마리 가토의 양측 대뇌반구에 laserthemia후 발생하는 조직학적 변화와 온도변화에 따른 변성의 측정결과는 아래와 같다. 주된 조직학적 변화는 chromatin 응축, myelin 응축, 적혈구 탈색, nuclear waving, nuclear palisading과 세포괴사 등이었다. 온도 변화에 따른 변성의 정도는 $44.5^{\circ}C$이상에서 현저하였으며, 비교치 설명후 그 범위도 약 5배(1.25 mm)정도의 변화를 보였다. Laserthermia에 의한 세포괴사는 $47.5^{\circ}C$이상에서부터 현저하게 보였다. 뇌의 심부병소의 정위적 수술시 온도설정 및 병소치료 범위의 예상이 가능하다.

• Smart Structures and Systems
• /
• 제6권5_6호
• /
• pp.641-659
• /
• 2010

Structural Health Monitoring (SHM) gradually becomes a technique for ensuring the health and safety of civil infrastructures and is also an important approach for the research of the damage accumulation and disaster evolving characteristics of civil infrastructures. It is attracting prodigious research interests and the active development interests of scientists and engineers because a great number of civil infrastructures are planned and built every year in mainland China. In a SHM system the sheer number of accompanying wires, fiber optic cables, and other physical transmission medium is usually prohibitive, particularly for such structures as offshore platforms and long-span structures. Fortunately, with recent advances in technologies in sensing, wireless communication, and micro electro mechanical systems (MEMS), wireless sensor technique has been developing rapidly and is being used gradually in the SHM of civil engineering structures. In this paper, some recent advances in the research, development, and implementation of wireless sensors for the SHM of civil infrastructures in mainland China, especially in Dalian University of Technology (DUT) and Harbin Institute of Technology (HIT), are introduced. Firstly, a kind of wireless digital acceleration sensors for structural global monitoring is designed and validated in an offshore structure model. Secondly, wireless inclination sensor systems based on Frequency-hopping techniques are developed and applied successfully to swing monitoring of large-scale hook structures. Thirdly, wireless acquisition systems integrating with different sensing materials, such as Polyvinylidene Fluoride(PVDF), strain gauge, piezoresistive stress/strain sensors fabricated by using the nickel powder-filled cement-based composite, are proposed for structural local monitoring, and validating the characteristics of the above materials. Finally, solutions to the key problem of finite energy for wireless sensors networks are discussed, with future works also being introduced, for example, the wireless sensor networks powered by corrosion signal for corrosion monitoring and rapid diagnosis for large structures.

• Smart Structures and Systems
• /
• 제6권5_6호
• /
• pp.595-618
• /
• 2010

This paper describes the application of a wireless sensor network to a 31 meter-tall medieval tower located in the city of Trento, Italy. The effort is motivated by preservation of the integrity of a set of frescoes decorating the room on the second floor, representing one of most important International Gothic artworks in Europe. The specific application demanded development of customized hardware and software. The wireless module selected as the core platform allows reliable wireless communication at low cost with a long service life. Sensors include accelerometers, deformation gauges, and thermometers. A multi-hop data collection protocol was applied in the software to improve the system's flexibility and scalability. The system has been operating since September 2008, and in recent months the data loss ratio was estimated as less than 0.01%. The data acquired so far are in agreement with the prediction resulting a priori from the 3-dimensional FEM. Based on these data a Bayesian updating procedure is employed to real-time estimate the probability of abnormal condition states. This first period of operation demonstrated the stability and reliability of the system, and its ability to recognize any possible occurrence of abnormal conditions that could jeopardize the integrity of the frescos.