• Journal of The Korean Association For Science Education
• /
• v.9 no.1
• /
• pp.19-37
• /
• 1989

The purpose of this study was to investigate the development of logical thinking and scientific reasoning pattern of Korean high school students. To carry out this study subjects were selected about 2,000 Junior high school students, and about 4,100 senior high school students throughout the nation. They were identified as concrete, transitional or formal operational stage with the use of TOLT(the Test of Logical Thinking) by Tobin and Capie(1980), and TOSR(the Test of Scientific Reasoning) by W.A Farmer(1986). This study turned out that more than 76% of Junior high school students were classified as the concrete operational stage and about 44% of senior high school students were classified as the formal operational stage, while about 26% of them were still in the concrete operational level. This study showed that the main factor of the intellectual development of students is learning by the gradual advancement of their grades and especially entrance into the senior high school rather than by the physical growth. This study also showed that there are the take-off stage of the development of logical thinking between fourteen and fifteen years of their ages. Less than 25% of junior high school students were in the formal operational stages which are capable of control of variables, probabilistic, correlation and combinational logic in problem-solving situation, while 33-54% of senior high school students were in the formal operational levels. 38% of junior high school students were in the formal operational stage which is capable of proportional logic, while about 55% of senior high school students were in the formal operational stage. Less than 20% of senior high school students were classified as group of highly capable of scientific reasoning, while more than 23% of them were classified as group of poor capability. It also turned out that there are differences or no differences between male and female students of each school in problem-solving situation regarding each logic approach. These differences were proved to be fluctuating depending on the situations and their grades. The other results of this study is similar to those of other researches such as Tomlinson-Keasey 1972, Coleman 1973, Lawson 1973, Lawson and Renner 1974, Neimark 1975, Han 1982, and Kim 1989.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.81-82
• /
• 2013

HVDC 시스템은 초고압 직류 송전 시스템으로써, AC를 DC로 변환하여 장거리 송전에 유리한 시스템이다. 현재 대륙간 송전 및 주파수 변환을 위한 BtB Topology에 많이 응용되고 있다. HVDC 시스템의 장점은 일정 송전거리 이상이 되면, DC가 AC에 비하여 손실율이 적고 유리한 장점이 있다. 해당 HVDC Valve는 전력을 AC-DC-AC로 변환하려면, HVDC Valve(Module)이라고 불리는 전력 변환 장치가 필수적이다. 해당 Valve를 현장에 설치하기 전에 IEC 60700-1 또는 CIGRE 같은 국제 표준 규격에 맞추어 Type Test를 진행 후에 통과 시 현장에 설치되어야 한다. 해당 Type Test는 크게 2가지로 분류되며, 절연 성능을 시험하기위한 Dielectric Test 그리고, 실제 Thyristor Valve의 동작을 가혹 한 조건에서 시험하기위한 Operational Test가 필요하다. 본 논문은 IEC 규격 (IEC 60700-1)에 의거 사이리스터 밸브에 대한 Operational Test 중 단락시험방법과 시험내용을 기술하고, 시험결과로 검증한다.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.2
• /
• pp.154-160
• /
• 2008

There are typically two categories of Flight Test Programs- commercial and military. Commercial flight testing is conducted to certify that aircraft meets all applicable safety and performance requirements of government certifying agency. Military programs differs from commercial in that the government contract with the aircraft manufacturer to design and build an aircraft to meet specific mission capabilities. The final phase of military aircraft flight test is the Operational Test(OT). OT is conducted by a government-only test team with the dictate to certify that the aircraft is suitable and effective to carry out the intended mission. This paper presents the current trends of military aircraft airworthiness certification using civil aircraft certification practices.

• Journal of Information Technology Services
• /
• v.15 no.2
• /
• pp.51-63
• /
• 2016

In this study, we conducted a comparative analysis of R&D investment efficiency and operational efficiency of IT firms using Data Envelopment Analysis (DEA). We categorized thirteen sample firms into two groups-IT manufacturing and IT service-after an extensive literature review on IT industry classification. We adopted an output-oriented two-stage DEA model suggested by Banker et al. (1984) with total asset and R&D investment as input variables. Then, we constructed investment efficiency and operational efficiency by using Return on Equity (ROE) and Return on Asset (ROA) as intervening variables and operating income and Earnings Per Share (EPS) as output variables. The outcome of the analysis is summarized as follows. First of all, IT manufacturing firms were more efficient (57% on average) than IT service firms. To be specific, IT service firms showed decreasing returns to scale (DRS) with diseconomy of scale. In contrast, IT service firms showed higher operational efficiency (81.5% on average) than IT manufacturing firms. Also, we conducted a Mann-Whitney U test to compare the output of IT service firms and IT manufacturing firms. Lastly, we found a negative correlation ($R^2$ = -.754) between R&D investment efficiency and operational efficiency which infers the trade-off between two constructs

• Korean Management Science Review
• /
• v.21 no.2
• /
• pp.111-122
• /
• 2004

Measuring performance of corporate information system has become one of the core issues in that development of the information system requires substantial amount of investments and the system works as a crucial leverage to enhance competitive edge. Most of the previous researches for performance of the information system have narrow and limited focus on such as the effect of user satisfaction and productivity. This paper suggests a model to measures the comprehensive performance which is classified as user scope (user involvement and satisfaction), operational scope (task productivity, task innovation, customer satisfaction, management control) and efficiency scope (financial performance), and to represent the relationship among the scopes by the path analysis model. Followings are conclusions from statistical hypothesis test of the model: (i) user involvement through user satisfaction has positive effect on all the performances in the operational scope, (ii) task innovation and customer satisfaction in the operational scope has statistically significant impact on financial performance but task productivity and management control do not. This conclusion indicates that task productivity and management control has the long term effect in nature, and evaluation of the information system has managerial implication when it Is measured in comprehensive performance which includes internal operational performances as well as financial performance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.717-725
• /
• 2011

In the power system with an electric storage system that can increase utilization rate of the source of such new renewable energy, this paper introduces the approach on the daily unit commitment scheduling that determines simultaneously optimum operational condition and output of thermal generators and electric storage device. The unit commitment is one of the most important issues in economic operation and security of short-term operational plan of the power system. It is to determine on/off status of generator to minimize operational cost during the given period. The committed generator should satisfy various operational limitation such as estimated demand by system, spinning reserve condition within minimum operational cost. In order to determine on/off or charge/discharge/idle condition and output level of units and electric storage system, the MILP(Mixed Integer Linear Programming) is suggested. The proposed approach is the mixed method between LP(Linear Programming) and IP(integer programming) which seeks the value of real number and integer that maximize or minimize function objective within given condition. The daily unit commitment problem with the electric storage system is applied to MILP algorithm through linearization and formulation process. The proposed approach is applied to the test system.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.109-115
• /
• 2021

This study aims to examine the effect of Operating Costs and Income, Loan to Deposit Ratio on the Return on Asset (ROA) of Public-Private Foreign Exchange Banks listed on the Indonesia Stock Exchange (IDX) during the 2015-2018 period. This study is a quantitative study using financial reports of Public-Private Foreign Exchange Banks listed on the IDX as a data source. This study's population is 25 Public-Private Foreign Exchange Banks listed on the IDX. This study uses purposive sampling to determine the sample to produce 21 banking companies. Data was analyzed using multiple linear regression methods and descriptive statistics. The F Test calculation results state that all the variables of free operating expenses, operating income, and the loan to deposit ratio simultaneously and significantly affect the return on assets (ROA) variable in Public-Private Foreign Exchange Banks listed on the IDX. This study's results indicate that simultaneously Operational Costs, Operational Income, and Loan to Deposit Ratio have a significant effect on ROA. Operational Costs and Operational Income have a significant negative impact on Return on Assets. The third hypothesis shows that the Loan to Deposit Ratio has a positive and insignificant effect on Return on Assets.

• Korea Trade Review
• /
• v.44 no.3
• /
• pp.25-42
• /
• 2019

This research examined the mediation effect of Workforce Agility (WA) on the relationship between environmental uncertainty and operational performance. We manipulated the control variables that are known to be affected by employment flexibility. Employment flexibility is caused by idiosyncratic characteristics of Korean port system. The analysis was tested by Baron & Kenny's method. The result indicates that each path of the proposed model is significant. Furthermore, the mediation effect was checked with the Sobel Test. The research revealed that environment uncertainty poses an indirect effect on operational performance. Both supply/demand uncertainty and technological uncertainty affected operational performance through the mediation effect of WA. Most of the distribution centers located in Busan Newport Distripark are operated in a bimodal labor (human resource) system which includes both permanent employees (workers) and temporary employees (workers). This empirical research provides theoretical and managerial implications by suggesting ways to increase efficiency in distribution center operation through WA enhancement, and to improve the unloading labor system.

• Journal of Aerospace System Engineering
• /
• v.1 no.3
• /
• pp.13-20
• /
• 2007

The objective of this study is to investigate endurance test of localization part for T-50 aircraft engine. Major localization parts of the engine (F404-STW-102) was performed using Accelerated Simulated Mission Engine Test. The purpose of this test is to evaluate of quality demonstration capability, to verify design of engine localization parts, and to improvement safety and operation rate of T-50 advanced trainer by finding out operational problems in production phase and fixing it.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.840-840
• /
• 2003

Operational Modal Analysis (OMA) is a technique for identification of modal parameters by measurement of only the system's response. On many lightweight structures, such as load-speaker cones and disk drive read/write heads, is impossible or impractical to measure the input forces. Another characteristic of lightweight structure is their sensitivity to mass loading from sensors. The Scanning Laser Doppler Vibrometry(SLDV) allows response measurements to be taken without mass loading. One disadvantage of OMA testing compared to tradition input output modal testing is the OMA mode shapes are un-scaled. This means that the mode shape obtained from an OMA test can not used for analytical structural modification studies. However, the un-scaled mode shapes from an OMA test can be used to update a Finite Element Model (FEM). The updated FEM can then be used to analytically predict the effect of structural modifications. This paper will present the results of an OMA test performed on a simple plate and motor in operating conditions. The un-scaled mode shapes from this test will be used to update a FEM model of the system. The updated FEM model will be then be used to predict the effect of attaching a mass to the plate. The shapes predicted by the FEM for the modified system will be compared to a second OMA test on the modified system