• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권4호
• /
• pp.433-445
• /
• 2011

Duty cycle is determined as the ratio of operating time to total time. Duty cycle in reliability prediction is one of the significant factors to be considered. In duty cycle application, non-operating time failure rate has been easily ignored even though the failure rate in non-operating period has not been proved to be small enough. Ignorance of non-operating time failure rate can result in over-estimated system reliability calculation. Furthermore, utilization of duty cycle in reliability prediction has not been evaluated in its effectiveness. In order to address these problems, two reliability models, such as MIL-HDBK-217F and RIAC-HDBK-217Plus, were used to analyze non-operating time failure rate. This research has proved that applying duty cycle in 217F model is not reasonable by the quantitative comparison and analysis.

• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1862-1870
• /
• 2020

The purpose of this study is to investigate the effect of welding residual stress on operating stress in designing a nuclear turbine welded rotor. A two-dimensional axisymmetric finite element model is employed to calculate the residual stress before and after post weld heat treatment (PWHT), and then the superposition of residual stress after PWHT and operating stress at normal speed and overspeed were discussed. The investigated results show that operating stress can be affected significantly by welding residual stress, and the distribution trend of superposition stress at the weld area is mainly determined by welding residual stress. The superposition of residual stress and operating stress is linear superposition, and the hoop stress distribution of superposition stress is similar with the distribution of residual stress. With the increasing overspeed, the distribution pattern of the hoop superimposed stress remains almost unchanged, while the stress level increases.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.177-179
• /
• 2006

This paper presents an analysis architecture of embedded operating systems for wireless sensor network. Wireless multi-hop sensor networks use battery-operated computing and sensing device. We expect sensor networks to be deployed in an ad hoc fashion, with very high energy constraints. These characteristics of multi-hop wireless sensor networks and applications motivate an operating system that is different from traditional embedded operating system. These days new wireless sensor network embedded operating system come out with some advances compared with previous ones. The analysis is focusing on understanding differences of dominant wireless sensor network OS, such as TinyOS 2.0 with TinyOS 1.x.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1336-1342
• /
• 2022

Risk-informed safety classification of structures, systems and components (SSCs) is very important for ensuring the safety and economic efficiency of nuclear power plants (NPPs). However, previous methods for safety classification of SSCs do not take the plant operating modes or the operational process of SSCs into consideration, thus cannot concentrate on the safety and economic efficiency accurately. In this contribution, a new method for safety classification of SSCs based on the categorization of plant operating modes is proposed, which considers the NPPs operating history to improve the economic efficiencies while maintaining the safety. According to the time duration of plant configurations in plant operating modes, average importances of SSCs are accessed for an NPP considering the operational process, and then safety classification of SSCs is performed for plant operating modes. The correctness and effectiveness of the proposed method is demonstrated by application in an NPP's safety classification of SSCs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.637-640
• /
• 2009

The LCD based on Kerr effect is highly interesting because it uses an optically isotropic state with no need of alignment layer and it shows sub-millisecond response time. The problem of the device is that it requires very high operating voltage and the transmittance is relatively low compared with other LCDs that use nematic LC. In this work, we study on various electrode structures and driving method which can lower operating voltage.

• 한국산학기술학회논문지
• /
• 제16권7호
• /
• pp.4349-4356
• /
• 2015

본 연구는 현재 우리나라 컨테이너터미널에 적용가능한 친환경 운영기술 요인들을 도출하고, 관련 실무자들을 대상으로 한 실증분석을 통하여 친환경 컨테이너터미널 운영기술들에 대한 항목별 중요도와 만족도의 차이를 Importance-Performance Analysis로 검증함으로써 친환경 컨테이너터미널 운영기술에 대한 향후 방안을 제시하고자 하였다. 본 연구의 결과로 친환경 컨테이너터미널 운영기술 평가항목들 중 '빈이동 최소화'가 가장 중요한 요소로, '전기식 TC'가 가장 만족한 항목으로 분석되었다. 20개의 친환경 컨테이너터미널 운영기술 항목들은 '터미널 안벽시스템', '터미널 야드시스템', '터미널 접안지원 시스템'의 3개 요인으로 도출되었다. 이러한 결과들은 향후 우리나라 친환경 컨테이너터미널에 관련한 운영 정책수립 및 관리지침에 기여할 것으로 기대된다.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.260-267
• /
• 2013

A combat system for navy's battleship is a system of systems who supports naval indigenous operations by integrating and inter-operating many different kind of weapon and non-weapon systems, which has characteristics of large-scale complex computing system. This paper considers a characteristics of naval combat system which has been developed by domestic technology and suggests a way to improve future naval combat system in terms of computing architecture by applying commercial real-time operating system technologies. This paper also provides an evaluation criteria for combat system adaptability of real-time operating systems.

• 한국군사과학기술학회지
• /
• 제27권5호
• /
• pp.581-587
• /
• 2024

The mast structure of a naval ship has a lot of expensive equipment attached and is easily exposed to strong vibration due to its structural characteristics, so it is necessary to manage vibrations well to prevent equipment failure and increase operating time. Since September 2015, the Navy has been managing the vibration of the ship's mast structure with a separate tolerance standard from the local vibration, but this standard is set at 1/2 of the vibration limits for mast-mounted equipment without any engineering basis. So the establishment of new vibration limits based on the operating conditions of naval ships is required. In this study, the mast structure vibration limits were reviewed considering the actual operating time of naval ships, and the results were compared with the standards of major overseas classification societies and the actual measurements of a ship that had mast structure vibration problems.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.173-182
• /
• 2014

PURPOSES : The purpose of the study is to a) explore the operating speed of trucks on rural highways affected by road geometry, and thereby b) develop a predictive model for the operating speed of trucks on rural highways. METHODS : Considering that most of the existing studies have focused on cars, the current study aimed to predict the operating speed of trucks by conducting linear regression analysis on the speed data of trucks operating on the linear-curved-linear portions of the road as a single set. RESULTS : The operating speed in the plane curve portion increased with the length of the curve, and decreased with a lower vertical grade and a smaller curve radius. In the straight plane portion, the operating speed increased with a larger curve radius(upstream), and decreased with an increase in the change of the vertical grade, depending on the length of the vertical curve. CONCLUSIONS : This study developed estimation models of truck for operational speed and evaluated the degree of safety for horizontal and vertical alignments simultaneous. In order to represent whole area of the rural highway, the models should be ew-analyzed with vast data related with road alignment factor in the near future.

• 한국수소및신에너지학회논문집
• /
• 제23권6호
• /
• pp.604-611
• /
• 2012

For the commercialization of fuel cell powered vehicle, it is highly important to improve the performance and efficiency of an automotive polymer electrolyte membrane fuel cell (PEMFC) system. The performance and efficiency of PEMFC systems are significantly influenced by their operating conditions. Among these conditions, the system operating pressure is considered as the one of the main factors. In this study, to investigate the effects of operating pressure on the performance and efficiency of automotive PEMFC systems, two types of high-pressure operating PEMFC systems adopting two different compressors (i. e. different performance maps) are modeled by using MATLAB/Simulink environment. The PEMFC system efficiency and parasitic compressor power are mainly analyzed and compared for the two types of high-pressure operating PEMFC systems under the same system net power conditions. It is expected that this kind of study can contribute to provide basic insight into the operating strategies of high-pressure operating PEMFC systems for automotive use.