• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1885-1887
• /
• 1996

Power transformers are the most important facilities in the substation of electrical power, yet they do not have the efficient operating life characteristics which are the important elements of repairing and maintenance in regional conditions. This paper describes the statistical analysis of operating conditions and troubles on transformers for the operating life assessment using Statistical Analysis System programs, Hazard method and Weibull distributions. We analyze transformers in several methods, and compares correlation relationship of operating life and troubles. Therefore, this study will be the useful basic operating life prediction technique of power transformers in the future.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.678-683
• /
• 2000

The one-dimensional performance model of a torque converter has been widely used to analyze and predict the performance and dynamic behavior of a torque converter. But this model doesn't include the information of the operating fluid properties. Therefore, to precisely predict dynamic performance of a torque converter, the effect of operating conditions must be considered through experimental coefficients such as friction loss coefficient and shock loss coefficient. And these coefficients cannot be achieved without experiments or internal flow analysis. In this study, the effects of varying material properties of operating fluid according to various operating temperatures are clarified with flow analysis of a torque converter. And these results are verified by comparing with those of performance experiment.

• 한국정밀공학회지
• /
• 제34권4호
• /
• pp.281-285
• /
• 2017

Since the performance of the spring operating mechanism for a circuit breaker mainly depends on the dynamic behavior and mass of the coil spring, its dynamic analysis is required to evaluate the performance of the spring operating mechanism. In this study, a coil spring design program is developed for the spring operating mechanism. An experimental approach is used to find the variables satisfying the design constraints' requirements. The coil spring is formed by using a lumped mass spring model. This program offers reference data for the design of coil springs and for the spring operating mechanism.

• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.136-142
• /
• 2003

The morphological analysis of wear debris can provide early a failure diagnosis in lubricated moving system. It can be effective to analyze operating conditions of oil-lubricated tribological system with shape characteristics of wear debris in a lubricant. But, in order to predict and recognize an operating condition of lubricated machine, it is needed to analyze and to identify shape characteristics of wear debris. Therefore, If the morphological characteristics of wear debris are recognized by computer image analysis using the neural network algorithm, it is possible to recognize operating condition of hydraulic driving members. In this study, wear debris in the lubricating oil are extracted by membrane filter (0.45 ${\mu}{\textrm}{m}$), and the quantitative values of shape parameters of wear debris are calculated by the digital image processing. This shape parameters are studied and identified by the artificial neural network algorithm. The result of study could be applied to prediction and to recognition of the operating condition of hydraulic driving members in lubricated machine systems.

• 대한안전경영과학회지
• /
• 제19권3호
• /
• pp.27-33
• /
• 2017

Electrical product safety certification is for public safety. Korea electrical safety certification (KC) is being tested and certified on the base of Korean electrical appliance safety act and KC scheme. There are operating system and Electrical safety standards in the KC scheme. KC' operating system was adapted from japan operating system of Japan certification scheme. But KC certification' electrical safety standard was adapted from IEC standards of IECEE CB scheme. So There are many problems such as difference of version between KC standards and IEC standards, discrepancy between operating system and standards. Therefore, This paper analyzed the reason of discrepancy and proposed the improved KC certification operating system in order to reduce cost and to save time in the procedure of issuing KC approval for public safety in using electrical products and also for global competence.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2033-2038
• /
• 2008

The CPLs(capillary pumped loops) are two phase heat transfer devices which enable active control of operating temperature of heat absorbing elements(or evaporators). Although the CPLs gain increasing interests as promising heat transfer devices for future missions such as spacecraft and commercial applications, their intrinsic complexity in operating principles makes the widespread use of these devices difficult. The key element and main cause of this complexity in operating principles is the two phase hydrodynamic accumulator or reservoir which controls the saturation state of the remaining loop and, particularly for the CPLs, it is separated from the evaporator. Thus, in this study, the operating characteristics of the CPL is investigated experimentally and theoretically. Mainly focusing on the role of reservoir the thermodynamic operating principle is examined first and the experimentally obtained steady state and transient state operating characteristics are discussed in detail.

• 산업경영시스템학회지
• /
• 제34권4호
• /
• pp.162-168
• /
• 2011

The most generalized form of the triadic operating policy for a controllable M/G/I queueing model is analyzed to obtain fundamental relations among the other forms of operating policies based on its corresponding expected busy period. Since it consists of three decision variables N, T and D, it could be possible to decompose into the simple, the dyadic and other forms of the triadic operating policies. The procedures to decompose the most generalized triadic policy into other forms of operating policies could provide a general methodology to identify each element associated with it.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.608-611
• /
• 2003

A large part of the embedded system, compared with the PC, have low performance CPU and small memory. So the embedded operating system fits the condition of that hardware system. A Single Address Space (SAS) OS has the operating system and all applications in the single address space. The SAS architecture enhances sharing and co-operation, because addresses have a unique interpretation. Thus, pointer-based date structures can be directly communicated and shared between programs at any time, and can be stored directly on storage. The key point of the SAS OS on the embedded system is the low overhead inter-action between programs in process and usage. So SAS OS can be ported on the low performance CPU. In this paper, we design the SAS OS (named emNOS, Embedded Network Operating System) on the ARMTTDMI processor. Finally we show the benefits of the SAS OS on the embedded system.

• Advances in Energy Research
• /
• 제4권3호
• /
• pp.239-253
• /
• 2016

Air quality in hospitals has always concerned hospitals' health officials due to its dangerous particles and gases. Because of the importance of air conditioning in the operating room, a system must be embedded in operating rooms to direct the contaminated air outside, and inject fresh filtered air from outside back into the room. In this study, laminar flow air conditioning system is implemented in the operating room by slot linear diffusers and with the help of air curtain. For this, stimulation Computational Fluid Dynamic (CFD) was used due to its efficiency. The aim of the present study was to find a proper solution to overcome the unfavorable factors, namely, contamination, humidity, and also temperature, velocity and pressure inside the room. These factors were implemented with different values and then stimulated through FLUENT software program. Results showed that the aforementioned factors can be overcome using air curtain and slot linear diffusers.

• 경영과정보연구
• /
• 제33권3호
• /
• pp.167-187
• /
• 2014

과거 우리나라 기업회계기준(K-GAAP)에서 영업이익 산정과 그 구성항목에 구체적인 기준을 두고 이를 엄격히 지켜왔던 것과 달리 한국채택국제회계기준(K-IFRS)에서는 영업이익에 대해 구체적으로 정의하지 않고 있다. 이로 인해 기업들은 각각 다른 방법으로 영업이익을 공시하게 되었고 투자자들은 영업이익이 자본시장에 전달하는 정보의 중요성을 고려할 때 K-IFRS의 영업이익 공시기준이 시장에 혼란을 초래할 수 있다는 우려를 표하였다. 한국회계기준원은 자본시장참여자들의 이러한 지적을 수용하여 2012년 9월 K-GAAP과 동일한 방법으로 영업이익을 산출 공시하도록 하였다. 본 연구는 우리나라 코스닥시장에 상장되어 있는 기업을 대상으로 K-IFRS에 의해 작성된 영업이익과 K-GAAP을 적용하여 작성된 영업이익의 가치관련성 분석을 통해 영업이익 공시정책 변경의 타당성을 검증하였다. K-IFRS를 적용한 코스닥기업 520개를 대상으로 K-IFRS 도입 이전(2010년)과 이후(2011년)의 영업이익의 가치관련성을 분석한 결과 K-IFRS 이전 기간의 영업이익이 더 높은 가치관련성을 가지는 것으로 조사되었다. 또한, 2011년에 공시된 영업이익(발표영업이익)은 과거의 회계기준으로 환산하여 추정한 영업이익(조정영업이익)에 비해 주가에 대한 설명력이 유의하게 낮은 것으로 분석되었다. 그러나 전체 표본을 발표영업이익과 조정영업이익의 상대적 크기로 나누어 동일한 분석을 수행한 결과 발표영업이익이 조정영업이익에 비해 높은 집단에 대해서만 영업이익의 가치관련성이 낮은 것으로 조사되었다. 추가적으로 조정영업이익이 음(-)인 기업 그리고 과거 연속적인 영업손실을 보고한 기업일수록 K-IFRS를 적용하여 조정영업이익에 비해 높은 수준의 발표영업이익을 공시한 것으로 나타나 2011년 손익계산서의 작성 과정에 경영자가 의도적으로 개입하였음을 암시하고 있다. 따라서, K-IFRS의 영업이익 공시에 대한 자본시장의 우려가 실증적으로도 지지되고 있으며, 한국회계기준원의 영업이익 공시정책변경의 타당성을 지지하는 것이다. 또한, 이러한 분석결과는 2011년 영업이익의 공시를 악용하여 코스닥시장의 퇴출위험에서 벗어난 부실기업들에 대한 사후적 조치가 필요함을 시사하고 있다.