• 대한수학회논문집
• /
• 제11권2호
• /
• pp.335-348
• /
• 1996

For an open set G in the complex plane C, we prove the existence of an entire function f such that its integer translations forms a finitely normal family exactly on G if and only if G is periodic with period 1 and G has no hole.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.380-380
• /
• 2010

Currently, organic light-emitting diodes (OLEDs) have been proven of their readiness for commercialization in terms of lifetime and efficiency. In accordance with emerging new technologies, enhancement of light efficiency and extension of application fields are required. Particularly inverted structures, in which electron injection occurs at bottom and hole injection on top, show crucial advantages due to their easy integration with Si-based driving circuits for active matrix OLED as well as large open area for brighter illumination. In order to get better performance and process reliability, usually a proper buffer layer for carrier injection is needed. In inverted top emission OLED, the buffer layer should protect underlying organic materials against destructive particles during the electrode deposition, in addition to increasing their efficiency by reducing carrier injection barrier. For hole injection layers, there are several requirements for the buffer layer, such as high transparency, high work function, and reasonable electrical conductivity. As a buffer material, a few kinds of transition metal oxides for inverted OLED applications have been successfully utilized aiming at efficient hole injection properties. Among them, we chose 2 nm of $WO_3$ between NPB [N,N'-bis(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] and Au (or Al) films. The interfacial energy-level alignment and chemical reaction as a function of film coverage have been measured by using in-situ ultraviolet and X-ray photoelectron spectroscopy. It turned out that the $WO_3$ interlayer substantially reduces the hole injection barrier irrespective of the kind of electrode metals. It also avoids direct chemical interaction between NPB and metal atoms. This observation clearly validates the use of $WO_3$ interlayer as hole injection for inverted OLED applications.

• 한국산학기술학회논문지
• /
• 제20권5호
• /
• pp.20-26
• /
• 2019

강이나 하천 폭 전체에 걸쳐 수리구조물을 설치하는 경우에는 대개 하상보호공을 설치한다. 하지만 하상보호공직하류부에 있는 하천하상이 상류부의 흐름영향으로 인해서 유실되는 국부세굴현상이 발생한다. 이와 같은 국부세굴은 흐름방향 경계지점의 흐름 및 난류특성과 하상토의 재질 등에 지배적이며, 시간의 경과에 따라서 점차적으로 위험할 수 있다. 따라서 본 연구에서는 이동상 모형실험을 통해 분석된 시간변화에 따른 하상보호공 하류부 국부세굴공 내부의 난류성분을 3차원 수치해석모형인 OpenFOAM의 적용결과와 비교하고 국부세굴공발달의 주요인자라고 알려져 있는 수심 적분된 상대난류강도 값의 흐름방향별 분포를 분석하였다. 또한 이 결과와 함께 하상전단응력 및 Shields parameter와 비교하여 세굴공의 안정화에 대하여 분석하였으며 추가적으로 초기 난류유입조건을 변화시켜 그 결과를 비교하였다. 그 결과 세굴공의 최대발생깊이는 유속의 크기보다는 오히려 수심 적분된 상대난류강도의 크기에 따라 지배적으로 발달하는 것을 확인하였다. 이와 같은 결과를 통해서 향후 하상보호공 하류부에서 발생 가능한 국부세굴공을 저감하거나 방지하기 위해서는 수심 적분된 상대난류강도를 조절할 수 있는 설계나 시공 혹은 수문조절이 필요할 것으로 사료된다.

• 한국항공우주학회지
• /
• 제46권6호
• /
• pp.471-478
• /
• 2018

본 연구에서는 복합재 날개 구조물에 손상허용설계를 적용하고 이를 입증하기 위한 정하중 시험을 수행하였다. 복합재 날개 구조의 정적강도를 입증하기 위하여 5 조건의 설계 제한하중 시험과 3 조건의 설계 극한하중 시험을 수행하였다. 그 다음으로 손상허용 설계를 입증하기 위하여 관련 규정에 따라서 복합재 주익 주요 취약부위에 BVID 10개, Open hole 11개를 생성 후, 설계 극한하중 시험과 파단시험을 실시하였다. 날개 주요 부위의 변위 및 변형률 시험 결과는 구조해석 결과와 비교적 잘 일치하였으며, 파단시험의 최초 파단부위도 최소안전여유를 갖는 부위에서 발생하여 구조해석 모델 및 강도평가 결과가 실제 구조의 정적 거동과 유사함을 확인하였다.

• 한국생산제조학회지
• /
• 제24권4호
• /
• pp.434-440
• /
• 2015

A smart phone is a multimedia device that is a necessity for modern people. It includes a wireless networking system to share information and pictures. However, numerous smart phones are discarded every year, since they have a very fast technology development cycle. This paper presents the development of a telemetry algorithm to measure displacement and strain with a discarded smart phone and digital image correlation methods. To implement the measurement algorithm, the LabVIEW 2010 program development platform was used. In order to verify reliability, an open hole tension test was conducted using a smart phone and a universal test machine. In addition, the measurement results from the smart phone were compared with FEM analysis results.

• Advances in Traditional Medicine
• /
• 제6권3호
• /
• pp.202-207
• /
• 2006

The crude methanol extract of the roots of Achyranthes aspera Linn. was investigated for its possible antinociceptive, diuretic and neuropharmacological activities in animal models. At the dose of 250 and 500 mg/kg body weight, the extract showed a significant antinociceptive effect in acetic acid induced-writhing in mice comparable to that produced by diclofenac sodium, used as standard drug. The crude extract produced significant diuretic effect at the dose of 500 mg/kg of body weight comparable to that produced by furosemide, used as standard drug. The extract also potentiated significantly the pentobarbital induced sleeping time in mice; decreased the open field score in open field test, decreased the number of hole crossed from one chamber in the hole cross test and decreased the head dip responses. The obtained results provide a support for the use of this plant in traditional medicine and its further investigation.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1606-1615
• /
• 2001

The present study has been conducted to investigate heat/mass transfer characteristics on a target plate fur arrays of circular impingement jets with and without effusion holes. A naphthalene sublimation method is employed to determine local heat/mass transfer coefficients on the target plate. The effusion holes are located at the center of four injection holes in the injection plate where the spent air is discharged through the effusion hole after impingement on the target plate. For the array jet impingement without effusion holes, the array jets are injected into the crossflow formed by upstream spent air because the impinged jets must flow to the open exit. For small gap distances, heat/mass transfer coefficients without effusion holes are very non-uniform due to crossflow effects and re-entrainments of spent air. However, uniform distributions and enhanced values of heat/mass transfer coefficients are obtained by installing the effusion holes. For large gap distances, the crossflow has little influence on heat/mass transfer characteristics on the target palate due to the large cross-sectional open area between the injection and target plates. Therefore, the distributions and levels of heat/mass transfer coefficients are almost the same for both cases.

• 산업기술연구
• /
• 제30권A호
• /
• pp.17-23
• /
• 2010

Recently, a large number of open-pit mines are planning to change their mining method to underground types because the environmental concerns and legal regulations are increased with a rise in the standard of living. The K silica mine, which is one of them and located in Kyunggi province, is planning the establishment of a vertical shaft which will be used for ore-pass channel in their new glory hole mining method. This vertical shaft will be designed to join with a horizontal gangway excavated from the ground level. In this new mining system, the excavated ore particles will be stored inside a shaft and transported out with a help of a conveyor belt. Therefore the hang-up of ore particles in a shaft, the control of gate at the bottom of a shaft, the installation of dog-leg at the gate should be investigated identically. In this study, the PFC-2D code which is one of the discrete element numerical methods has been applied to simulate the particle flow mechanism in a shaft, and the optimum mine design has been proposed to maximize the productivity and to minimize the system damage.

• Natural Product Sciences
• /
• 제15권3호
• /
• pp.115-120
• /
• 2009

Woohwangcheongsimwon (WHCSW) is a traditional oriental medicinal fomula which has been clinically used for treating strokes, palpitation, loss of consciousness and anxiety. The purpose of this study was to characterize the putative anxiolytic properties of WHCSW using an elevated plus-maze (EPM) and hole-board test. Control mice were orally treated with an equal volume of vehicle (10% Tween 80 solution), and positive control mice were treated with diazepam (1 mg/kg, i.p.). In the EPM test, WHCSW significantly increased the percentage of time-spent in the open arms (200 mg/kg, P < 0.05) and the percentage of open arm entries (200 and 400 mg/kg, P < 0.05). WHCSW also significantly increased the number of head-dips in the hole-board test (200 mg/kg, P < 0.05). In addition, the anxiolytic properties of WHCSW examined in the EPM test were inhibited by flumazenil (10 mg/kg, i.p.), a GABA$_A$ antagonist. However, no changes in spontaneous locomotor activity or myorelaxant effects were observed versus 10% Tween 80 controls. These results suggested that WHCSW is an effective anxiolytic agent, and that its anxiolytic effects are mediated via GABA$_A$ receptors.

• Macromolecular Research
• /
• 제17권7호
• /
• pp.528-532
• /
• 2009

The size and shape of free volume (FV) holes available in membrane materials control the rate of gas diffusion and its permeability. Based on this principle, a segmented, thermo-sensitive polyurethane (TSPU) membrane with functional gate, i.e., the ability to sense and respond to external thermo-stimuli, was synthesized. This smart membrane exhibited close-open characteristics to the size of the FV hole and water vapor permeation and thus can be used as smart food packaging materials. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), positron annihilation lifetimes (PAL) and water vapor permeability (WVP) were used to evaluate how the morphological structure of TSPU and the temperature influence the FV holes size. In DSC and DMA studies, TSPU with a crystalline transition reversible phase showed an obvious phase-separated structure and a phase transition temperature at $53^{\circ}C$ (defined as the switch temperature and used as a functional gate). Moreover, the switch temperature ($T_s$) and the thermal-sensitivity of TSPU remained available after two or three thermal cyclic processes. The PAL study indicated that the FV hole size of TSPU is closely related to the $T_s$. When the temperature varied cyclically from $T_s-10{\circ}C$ to $T_s+10^{\circ}C$, the average radius (R) of the FV holes of the TSPU membrane also shifted cyclically from 0.23 to 0.467 nm, exhibiting an "open-close" feature. As a result, the WVP of the TSPU membrane also shifted cyclically from 4.30 to $8.58\;kg/m^2{\cdot}d$, which produced an "increase-decrease" response to the thermo-stimuli. This phase transition accompanying significant changes in the FV hole size and WVP can be used to develop "smart materials" with functional gates and controllable water vapor permeation, which support the possible applications of TSPU for food packaging.