• 제목/요약/키워드: open-hole

검색결과 192건 처리시간 0.027초

저온건조($-55^{\circ}C$) 및 고온다습 조건($108.3^{\circ}C$)의 기계적 체결 홀이 탄소섬유강화 복합재의 강도 특성에 미치는 영향 연구 (Effect of Filled Hole on Strength Behavior of CFRP Composites at Cold Temperature Dry and Elevated Temperature Wet)

  • 김효진
    • Composites Research
    • /
    • 제22권3호
    • /
    • pp.82-88
    • /
    • 2009
  • 본 연구에서는 노치 홀과 기계적 체결 홀이 탄소섬유강화 복합재의 강도특성에 미치는 영향에 대하여 연구를 수행하였다. 강도는 상온건조, 저온건조($-55^{\circ}C$)와 고온다습 조건($108.3^{\circ}C$)에서 측정하였으며, 실험결과를 바탕으로 다음과 같은 결론을 얻었다. 기계적 체결 홀에서 인장강도의 증가는 볼트에 의해서 가해진 구속으로 홀 주위의 손상을 억제함으로써, 강도를 증가시킨 것으로 분석된다. 저온($-55^{\circ}C$)에서 인장강도의 증가는 섬유와 모재의 열팽창계수 거동의 특성에 따른 취성 증가의 요인이며, 고온다습 조건($108.3^{\circ}C$)에서 압축강도 감소는 침투만 수분에 의해 섬유와 모재의 층간 결합부의 물성이 저하한 것으로 사료된다.

패시브환기외피의 통기 및 열성능에 관한 실험적 연구 (An Experimental Study on Ventilation and Thermal Performance of Passive Ventilation Building Envelopes)

  • 윤성환;이태철;강정식
    • 설비공학논문집
    • /
    • 제23권11호
    • /
    • pp.711-717
    • /
    • 2011
  • In this study, 5 types of PVS(Passive ventilation system) units are made and experimented its ventilation performance, thermal performance according to open rate and hole diameter of perforated aluminum plane. Results are as follows. 1) The ventilation performance increases approximately 50~70% according by the open rate of PVS increasing. Also, the ventilation performance increases about 2%~12% according by the hole diameter of PVS increasing. 2) In winter temperature/pressure condition(in : $20^{\circ}C$, out : $-2^{\circ}C/{\Delta}P$ : 0.2~5.0Pa) the temperature of inflow air decreases according by the open rate of PVS increasing. Heat gain performance decreases 10.1%, 25.6% when open rate increases 3) In the same condition, Heat gain performance decreases 18.3%, 18.8% according by the hole diameter of PVS increasing.

원공이 있는 복합재 적층판의 압축강도 예측 (Compressive Strength Prediction of Composite Laminates Containing Circular Holes)

  • 김성준;박세훈
    • 한국항공우주학회지
    • /
    • 제49권7호
    • /
    • pp.549-555
    • /
    • 2021
  • 원공이 있는 복합재 적층판의 강도는 복합재 항공기기 설계 시 충격하중이 가해지는 부위의 설계 허용치로 사용된다. 일반적으로 BVID (Barely Visible Impact Damage)에 의한 강도저하는 24.0 mm 폭의 시편에 6.0 mm 지름의 원공이 있는 시편의 강도로 가정한다. 본 연구에서는 원공이 있는 복합재 적층판의 강도에 적층각이 미치는 영향을 조사하기 위해 잔류강도 시험을 수행하였다. 원공이 있는 적층판의 강도를 예측하기 위해 특성길이를 이용한 점응력 파손기준을 사용하였고, 이론해를 검증하기 위하여 유한요소해석을 수행하였다. 실험결과로부터 특성길이는 0°, ±45°와 90°층의 비율과 관련이 있음을 보였다. 또한 회귀분석을 통하여 임의의 적층 패턴에 대한 특성길이와 원공이 없는 시편의 강도를 결정하였다.

Black Hole along with Other Attacks in MANETs: A Survey

  • Tseng, Fan-Hsun;Chiang, Hua-Pei;Chao, Han-Chieh
    • Journal of Information Processing Systems
    • /
    • 제14권1호
    • /
    • pp.56-78
    • /
    • 2018
  • Security issue in mobile ad hoc network (MANET) is a promising research. In 2011, we had accomplished a survey of black hole attacks in MANETs. However network technology is changing with each passing day, a vast number of novel schemes and papers have been proposed and published in recent years. In this paper, we survey the literature on malicious attacks in MANETs published during past 5 years, especially the black hole attack. Black hole attacks are classified into non-cooperative and collaborative black hole attacks. Except black hole attacks, other attacks in MANET are also studied, e.g., wormhole and flooding attacks. In addition, we conceive the open issues and future trends of black hole detection and prevention in MANETs based on the survey results of this paper. We summarize these detection schemes with three systematic comparison tables of non-cooperative black hole, collaborative black hole and other attacks, respectively, for a comprehensive survey of attacks in MANETs.

Central nervous system depressant activity of Leucas aspera root

  • Rahman Shafiur;Sarder Mokaddez;Ali Yusuf;Rashid Abdur
    • Advances in Traditional Medicine
    • /
    • 제6권3호
    • /
    • pp.174-178
    • /
    • 2006
  • The ethanolic extract of Leucas aspera root was studied for its effect on the central nervous system (CNS) using pentobarbitone induced sleeping time test, the open field test and the hole cross test in Swiss albino mice. The present investigation revealed that the extract at the doses of 250 and 500 mg/kg, significantly prolonged the pentobarbitone induced sleeping time in mice though the onset of sleep was delayed as compared to control. In open field test the depressing effect was prominent from the second observation period (30 min) and persisted throughout the entire experimental period (240 min). In the hole cross test, the depressing effect was observed significant from the third observation period (60 min) and persisted up to the seventh observation period (240 min) except at fourth observation (90 min) for 250 mg dose group and depressing effect was significant from second observation (30 min) up to seventh observation period (240 min) for 500 mg dose group. These results support the finding that Leucas aspera root may contain biologically active constituent(s) having CNS activity.

Central nervous system depressant activity of Diospyros peregrina bark

  • Shilpi, Jamil Ahmad;Uddin, Shaikh Jamal;Rouf, Razina;Billah, Md. Morsaline
    • Advances in Traditional Medicine
    • /
    • 제4권4호
    • /
    • pp.249-252
    • /
    • 2004
  • The methanol extract of Diospyros peregrina bark was studied for its effect on the central nervous system (CNS) using the pentobarbitone induced sleeping time test, the open field test and the hole cross test in Swiss albino mice. The present investigation revealed that the extract, at the doses of 250 and 500 mg/kg, significantly prolonged the pentobarbitone induced sleeping time in mice though the onset of sleep was delayed as compared to the control. In open field test, the depressing effect was prominent from the second observation period (30 min) and persisted throughout the entire experimental period (240 min). In the hole cross test, the depressing effect was observed from the second observation period (30 min) and persisted up to fifth observation period (120 min) for 250 mg dose group and up to sixth observation period (180 min) for 500 mg dose group. These results support the finding that D. peregrina bark extract at the above doses has CNS depressing effects and indicate that D. peregrina bark may contain biologically active constituent(s) having CNS depressant activity.

최대 최소 주응력 관계를 활용한 Cutout Panel 구조물의 피로해석연구 (Study on Fatigue Analysis for the Cutout Panel Structure using the Relation of Max-Min Principal Stress)

  • 신인수;박규철;문정원;홍승현
    • 항공우주시스템공학회지
    • /
    • 제9권4호
    • /
    • pp.31-36
    • /
    • 2015
  • The fatigue analysis for cutout panel used for the weight reduction of aircraft has been conventionally performed through the open hole concept using the reference stress and stress concentration factor (Kt). However, in the actual structure cases, the goal of weight reduction might be less meaningful due to the conservative approach induced by the difficulties of extracting the confident reference stress from FE-Analysis in the complicated loading behavior. Therefore a new approach is proposed in order to secure the effectiveness of weight reduction and validate the confidence of the analysis results using the interaction of max-min principal stress at the critical location of open hole edge line.

Effect of laser shock peening and cold expansion on fatigue performance of open hole samples

  • Rubio-Gonzalez, Carlos;Gomez-Rosas, G.;Ruiz, R.;Nait, M.;Amrouche, A.
    • Structural Engineering and Mechanics
    • /
    • 제53권5호
    • /
    • pp.867-880
    • /
    • 2015
  • Mechanical fastening is still one of the main methods used for joining components. Different techniques have been applied to reduce the effect of stress concentration of notches like fastener holes. In this work we evaluate the feasibility of combining laser shock peening (LSP) and cold expansion to improve fatigue crack initiation and propagation of open hole specimens made of 6061-T6 aluminum alloy. LSP is a new and competitive technique for strengthening metals, and like cold expansion, induces a compressive residual stress field that improves fatigue, wear and corrosion resistance. For LSP treatment, a Q-switched Nd:YAG laser with infrared radiation was used. Residual stress distribution as a function of depth was determined by the contour method. Compact tension specimens with a hole at the notch tip were subjected to LSP process and cold expansion and then tested under cyclic loading with R=0.1 generating fatigue cracks on the hole surface. Fatigue crack initiation and growth is analyzed and associated with the residual stress distribution generated by both treatments. It is observed that both methods are complementary; cold expansion increases fatigue crack initiation life, while LSP reduces fatigue crack growth rate.

GRAPHS WITH ONE HOLE AND COMPETITION NUMBER ONE

  • KIM SUH-RYUNG
    • 대한수학회지
    • /
    • 제42권6호
    • /
    • pp.1251-1264
    • /
    • 2005
  • Let D be an acyclic digraph. The competition graph of D has the same set of vertices as D and an edge between vertices u and v if and only if there is a vertex x in D such that (u, x) and (v, x) are arcs of D. The competition number of a graph G, denoted by k(G), is the smallest number k such that G together with k isolated vertices is the competition graph of an acyclic digraph. It is known to be difficult to compute the competition number of a graph in general. Even characterizing the graphs with competition number one looks hard. In this paper, we continue the work done by Cho and Kim[3] to characterize the graphs with one hole and competition number one. We give a sufficient condition for a graph with one hole to have competition number one. This generates a huge class of graphs with one hole and competition number one. Then we completely characterize the graphs with one hole and competition number one that do not have a vertex adjacent to all the vertices of the hole. Also we show that deleting pendant vertices from a connected graph does not change the competition number of the original graph as long as the resulting graph is not trivial, and this allows us to construct infinitely many graph having the same competition number. Finally we pose an interesting open problem.

마이크로스피커 그릴의 구멍크기에 따른 음향임피던스 특성연구 (Studying the Acoustic Impedance as a Function of Hole Area of Grille for Micro-Speaker)

  • 오세진
    • 한국음향학회지
    • /
    • 제25권3호
    • /
    • pp.101-106
    • /
    • 2006
  • 본 연구에서는 그릴에 뚫려 있는 구멍이 마이크로스피커의 전체 임피던스에 미치는 영향에 대하여 조사하였다 이들에 대한 영향을 이론적으로 접근하기 위하여 그릴의 구멍을 열린 짧은 길이를 갖는 파이프시스템의 일종인 올피스로 취급하였다. 이에 대한 결과는 실험적으로 얻어진 특성과 매우 잘 일치하였다. 다시 말하면, 이들의 구멍크기가 작아지게 되면 구멍에 의한 음향임피던스가 매우 커지게 된다. 그 결과로써, 마이크로스피커의 전체 음향임피던스에 미치는 영향이 커지는 것을 알 수 있었다. 이처럼 그릴의 구멍크기가 작을수록 전체 임피던스에 미치는 영향이 커져서 마이크로 스피커 유닛에서 발생한 음향특성이 그릴의 사용으로 인하여 달라질 수 있게 된다.