• 대한기계학회논문집A
• /
• 제38권1호
• /
• pp.71-78
• /
• 2014

대형냉장고의 도어 힌지는 냉장고 도어의 개폐 동작을 원활하게 하고, 도어의 하중과 도어개폐로 인한 충격을 견디는 구조 안전성이 요구된다. 하지만, 도어 힌지는 복잡한 힌지 메커니즘과 민감한 구조 안전성으로 인해 설계 시 어려움이 많다. 본 논문에서는 스프링 응답 특성, 공간제약, 구조강도 성능을 만족하는 메커니즘을 설계하고, 메커니즘을 둘러싼 외부 프레임의 부피를 최소화하여 힌지의 생산 단가를 절감하고자 한다. 이를 위해 PIDO(progress integration and design optimization) 기술을 이용하여 모든 설계절차를 자동화함으로써 설계의 효율성을 높이는 성과를 거두었으며, 최적화 결과 목표로 하는 힌지 메커니즘 성능과 구조안정성을 개선하면서 힌지 프레임 질량의 24%를 절감하였다.

• Mycobiology
• /
• 제34권4호
• /
• pp.219-229
• /
• 2006

Seventeen microbial species including 10 fungal taxa, two yeasts and five bacteria, were isolated from freshly prepared orange, guava and banana juices kept in open bottles at room temperature for 7 days. Eight different essential oils, from local herbs, were tested for their antimicrobial activity against these test organisms. The essential oils of Cymbopogon citratus, Ocimum basilicum and Origanum majorana were found to be highly effective against these microorganisms. Aspergillus niger, A. flavus and Saccharomyces cerevisiae, the most prevalent microorganisms in juice, showed the highest resistance against these essential oils. GC-MS analysis showed that while e-citral, a'-myrcene, and z-citral represent the major components (75.1 %) of the essential oil of Cymbopogon citratus; bezynen,l-methyl-4-(2-propenyl), 1,8-cineole and trans-a'-bisabolene were the main components (90.6%) of Ocimum basilicum; whereas 3-cyclohexen-l-0l,4-methyl-l(l-methylethyl)-(CAS), c-terpinene and trans-caryophyllene represent the major components (65.1%) of Origanum majorana. These three essential oils were introduced into juices by two techniques namely, fumigation and direct contact. The former technique showed more fungicidal effect than the latter one against A. flavus, A. niger, and S. cerevisiae. The essential oil of Cymbopogon citratus by comparison to other test oils showed the strongest effect against these fungi with a minimum inhibitory concentration of $1.5\;{\mu}l/ml$ medium and a sublethal concentration of $1.0\;{\mu}l/ml$. The antimicrobial activity of this oil is thermostable at $121^{\circ}C$ for 30 min.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.67-67
• /
• 2018

The 5xxx series aluminum alloys are recently used in not only marine system but also automotive area because of a low density material, good mechanical properties and better resistance to corrosion. However, Aluminum alloys are less resistant than the purest aluminum such as 1xxx aluminum alloy. Electrochemical anodization technique has attracted in the area of surface treatment because of a simple procedure, a low-cost efficiency than other techniques such as lithography and a large volume of productivity, and so on. Here, The relationship between the corrosion behavior and the thickness of aluminum anodic oxide have been studied. Prior to anodization, The 5052 aluminum sheets ($30{\times}20{\times}1mm$) were degreased by ultra-sonication in acetone and ethanol for 10 minutes and eletropolished in a mixture of perchloric acid and ethanol (1:4, volume ratio) under an applied potential of 20V for 60 seconds to obtain a regular surface. During anodization process, Aluminum alloy was used as a working electrode and a platinum was used as a counter electrode. The two electrodes were separated at a distance of 5cm. The applied voltage of anodization is conducted at 40V in a 0.3M oxalic acid solution at $0^{\circ}C$ with appropriate magnetic stirring. The surface morphology and the thickness of AAO films was observed with a Scanning Electron Microscopy (SEM). The corrosion behavior of all samples was evaluated by an open-circuit potential and potentio-dynamic polarization test in 3.5wt% NaCl solution. Thus, The corrosion resistance of 5052 aluminum alloy is improved by the formation of an anodized oxide film as function of increase anodization time which artificially develops on the metal surface. The detailed electrochemical behavior of aluminum 5052 alloy will be discussed in view of the surface structures modified by anodization conditions such as applied voltages, concentration of electrolyte, and temperature of electrolyte.

• 원예과학기술지
• /
• 제29권2호
• /
• pp.135-143
• /
• 2011

In the Doritaenopsis hybrid, like most of the orchid species and hybrids, temperature is crucial for the vegetative-to-reproductive transition, and low temperature is required for bud differentiation. To understand the molecular mechanism of this process, an orchid GIGANTEA (GI) gene, DhGI1, was isolated and characterized by using the rapid amplification of cDNA ends (RACE) PCR technique. Sequence analysis showed that the full-length cDNA is 4,022 bp with a major open reading frame of 3,483 bp, and the amino acid sequence showed high similarity to GI proteins in Zea mays, Oryza sativa, Arabidopsis thaliana and other plants. Semi-quantitative RT-PCR revealed that DhGI1 was expressed throughout development and could be detected in roots, stems, leaves, peduncles and flower buds. The expression level of DhGI1 was higher when the plants were flowering at low temperature (22/$18^{\circ}C$ day/night) than the other growth stages. Further analysis indicated that the accumulation of DhGI1 transcripts was significantly increased at low temperature, and concomitantly, initiation of the peduncle was observed. However, DhGI1 levels were low under high temperature (30/$25^{\circ}C$) conditions, and flower initiation was inhibited. These results indicate that the expression of DhGI1 is regulated by low temperature and that DhGI1 may play an important role in inflorescence initiation in this Doritaenopsis hybrid at low temperatures.

• Archives of Reconstructive Microsurgery
• /
• 제17권2호
• /
• pp.82-86
• /
• 2008

Purpose: Soft tissue defect can occur on the posterior aspect of the elbow after trauma or fracture fixation. To cover the defect and maintain elbow functions, various flap surgeries including latissimus dorsi muscle flap, lateral arm flap and radial forearm flap can be performed. We present the clinical results of transposition lateral arm flap for coverage of the elbow defect and discuss the cause of posterior soft tissue necrosis after fracture fixation. Materials and Methods: Two patients who had posterior soft tissue defect of the elbow after open reduction of the fractures around the elbow were treated with transposition lateral arm flap. The mean size of skin defect was 20 $cm^2$. The flap was elevated with posterior radial collateral artery pedicle and transposed to the defect area. Donor defect was covered with split thickness skin graft. The elbow was immobilized for 1 week in extended position and active range of motion was permitted. Results: All two cases of transposition lateral arm flap survived without marginal necrosis. The average range of motion of the elbow was 10~115 degrees. Mayo elbow performance score was 72 and Korean DASH score was 23. Conclusion: When elbow fractures are fixed with three simultaneous plates and screws, skin necrosis can occur on the posterior aspect of the elbow around olecranon area. If the size of skin defect is relatively small, transposition lateral arm flap is very useful option for orthopaedic surgeons without microsurgical technique.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권6호
• /
• pp.25-34
• /
• 2017

현재 국내에서 준공 후 30년 이상 된 시설물은 현재 10.5% 수준에서 10년 후 23.9%로 급증할 전망이며, 국가 주요 시설물의 공용연수 증가에 따라 신설보다는 기존 시설물의 안전 확보와 수명을 연장하고 효율적인 유지관리체계 구축을 위해 새로운 평가체계가 필요하다. 본 연구에서는 기존 터널의 여러 구조 형식 중 가장 많이 시공된 NATM 터널에 대하여 체계적인 새로운 평가체계를 마련하고자 하며, 이를 위해 델파이 기법과 AHP 기법을 활용하였다. 기존 평가체계 및 평가항목 검토결과 도출가능한 평가항목이 한정적인 것으로 판단되어 기존에 적용되고 있는 항목에 대한 폐쇄적인 설문과 새로운 항목 도출을 위한 개방형 설문을 병행하여 설문조사를 실시하였다. 조사한 설문결과를 내용타당도 검증을 거쳐 NATM 터널에 적합한 평가인자를 도출하였으며, AHP기법을 활용하여 도출된 평가항목에 대한 가중치를 산정한 후 구조물의 특성에 맞는 평가체계를 새롭게 제시하여, 향후 세부지침 수정 및 보완 시 참고자료로 활용될 수 있도록 하고자 한다.

• 한국수산과학회지
• /
• 제48권3호
• /
• pp.346-353
• /
• 2015

Glucocorticoids (GCs) are steroid hormones regulated through responses to stress to maintain diverse metabolic and homeostatic functions. GCs act on the glucocorticoid receptor (GR), a member of the nuclear receptor family. This study identified and characterized the GR gene from the big-belly seahorse Hippocampus abdominalis designating it HaGR. The open reading frame of the HaGR cDNA was 2,346 bp in length, encoding a 782-amino-acid polypeptide with a theoretical isoelectric point of 6.26 and predicted molecular mass of 86.8 kDa. Nuclear receptors share a common structural organization, comprising an N-terminal transactivation domain, DNA-binding domain, and C-terminal ligand-binding domain. The tissue-specific mRNA expression profile of HaGR was analyzed in healthy seahorses using a qPCR technique. HaGR mRNA was expressed ubiquitously in all of the tissues examined, with the highest expression levels in kidney, intestine, stomach, and gill tissues. The mRNA expression in response to immune challenge with lipopolysaccharide (LPS), polyinosinic:polycytidylic acid (poly I:C), Edwardsiella tarda, and Streptococcus iniae revealed that it is inducible in response to pathogen infection. These results suggest that HaGR is involved in the immune response of the big-belly seahorse.

• 한국통신학회논문지
• /
• 제40권7호
• /
• pp.1276-1285
• /
• 2015

최근 들어, 자기 간섭 제어 기술의 발달로 인하여 PHY 계층에서는 full-duplex 통신이 가능한 수준에 도달하였다. 이러한 full-duplex 통신을 지원하기 위한 다양한 MAC 계층의 기술들이 활발히 연구 중이다. 본 논문에서는 무선랜 (WLAN) 시스템에서 full-duplex 통신의 특징과 이로 인하여 발생하는 문제점들을 알아보고, 이 문제를 해결하기 위하여 제안된 다양한 MAC 프로토콜을 살펴본다. 그리고 현재 초기 단계에 있는 무선랜 시스템에서의 full-duplex 통신과 관련된 MAC 계층의 향후 연구 과제를 논의한다.

• 한국통신학회논문지
• /
• 제40권4호
• /
• pp.709-719
• /
• 2015

본 논문은 자바 언어로 작성된 코드에 선언된 임의의 변수에 관하여, 해당 변수가 사용되는 행위를 기반으로 적절한 이름을 붙여주는 리네이밍 서비스와 이러한 분석 기술에 대응하는 보안 서비스를 소개한다. 소개하는 리네이밍 서비스는 API 기반과 반복문 내부 조건문 기반의 2가지 방법으로 구분된다. 본문에서 제안 기법의 알고리즘과 함께 알려진 자바 난독화 기술과 도구를 다루어 독자의 이해를 돕고, 프로토타입을 구현하여 실용성을 보였다. 프로토타입을 이용한 실험 결과 73%의 변수명 리네이밍 성공률을 보였다. 제안 기법을 활용하면, 공동 작업자가 직관적으로 코드 전체를 파악할 수 있도록 도울 수 있다. 또한, 악성코드 분석가가 변수명을 통하여 행위를 예측할 수 있어 분석에 도움을 줄 수도 있다. 하지만, 자바로 개발한 어플리케이션의 소스코드에 제안 기법을 적용하면, 해커에게 쉽게 노출될 수 있다. 따라서 자바 어플리케이션의 코드를 보호하는 방법도 소개한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.596-602
• /
• 2002

An easy elevator for learning originated is opened to compare the existed learning equipment, and it had a high studying efficient that the sequence control circuit can opens and closes with the wire. The structure of equipment to be controlled from the first floor to the fifth floors is demonstrated a constructive apparatus by a lamp atc to express the function of the open-close of the door according to the cage moving with a mechanical actuation of the forward-reverse breaker and the motor of load and a mechanical actuation of hand-operation control components of push-button S/W and L/S and relay etc. These components let connects each other in order to control of the elevator function with the auto program and the designed sequence control circuit. Consequent1y the process of these functions of 1~5steps could operates the cage with an auto program of the elevator and the sequence control circuit. The sequence control circuit is controlled by the step of forward and reverse to follow as that the sensor function of the L/S1~L/S5 let posit with the control switchs of S/W1~S/W5 of PLC testing panel and switchs of S/W1~S/W5 installed on the transparent acryl plate of the frame. In here, improved apparatus is a hand-auto operation combined learning equipment to study the principle and a technique of the originated sequence control circuit and the auto program of PLC.