• 대한한방부인과학회지
• /
• 제23권1호
• /
• pp.30-41
• /
• 2010

Purpose: This study was to observe the effect of "herbal decoction for sitz bath" on dermoepidermal recovery to wound tissue in rat's skin. Methods: The samples were assigned to 3 groups: control group : without any treatment, positive control group : potarose 10% solution, experiment group : herbal decoction for sitz bath. We made the open wound of $2{\times}2cm^2$ size that cut deep into the dermis. Treating the open wound for 17 days, we observed the size of the wound diminishing. On 17th days, the cell viability was measured by MTT assay. The effect anti-inflammatory and dermoepidermal recovery were examined by H&E staining, immunohystochemical staining for MIP-2, FGF. Results: The experiment group showed more recovery from the open wound comparing the control group and the positive control group on 10th days after wounding. But there was not remarkable difference between the experiment and positive control group after 17th days post-wounding. The number of MIP-2 positive reacted cell were significantly decreased and that of FGF positive reacted cell were significantly increased than positive control group at 17th days. Conclusion: According to these results, we finally concluded that "herbal decoction for sitz bath" could be effective in recovery to wound tissue.

• 한국의류학회지
• /
• 제31권11호
• /
• pp.1510-1519
• /
• 2007

This comparative study analyzes and compares tight skirt sewing methods which are found in the clothing configuration reference text books available in contemporary universities and which are used in commercially-available domestic consumer products. The study samples included 15 text books and 12 tight skirt consumer products of different brands on sale at three department stores in Seoul each of which had a belt, a back-centered zipper, and back double slits. The findings of the study are summarized as follows: First, text books mainly show very basic sewing methods of using zippers on both sides of the straight-lined waist belt. This indicates that it is necessary for such methods to be complemented so that they cover a recent variety of designs, materials, and sewing machines. For consumer products, the main sewing method is to use a curved waist belt and a console zipper in silhouette running across half the hipbone. Second, consumer products employ three different types of cutting and sewing methods for putting an inseam on the center of the back slit part: to leave the whole inseam hemmed in the back center, to cut the left side of the inseam to the upper part of the back slit, and to cut the inseam to both the upper parts of the back slit. However, a method shown in most of the sampled text books is to cut the inseam of the back center to both the upper parts of the back slit. Third, the way of finishing a bottom edge hem in the text books is to do slip-stitch, herringbone stitch, and slinting hemming, in order after doing over-lock stitch, or to cut the hem on the bias and then slip-stitch, while for the consumer products the most frequently used sewing method is to finish the bottom edge hem by doing secoui-stitch. Finally, while in the text books the method of stitching darts and tucks is used for lining, the main lining method used in consumer products is to make tucks only. Also in the way of stitching the side seams of lining or the seams of the back center, there is a difference between the two sample groups of text books and the consumer products: while the former suggests using both open seams and over-lock stitch, the latter is found to finish the seams using an over-lock stitch only.

• ETRI Journal
• /
• 제35권3호
• /
• pp.538-541
• /
• 2013

A compact microstrip lowpass filter (LPF) with an elliptic function response is proposed. A high equivalent capacitance and inductance between the structures of the resonator result in the sharp transition band of 0.04 GHz from 4 GHz to 4.04 GHz with an attenuation level of -3 dB and -20 dB, respectively. To improve the LPF rejection band, multiple open stubs are connected to the proposed resonator. A filter with a 3-dB cut-off frequency at 4 GHz is designed, fabricated, and measured, and agreement between the measured and simulated results is achieved. The results show that a stopband bandwidth of 131% with a suppression level better than -20 dB is obtained while achieving a compact size with a wide stopband.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.88-91
• /
• 2000

An MMIC oscillator operating at the 24.55 GHz has been designed using 0.2 ${\mu}{\textrm}{m}$AlGaAs/InGaAs/GaAs Pseudomorphic HEMT technology. The active device used in the oscillator design has a 0.2 ${\mu}{\textrm}{m}$ gate length PHEMT with 4$\times$80 ${\mu}{\textrm}{m}$ gate width. We obtained 4.08 dB of S$_{21}$ gain and 317 mS/mm of transconductance, and extrapolated unit current gain cut-off frequency (f$_{T}$) and maximum oscillation frequency (fmax) were 62 GHz and 120 GHz, respectively. The circuit are based on a series feedback and negative resistance topology. Microstrip line open stub is used to terminating. The oscillator circuits has designed for delivering maximum power to load and conjugated matching. The simulated small signal negative resistance was 50 Ω. We obtained 1.002 of loop gain and 0.0005$^{\circ}$angle from the simulation by HP libra 6.1. The layout for oscillator is 1.2$\times$1.8 $\textrm{mm}^2$.>.

• 전력전자학회논문지
• /
• 제22권1호
• /
• pp.1-8
• /
• 2017

The optimal gain design method of a three-phase boost converter is proposed in this study. The control system has a two-loop configuration, in which each controller is coupled closely; thus, the optimal design is difficult to achieve using conventional gain-tuning method. The proposed method is adopted to the MATLAB SISO TOOL software and is based on the controller requirements, which are phase margin and cut-off frequency of the open-loop system. The optimal proportional -integral gains can be designed easily using the proposed interactive method of the SISO TOOL. The performance of the proposed system is verified through simulation and experiments.

• 아동학회지
• /
• 제17권1호
• /
• pp.227-243
• /
• 1996

The purpose of this study was to investigate the prevalence of EBD (Emotional and Behaviour Difficulties) and to examine relationships of EBD to family and classroom psychosocial functioning. Two studies were carried out. The subjects were 840 children aged 7 to 12 for the first study and 448 children aged 12 for the second study. CBQ for children's behaviour, FACES III for family functioning and a short version of CES for classroom functioning were used. The prevalence of EBD was 9.4% by parents, 10.6% by teachers and 2.1% by both on the basis of Korean cut-off points. It was 13.7%, 20.8% and 4.3%, respectively, based on England points. More children were identified as EBD in boys, in one-child families and in lower academic group. EBD tended to be higher with lower levels of psychosocial functioning but classroom-control. The relationships were more consistent and high with children's rather than adults' perception, and with teachers' rather than mothers' ratings. The findings were discussed in terms of the scale validity, the concept of 'open systems' and differences in the validity of ratings.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.217-223
• /
• 1999

Mostly, water leakage took place in construction joints. In case of cable tunnels constructed by open-cut method, waterstops have been used to prevent the water leakage. But, we haven't any experience to install the waterstops in NATM cable tunnels. So, it is necessary to develope the waterstops and test the performance of it in laboratory. We manufactured cable tunnel lining quarter scale model by pouring concrete, and installed the waterstops. After filling the inside of concrete lining about two-third with water, we put the air pressure on the water, In addition, it is also carried out water leakage test for concrete lining model without waterstops. As a result, we confirmed the performance of waterstops and its adaptability. It is also tested that the performance of rubber gaskets used in concrete segments of Shield tunnelling. In addition, we determined the allowable infiltration rate for cable tunnel with non-drainage system.

• 한국소음진동공학회논문집
• /
• 제14권1호
• /
• pp.40-49
• /
• 2004

In this paper, vibration response of aerial gas pipeline due to vehicle loads was quantitatively estimated through experiment and analysis in open cut construction site. The vehicle vibration of various construction machines causes serious effect to the aerial gas pipeline. The new vibration prediction equations presented in this study can estimate the vibration velocity response of the aerial gas pipeline. In the nitration prediction equations, the vehicle′s weight and traveling velocity, which are the sources of vibration, are combined into the term called, "scaled weight" Methods to reduce vibration were proposed in case the vibration velocity response of the gas pipeline exceeded the vibration criterion, using the vibration prediction equations presented in this study. One was to limit the vehicle′s traveling velocity and the other to install the isolation equipment. Both methods can be estimated quantitatively.

• 한국산학기술학회논문지
• /
• 제7권3호
• /
• pp.414-419
• /
• 2006

본 연구에서는 Mohr-Coulomb 선형 모델 및 Duncan-Chang 비선형 모델을 사용하여 개착하부 통신구 터널에 대한 수치해석을 수행하였다. 해석결과, Mohr-Coulomb 모델이 Duncan-Chang 모델보다 큰 변위(통신구 터널에서 $10{\sim}14%$, 주변 지반에서 32%)를 산출하였다. 이는 터널부 토피의 영향으로 지반변위해석은 반드시 두 모델 결과의 종합평가가 필요하다. 지반응력은 Mohr-Coulomb 모델이 Duncan-Chang 모델보다 $5{\sim}10%$ 큰 값을 산출하였다.

• Journal of Chest Surgery
• /
• 제16권1호
• /
• pp.34-39
• /
• 1983

The syndrome of anomalous muscle bundle dividing the right ventricle into two pressure chambers has been described by many authors. The malformation should not be confused with tetralogy of Fallot itself because the obstructive hypertrophic bands are usually proximal to the right ventricular infundibulum. One case [11 years old male] of double chambered right ventricle due to aberrant muscle bundle with intact ventricular septum is presented. The pressure gradient was 68 mmHg between inflow and outflow tracts of right ventricle on cardiac catheterization. On opening the right ventricle, there noted stenosis of outflow tract by infundibular membrane, hypertrophied anomalous muscle bundle, thickened moderator band & hypertrophied anterior papillary muscle. Open heart surgery was carried out with the aid of extracorporeal support, Anomalous muscle bundle [1.0 cm x 4.0 cm] and infundibular membrane were resected safely. The hypertrophied moderator band was cut at mid-portion and anterior papillary muscle was split vertically. The postoperative course was uneventful and discharged in good condition 2 weeks later.