DOI QR코드

DOI QR Code

Optimal Gain Design Method of the 3 Phase Boost Converter

3상 부스트 컨버터의 제어기 최적 이득 설계 기법

  • Park, Hae-Chan (Dept. of Electrical Eng. Korea Nat'l Univ. of Transportation) ;
  • Kim, Il-Song (Dept. of Electrical Eng. Korea Nat'l Univ. of Transportation)
  • Received : 2016.09.29
  • Accepted : 2016.11.11
  • Published : 2017.02.20

Abstract

The optimal gain design method of a three-phase boost converter is proposed in this study. The control system has a two-loop configuration, in which each controller is coupled closely; thus, the optimal design is difficult to achieve using conventional gain-tuning method. The proposed method is adopted to the MATLAB SISO TOOL software and is based on the controller requirements, which are phase margin and cut-off frequency of the open-loop system. The optimal proportional -integral gains can be designed easily using the proposed interactive method of the SISO TOOL. The performance of the proposed system is verified through simulation and experiments.

Keywords

References

  1. J. S. Kim, "Design of filter and controller for UPS inverter", Ph.D. Thesis, Chungbuk National University, 2001.
  2. S. C. Kim, H. C. Kim, J. H. Choi, and G. B. Chung, "CRA based robust controller design for PWM converter," The Transactions of the Korean Institute of Power Electronics, Vol. 12, No. 2, pp. 183-190, Apr. 2007.
  3. H. C. Park and I. S. Kim, "Bi-directional buck-boost converter controller design method for ESS using matlab SISO TOOL," The Transactions of the Korean Institute of Power Electronics, Vol. 21, No. 6, pp. 457-464, Dec. 2016. https://doi.org/10.6113/TKPE.2016.21.6.457
  4. J. W. Choi and S. K. Sul, "New current control concept-minimum time current control in the three-phase PWM converter," IEEE Transactions on Power Electronics, Vol. 12, issue. 1, pp. 124-131, Jan. 1997. https://doi.org/10.1109/63.554177
  5. Y. Bo, "High performance control of a three-phase PWM rectifier," For the Degree of Doctor of Philosophy Department of National University of Singapore, 2008.
  6. G. Esfandiari, H. Aran, and M. Ebrahimi, "Comprehensive design of a 100 kW/400 V high performance AC-DC converter," Power Engineering and Electrical Engineering, Vol. 13, No. 5, pp. 417-429, Dec. 2015.
  7. D. Boroyevich, "Modeling and control of three-phase PWM converters," The 2nd IEEE International Power and Energy Conference, 30 Nov. 2008.
  8. D. K. Ku, J. K. Ji, G. S. Cha, and J. H. Moon, "Design of robust voltage controller for single-phase UPS inverter," The Transactions of the Korean Institute of Power Electronics, Vol. 16, No. 4, pp. 317-325, Aug. 2011. https://doi.org/10.6113/TKPE.2011.16.4.317
  9. C. H. Kwak and G. H. Choe, "Design of single loop output voltage controller for 3 phase PWM inverterl," The Transactions of the Korean Institute of Power Electronics, Vol. 8, No. 6, pp. 561-568, Dec. 2003.