• 음성과학
• /
• 제13권3호
• /
• pp.49-65
• /
• 2006

Recently, several theories on the digital speech signal processing expanded the communication boundary between human beings and machines drastically. The aim of this study is to collect dialectal speech in Korea on a large scale and to establish a digital speech data base in order to provide the data base for further research on the Korean dialectal and the creation of value-added network. 528 informants across the country participated in this study. Acoustic characteristics of vowels and consonants are analyzed by Power spectrum and Spectrogram of CSL. Test words were made on the picture cards and letter cards which contained each vowel and each consonant in the initial position of words. Plot formants were depicted on a vowel chart and transitions of diphthongs were compared according to dialectal speech. Spectral times, VOT, VD, and TD were measured on a Spectrogram for stop consonants, and fricative frequency, intensity, and lateral formants (LF1, LF2, LF3) for fricative consonants. Nasal formants (NF1, NF2, NF3) were analyzed for different nasalities of nasal consonants. The acoustic characteristics of dialectal speech showed that young generation speakers did not show distinction between close-mid /e/ and open-mid$/\epsilon/$. The diphthongs /we/ and /wj/ showed simple vowels or diphthongs depending to dialect speech. The sibilant sound /s/ showed the aspiration preceded to fricative noise. Lateral /l/ realized variant /r/ in Kyungsang dialectal speech. The duration of nasal consonants in Chungchong dialectal speech were the longest among the dialects.

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.501-508
• /
• 2011

In order to control the tip vortex cavitation occurring around the tip of a rotating propeller blade, researches on the propeller cavitation and blade tip vortex flows have been increased. In this paper, the propeller tip vortex flow for a blunt and sharp tips was studied using an unsteady Reynolds-averaged Navier-Stokes equations solver based on a cell-centered finite volume method. In numerical open water test, torques, thrusts, pressure distributions and vortex flows were compared for various rotating speeds. To consider a hull wake, the nominal wake was specified in inlet boundary condition. Pressure distributions and vortex flows with the hull wake were investigated for various propeller rotating angles. From the results, it was confirmed that the blunt tip propeller delayed the tip vortex flow.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.383-387
• /
• 2009

Multi-crystalline silicon surface etching without grain-boundary delineation is a challenging task for the fabrication of high efficiency solar cell. The use of sodium hydroxide - sodium hypochlorite (NaOH40% + NaOCl 12%) solution for texturing multi-crystalline silicon wafer surface in solar cell fabrication line is reported in this article. in light current-voltage results, the cells etched in NaOH 40% + NaOCl 12% = 1:2 exhibited higher short circuit current and open circuit voltage than those of the cells etched in NaOH 40% + NaOCl 12% = 1:1 solution. we have obtained 15.19% conversion efficiency in large area(156cm2) multi-Si solar cells etched in NaOH 40% + NaOCl 12% = 1:1 solution.

• 한국세라믹학회지
• /
• 제28권8호
• /
• pp.626-634
• /
• 1991

The specimens for the corrosion test were made by hot-pressing of SiC power with 2 wt% Nl2O3 and 10wt% Al2O3 additions at 200$0^{\circ}C$ and 205$0^{\circ}C$. The specimens were corroded in 37 mole% NaCl and 63 mole% Na2SO4 salt mixture at 100$0^{\circ}C$ up to 60 min. SiO2 layer was formed on SiC and then this oxide layer was dissolved by Na2O ion in the salt mixture. The rate of corrosion of the specimen containing 10 wt% Al2O3 was slower than that of the specimen containing 2 wt% Al2O3. This is due to the presence of continuous grain boundary phase in the specimen containing 10 wt% Al2O3. The oxidation of SiC produced gas bubbles at the SiC-SiO2 interface. The rate of corrosion follows a linear rate law up to 50 min. and then was accelerated. This acceleration is due to the disruption oxide layer by the gas evolution at SiC-SiO2 interface. Pitting corrosion has found at open pores and grain boundaries.

• Journal of Electrical Engineering and Technology
• /
• 제5권2호
• /
• pp.209-219
• /
• 2010

In this paper, a novel dynamic available transfer capability (DATC) has been computed for real time applications using three different intelligent techniques viz. i) back propagation algorithm (BPA), ii) radial basis function (RBF), and iii) adaptive neuro fuzzy inference system (ANFIS) for the first time. The conventional method of DATC is tedious and time consuming. DATC is concerned with calculating the maximum increase in point to point transfer such that the transient response remains stable and viable. The ATC information is to be continuously updated in real time and made available to market participants through an internet based Open Access Same time Information System (OASIS). The independent system operator (ISO) evaluates the transaction in real time on the basis of DATC information. The dynamic contingency screening method [1] has been utilized and critical contingencies are selected for the computation of DATC using the energy function based potential energy boundary surface (PEBS) method. The PEBS based DATC has been utilized to generate patterns for the intelligent techniques. The three different intelligent methods are tested on New England 68-bus 16 machine and 39-bus 10 machine systems and results are compared with the conventional PEBS method.

• 한국해안해양공학회지
• /
• 제2권1호
• /
• pp.34-42
• /
• 1990

우리나라 서해안 새만금해역의 조석을 수량적분한 수치모형에 의해 조사하였다. 첫 단계로서 4개 주요분석(M$_2$, S$_2$, $K_1$, $O_1$)의 외해경계외력을 부여함으로써 독립적인 조석체계를 산정하였다. 수립된 모형은 이 해역에 방조제가 건설될 시 주요분조의 변화양상을 1차적으로 평가하는데 적용된 바 반일구조의 진폭은 방조제 전면에서 2-7cm확폭되나 일주조는 큰 변화가 없었다. 반면에 방조제에 의한 주류체계는 큰 변화를 제시하는데 방조제 전면부의 유속감소와 최대해저마찰응력의 변화를 볼 때 전면부의 토사이몰 가능성이 높은 것으로 추정된다.

• 한국해안해양공학회지
• /
• 제8권2호
• /
• pp.174-184
• /
• 1996

본 연구에서는 완전개방 직사각형 항만을 대상으로 항만 부진동 해석에 많이 사용되는 복합요소 수치모형의 실제 적용시에 관계되는 주요인자에 대한 민감도 해석을 수행하였다. 그 결과 유한요소 영역은 수심 변화가 크지 않은 곳까지 확장하는 것이 바람직한 것으로 나타났으며, 해석해 영역의 수심은 두 영역의 경계면을 따른 평균수심을 사용하는 것이 적절한 것으로 나타났다. 해석해의 Fourier 성분수는 일정수심의 단순한 항만에서는 큰 의미가 없으나 복잡한 형상의 변동수심의 항만에서는 그 중요성이 증가할 것으로 예상된다. 입사파향은 제1 공진 모드에는 큰 영향을 주지 않으나 수심 경사가 커질수록 그 영향이 증대되며, 특히 고차 모드는 큰 영향을 받게 되는 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제28권3호
• /
• pp.229-246
• /
• 1996

A mechanistic model has been developed to predict the release behavior of fission gas during steady-state irradiation of LWR UO$_2$ fuel. Under the assumption that UO$_2$ grain surface is composed of fourteen identical circular faces and grain edge bubble can be represented by a triangulated tube around the circumference of three circular grain faces, it introduces the concept of continuous formation of open grain edges tunnels that is proportional to grain edge swelling. In addition, it takes into account the interaction between the gas release from matrix to grain boundary and the reintroduction of gas atoms into the matrix by the irradiation-induced re-solution of grain face bubbles. It also treats analytically the behavior of intragranular, intergranular, and grain edge bubbles under the assumption that both intragranular and intergranular bubbles are uniform in both radius and number density. Comparison of the present model with experimental data shows that the model's prediction produces reasonable agreement for fuel with centerline temperatures of 1000 to 140$0^{\circ}C$, wide scatter band for fuel with centerline temperatures lower than 100$0^{\circ}C$, and underprediction for fuel with centerline temperatures higher than 140$0^{\circ}C$.

• Nuclear Engineering and Technology
• /
• 제50권3호
• /
• pp.327-339
• /
• 2018

This article presents a new global-local hybrid coarse-mesh finite difference (HCMFD) method for efficient parallel calculation of pin-by-pin heterogeneous core analysis. In the HCMFD method, the one-node coarse-mesh finite difference (CMFD) scheme is combined with a nodal expansion method (NEM)-based two-node CMFD method in a nonlinear way. In the global-local HCMFD algorithm, the global problem is a coarse-mesh eigenvalue problem, whereas the local problems are fixed source problems with boundary conditions of incoming partial current, and they can be solved in parallel. The global problem is formulated by one-node CMFD, in which two correction factors on an interface are introduced to preserve both the surface-average flux and the net current. Meanwhile, for accurate and efficient pin-wise core analysis, the local problem is solved by the conventional NEM-based two-node CMFD method. We investigated the numerical characteristics of the HCMFD method for a few benchmark problems and compared them with the conventional two-node NEM-based CMFD algorithm. In this study, the HCMFD algorithm was also parallelized with the OpenMP parallel interface, and its numerical performances were evaluated for several benchmarks.

• 상하수도학회지
• /
• 제25권1호
• /
• pp.41-49
• /
• 2011

The diffuser which is conventionally adapted to MBR, has problem that decreasing the cleaning effect of membrane module by inflexible air supply due to the occlusion of sludge from diffuser hole. To solve this problem, diffuser structure of submerged module should be improved to discharge sludge which is flow into the diffuser for prevent occlusion in the diffuser. In this study, the structure of the diffuser was reformed to open lower part for preclusion the blocking. And the outlet diameter of the diffuser was drawn through the condition for the depth of water and air rate, to prevent air-leak condition of improved diffuser. Moreover, application is evaluated by comparing test with occlusion effect of the conventional and improved diffuser. From the results, air-water boundary changes are steady with changes of water depth and it shows linear relation about air rate. By using this linear numerical formula, the height of diffuser's outlet can be decided. Also, it displays that it can prevent the occlusion effect during the comparing test. Hereafter, if this diffuser is applied to practical MBR process, the occlusion problem of diffuser will be disappeared.