• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.2
• /
• pp.101-114
• /
• 2012

The physico-chemical characteristics including water temperature, salinity, dissolved oxygen(DO), chemical oxygen demand (COD), chlorophyll-a(Chl. a), suspended particulate matter(SPM) and dissolved inorganic nutrients were investigated in the Garolim Bay, Yellow Sea, Korea in 2010 carried out six times per year at 11 fixed stations by Korea Fisheries Research & Development Institute. The water temperature, salinity, COD, dissolved inorganic nutrients, Chl. a and SPM showed significant difference between surface and bottom water but the other parameters didn't. There were not significant difference between stations. The water temperature showed typical change patterns of the temperate seawater. The annual average of salinity showed more than 31 so that there could not have occurred low saline water. The average of DO from June to August showed over than 3mg/L which showed higher than the below standard value of the hypoxic (oxygen-deficient) water. The average of Chl. a varied $1.68{\mu}g/L$ at surface, $2.38{\mu}g/L$ at bottom layer in June and $1.68{\mu}g/L$ at surface, $1.57{\mu}g/L$ at bottom layer at August. The dissolved inorganic nutrients showed high concentration in February and low concentration in August due to the limitation of the freshwater input in summer and phytoplankton used to the dissolved inorganic nutrients. The ratio of DIN/DIP showed 30.52 at surface and 37.89 at bottom layer in June which was higher than other month. The SPM was 44.15mg/L at bottom layer in February which was the highest value in this study due to the northwest monsoon. Because of the actively water change in the open sea without inflow of freshwater from land in Garolom Bay, there were not occurred low saline water and hypoxic water. thus, this Bay showed good water quality and required to be conserved continuously as important costal area for fisheries.

• Conservation Science in Museum
• /
• v.19
• /
• pp.1-18
• /
• 2018

The Stele for National Preceptor Hongbeop from the Jeongtosa Temple site in Chungju is one of the most important stone cultural heritage items for exemplifying the style of the Goryeo era. Despite its obvious value, this relic has been stored in a weathered condition at the National Museum of Korea. It had suffered various dismantling and displacements during the Japanese colonial period and had long been exposed in the open air. The stele was selected as a subject for the Stone Monuments Restoration Project launched by the National Museum of Korea in 2015. In preparation for its outdoor exhibition as part of the restoration project, this study investigated the characteristics of its materials, produced a map of its deterioration from weathering, and carried out ultrasonic analysis of the materials to provide findings useful for conservation treatment. The materials analysis revealed that the turtle-shaped pedestal of the stele was made from two-mica granite consisting of medium-grained quartz, plagioclase, alkali feldspar, biotite, and muscovite. Its body stone is crystalline marble, the rock-forming mineral in which is medium-grained calcite in a rose-pink color with dark grey spots. The dragon top of the stele is made of crystalline marble, the major component of which is medium-grained calcite of a light-grey color. The deterioration consists of 21.5% abrasion on the stone body, with its south face most damaged, and 18.6% granular disintegration, with the north face most damaged. The ultrasonic material characterization conducted for mapping the general condition of weathering shows low values on the parts-assembly area of the turtle-shaped pedestal and on the upper portion of the stone body. It is considered that there is dislocation due to partial blistering and fracturing as well as to the differences in surface treatment. Prior to the outdoor exhibition of the stele, the surface was cleaned of contaminants and was consolidated based on the scientific investigation in order to prevent weathering from the external environment.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.3
• /
• pp.16-37
• /
• 2015

As a result of analyzing the forming and the transformations of Seokjojeon Hall garden by linking it to the changes of Deoksugung Palace influenced by the social atmosphere, the Seokjojeon garden can be classified into four phases. The first phase starts from 1896 to 1914. Gyeongungung was built in the late 19th century(1896-1897) as an official palace and Junghwajeon Hall and Seokjojeon Hall was built for Gojong. J.M.Brown was in charge of the construction of Seokjojeon in the beginning but H.W.Davidson saw the end also set up the garden. In the process of forming the garden the incorporating of Dondeokjeon Hall and the demolishing of the west wing corridors of Junghwajeon Hall occurred. At this phase of the garden a statue of an eagle was put up in the garden but was soon taken down. The shape of the garden was quiet simple with a central axial pathway, a round assorted flower bed placed in front of Seokjojeon Hall. The second phase starts from 1915 to 1932 which lasted for 17 years. At the last years of the Great Han Empire the duties of Gungnaebu(宮內府) was transferred to Leewangjik(李王職) in 1911 and a research on the existing buildings was done by Jujeonkwa(主殿課) in 1915. According to the research drawings, the garden still maintained the axial pathway formed in the previous phase but the garden had an asymmetric form. The flower bed was formed in a round shape and an open-knot technique and boundary plantation was applied to the garden. The third phase starts from 1933 to 1937 and is the period when Seokjojeon Hall was made public. By the year of 1932 many buildings of Deoksugung Palace had been demolished in the preparation of the opening of Seokjojeon Hall as a permanent exhibition hall. The central axial pathway still remained in the new garden and added a pond with a turtle statue in the center. The fourth phase starts from 1938 until the liberation from Japan and is the period when Deoksugung Palace became a park. Yi Royal-Family Museum was built and linked to Seokjojeon Hall with a bridge and the garden transformed into a sunken garden. The garden adopted a fountain and a pagora. Despite the minor changes in the after years the garden still posses most of its form from the fourth phase. As we can see the current garden of Seokjojeon Hall is not the same as the initial garden and therefor the importance of this study lies in the fact that modifications to the statements regarding to Seokjojeon Hall garden should be made.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.3
• /
• pp.108-118
• /
• 2019

Appreciating gardens in garden show has its meaning in appreciating concepts and ideas of artists, hidden inside of garden, as formative arts, as well as the beauty of the nature. This study is aimed to understand the intension of artists in visual expression through formative media in the gardens by assessing structure of visual narrative in the space with 20 artworks among the ones presented in 2018 Taehwagang Garden Show. The formative structure is delivered as contents and forms through formative media and formative language. Thus, for analysis on the artworks, the researcher assessed expressive characteristics of the media, through visual and space language, that forms the formative structure in the contest of narrative structure expressed in the gardens and findings of the analysis are as follows. First, for intertextuality obtained through media image, most of the artworks delivered message through 'figure image.' This means, the concept is delivered as 'affinity of actual objects' through the media and associated 'meaning and meaning action' are expected. Second, the characteristics of signs to show symbolism in the gardens were categorized into 'icon'. 'index' and 'symbol'. The results showed that most of the artworks expressed common characteristics between image and meaning, using 'icon' and 'symbol'. Third, as space formation components, based on formative principles, the components of 'dominant' and 'subordinate' roles were defined as the key components for meaning delivery. Also, it was understood that 'space configuration with overlapped image' and 'space configuration with transparency' were adopted to strengthen conceptional layers. Forth, for space occupation types, there were mostly central hall type, corridor type and passage space type and for open space type, the entire space area was conceptualized, instead of certain object. The circulation line was defined in the frequency order of circular type, pass type and return type. The study on the expressive characteristics of visual narrative in garden design is meaningful as it could build base data for the method of spatial design for visual development of concepts in the future.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.2
• /
• pp.63-96
• /
• 2013

Recently, U.S. Department of Transportation (DOT) expanded the "Enhancing Airline Passenger Protections" on August 23, 2011 and October 24, 2011. The Rule regulates tarmac delays, denied boarding compensation, customer service plans, and fare advertising. The adopted rule is to protect passengers by improving passenger service requirements on U.S. national or domestic carriers and foreign air carriers as well. The major issues are as follows: First, regarding to so called Tarmac Delay, carriers must establish a Tarmac Delay Contingency Plan setting forth the number of hours the carrier will permit an aircraft to remain on the tarmac at U.S. airports before allowing passengers to deplane. Carriers also must provide passengers with food and water in the event the aircraft remains on the tarmac for two or more hours and must provide operable lavatories and medical attention while the aircraft remains on the tarmac, irrespective of the length of the delay. Carriers also must create and retain records regarding tarmac delays lasting more than three hours. Also they need to update passengers every 30 minutes during a tarmac delay of the status of the flight and the reason for the delay, allow passengers to deplane if the aircraft is at the gate or another disembarkation area with the door open. Second, carriers now must adopt a "Customer Service Plan" that addresses offering customers the lowest fares available, notifying customers about delays, cancellations, and diversions; timely delivery of baggage; accommodating passengers' needs during tarmac delays and in "bumping cases"; and ensuring quality customer service. Third, the new regulations also increase minimum denied boarding compensation limits to $650 / $1,300 or 200% / 400% of the fare, whichever is less. Last, the DOT also has modified its policies related to enforcement of Rules pertaining to full fare advertising. The Rule states that the advertised price for air transportation must be the entire price to be paid by the customer. Similarly, Korea revised the passenger protection clauses within Aviation Act. However, it seems to be required to include various more issues such as Tarmac Delay, oversales of air tickets, involuntary denied boarding passengers, advertisements, etc.

• Spatial Information Research
• /
• v.22 no.3
• /
• pp.23-24
• /
• 2014

NGII (National Geographic Information Institute) has been providing VRS (Virtual Reference Station) service so that could determine precise positioning in real time since 2007. However, since the VRS service has to maintain the connected status with VRS server, the number of users who can use VRS service are limited by capacity of VRS server. To solve this problem, NGII has been providing FKP (Virtual Reference Station) service using one way telecommunication from November 1, 2012. Therefore, it is predicted that the usage of FKP service will increase in public surveying and cadastral resurveying in the future. However, the studies with respect to analysis of FKP precision for applying to public surveying and cadastral resurveying is not conducted enough. In this study, to analyse the application possibility of FKP on the public surveying and cadastral resurveying, the two kind analysis were performed. First is the analysis of accuracy according to the configuration of reference station of FKP and VRS. One is consisted of same reference stations, another is consisted of different reference stations. Second is the accuracy anlalysis of horizontal and vertical positioning acquiring VRS and FKP data in various measurement environment based on VRS regulation. Result of first study, Positioning accuracy according to the configuration of the reference stations satisfies related regulation. However, accuracy of FKP in case of different reference stations is worse than in case of same reference stations.. The result of second test shows that the horizontal precision of FKP and VRS in good measurement environment satisfy the allowed precision. However, in some case, horizontal precision of FKP and VRS in poor measurement environment exceed the allowed precision. In addition, the number of exceeding the allowed precision in the FKP is more than the VRS. The vertical precision of the VRS satisfy related work provision. In conclusion, the result of this study shows that the FKP only in open area should be used for public survey and cadastral resurvey. Therefore the additional studies with respect to the improvement of FKP precision should be conducted.

• The Journal of Natural Sciences
• /
• v.14 no.1
• /
• pp.63-81
• /
• 2004

It is the purpose of this study to arrange in ornamental trees and shrubs the planting that leads to an appropriate type of templescape. The study was designed primarily as an examples for each Buddhist temple which desires further decoration with several ornamental plants, doubles the effectiveness of the Sen-Buddhist meditation, and boosts tourists' attraction. To investigate the planting status and type of trees and shrubs in the precincts of Buddhism temples, We close three temples : They are Nagsansa, Boolgoogsa and Booseugsa, which are intermonatane area temples all together. The results investigated were summarized as follows :1. Planting status and pattern in temples Open spaces of the Daewoogjeon in all temples, a main Sanctuaries in temple buildings, where Buddha is enshrined in, we could not find any kind of trees of shrubs to be planted.Muryangsujeon, a symbol of "Future", which can be also found at Boosugsa temple, is living in Western Elysium world and takes mercy on mankind of this life. Taxus cuspidata was planted at this Muryangsujeon, known as an immeasurable bliss building, where an Amitabha is enshrined in.Total 25 species of trees and shrubs were planted around Birozani building of Buddhist temples, Birozani is enshrined at the Birojion of Boollgoogsa temple.The buddhist Goddess of Mercy which is a buddhist saint for pursuit of fortune and blessing to relieve the mankind is enshrined at Wonchonjeon, Daebijeon and Kwaneumjeon which are able to observe at both Boolgoogsa and Nagsnsa temples, where Euonymus japonicus trees including other 26 species could be found in common at both temples.2. Correlation between trees/shrubs and temple buildingsTrees and flowers symbolizing Buddha are often planted as material sources of gardening to decorate : They are Logerstroemia indica as Buddha's flower, Viburmum opulus var. calvescens resembling Buddha's head, Tilia mandshurica producing the beads of rosary, Gardenia jaminoides Ellis with white flower blade and flower of bliss, not flower to this day and Lotus flowering clearly in the pond filling with dirty water which is able to clarifies the world full of crime, infidelity and injustification. Among these Buddhist' plants, however, Logerstroemia indica could be found in all three temples, and Viburmum opulus var. calvescens at both Nagsansa and Boosugsa. Also, Lager stroemia indica was planted at all three temples and Viburmum opulus var. calvescens at both temples of Nagsansa and Boosugsa. Tilia mandshurica and Gardenia jasminoides Ellis were not found in any temples which might become the subject of investigation.In relation of the buildings of each temples as a sanctified space, the planting of trees and shrubs was not considered for the arrangement, templescape architecture or species. And, also, we could not find in the study any special relationship of trees/ shrubs with the characteristics of temples.With the results obtained through precise studies we presented here in this paper newly designed model of templescape in intermane buddhist temple which can be applied for planting and arrangement of trees or/and shrubs. Basic principles of model in mind are:To consider the correlation of the dominant between plants and temple buildings.To plant trees/shrubs for special functions as well as conditions of temple location.To make tree arrangement correlating to Buddhism spirit.To induce environment friendly plants to be planted, suitable to regional conditions.This redecorated model of templescape might be used as a canon of the tree planting and arrangement in the precincts of Buddhism temples.

• Korean Journal of Ichthyology
• /
• v.18 no.3
• /
• pp.223-233
• /
• 2006

The annual and spatial changes in the species composition of catch off Yeosu were analyzed using the daily sales slip catch data by a set net in the inshore waters off Dolsan Islands in Yeosu from April to October 2001, off Yeon Islands of Yeosu from April to October 2002 and in the offshore waters off Dolsan Islands of Yeosu from April to December 2003, respectively. Scomberomorus niphonius, Seriola spp., Trichiurus lepturus, Engraulis japonicus, Sarda orientalis, Todarodes pacificus, Pampus echinogaster, Sardinella zunasi, Scomber japonicus, Lophius litulon and Loligo beka were dominant species in abundance, indicating that pelagic fish were mainly caught by a set net off Yeosu. S. zunasi, P. echinogaster, Platycephalus indicus and L. beka inhabited mainly in the inshore waters, and S. niphonius, Seriola spp., T. lepturus, P. echinogaster, T. pacificus, Takifugu porphyreus and Pagrus major resided mainly in the offshore waters as the pelagic resident species. E. japonicus was a representative dominant species moving between the inshore and the offshore waters seasonally. S. zunasi and E. japonicus occurred in the inshore waters, and E. japonicus, L. litulon and Seriola spp. begain to be caught in the deep offshore waters in spring. Total catch was high during the summer season by migration of the open sea species such as T. lepturus, S. niphonius, S. japonicus, Seriola spp., S. orientalis, P. echinogaster and T. pacificus. In fall, S. niphonius, E. japonicus, Sphyraena pinguis, Siganus fuscescens and Leiognathus nuchalis were dominant in the inshore waters, and S. niphonius, P. echinogaster, Hyporhamphus sajori, S. japonicus and T. lepturus continued to occur from summer in the offshore waters but total catch decreased, indicating the typical seasonal variation pattern of the temperate region. Most of catchable fishes by a set net were the pelagic species showing a significant temporal variation. Collection and analysis of daily catch data by large set nets can be used to determine seasonal variation in species composition of pelagic fish in a study area.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.85-97
• /
• 2010

This research studied the location and the spatial composition of Pihyang-jeong zone. Pihyang-jeong is regarded as one of the five great pavilions in Chollabuk-do. Located in Taein-myeon of Jeongeup-si, Pihyang-jeong is also called as 'the number one pavilion in Honam area'. 1. There is no record regarding the first construction of Pihyang-jeong. There is only transmitting by word of mouth that the scholar Choi Chi-won had an excursion to here and composed some poetry during the age of King Heon-gang of Shilla dynasty. However, there are records that Lee Ji-gweng had expanded the humble structure in 1618, Park Sung-go repaired it in 1664 and Yoo Geun repaired it again in 1715. 2. The location of Pihyang-jeong is 'high in north and low in south' and typical 'mountain in rear and water in front'. It has Seong-hwang Mountain(189m) in the north, Hang-ga Mountain(106m) in the south, Tae Mountain(33m) in the south and an open field in the northwest. 3. The spatial composition around Pihyang-jeong is as following. Pihyang-jeong faces 'Hayeonji'(the lower side lotus pond) in the south-south-west direction. 4. The buildings around Pihyang-jeong are; Pihyang-jeong, which was the pavilion of the government official not directly in charge of government office, Hambyeok-lu in the Hayeonji and the facility for the caretaker. Pihyang-jeong is a rectangular building with double eaves and hipped-and-gabled roof. It has five rooms in the front and four rooms in the side. Hambyeok-lu had been first built in 1918 as two-storey wooden pavilion with dancheong, traditional multicolored paintwork on wooden buildings. Then it was modified into rectangular single-storey pavilion with hipped-and-gabled roof and five rooms in 1971. In 2010, it was rebuilt as a hexagonal pavilion; therefore, the present shape is completely different one from the original shape. 5. The scenic features around Pihyang-jeong are as following. There are 21 stone monuments in Pihyang-jeong zone. The fence surrounding Pihyang-jeong is a traditional Korean style crude stone fence. There are three gates in three-gates-style, each gate made with two posts and one 'matbae'(gabled) roof. Also, a stepping stone for mounting/dismounting was found in the east of Pihyang-jeong outer perimeter. 6. The water scenic feature around Pihyang-jeong is a representative case of drawing in the water from the natural pond nearby government office and building a pavilion around the water. 7. The planting around Pihyang-jeong is as following. There are Zelkova trees in the boundary perimeter. In the southern small park, there are Zelkova trees, Crape-myrtie trees, Bushy young pine trees, Pine trees, Satuki, Purple azalea and Grass field. Around Hambyeok-lu in the Ha-yeonji, Elm trees, Zelkova trees and Pine trees are growing in good condition.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.