• Journal of information and communication convergence engineering
• /
• 제12권3호
• /
• pp.168-172
• /
• 2014

In this paper, we propose an algorithm that can efficiently detect and monitor multiple ships in real-time. The proposed algorithm uses morphological operations and edge information for detecting and tracking ships. We used smoothing filter with a $3{\times}3$ Gaussian window and luminance component instead of RGB components in the captured image. Additionally, we applied Sobel operator for edge detection and a threshold for binary images. Finally, object labeling with connectivity and morphological operation with open and erosion were used for ship detection. Compared with conventional methods, the proposed method is meant to be used mainly in coastal surveillance systems and monitoring systems of harbors. A system based on this method was tested for both stationary and non-stationary backgrounds, and the results of the detection and tracking rates were more than 97% on average. Thousands of image frames and 20 different video sequences in both online and offline modes were tested, and an overall detection rate of 97.6% was achieved.

• Journal of Microbiology and Biotechnology
• /
• 제14권5호
• /
• pp.991-995
• /
• 2004

Immobilized sensor spots were applied for online measurement of dissolved $O_2$, in test tubes. Oxygen transport was quantified at varied shaking frequency and filling volumes. The k$_{L}$ a increased with increasing shaking frequency and decreasing filling volume. In non-baffled tubes the maximum $k_{L}a$ value was $70h^{-1}$, equivalent to a maximum $O_2$ transfer capacity of 15mMh^{-1}$. Monitoring of the hydrodynamic profile revealed that the liquid bulk rotated inside the tube with an inclined liquid surface, whereby the angle between the surface and tube wall increased with increasing shaking frequency. The $k_{L}a$ clearly correlated to the surface area. Placement of four baffles into the tubes improved the oxygen transfer up to 3-fold. The highest increase in $k_{L}a$ was observed at high filling volume and high shaking frequency. The maximum $k_{L}a$ in baffled tubes was $100 h^{-1}$.

• 한국항행학회논문지
• /
• 제15권6호
• /
• pp.1126-1131
• /
• 2011

최근 교육의 패러다임이 학습자 중심으로 변화되면서 새로운 수업모델의 하나로 프로젝트 기반 수업에 대한 관심이 증대되고 있다. 대학에서는 이러한 변화를 수용하여 창의적으로 변화를 창출 할 수 있는 차세대 인재를 육성하는데 교육의 목표를 두고, 그에 따른 연구가 활발히 진행되고 있다. 본 연구에서는 대학에서 실시되는 설계 교과목의 주된 교과 내용인 프로젝트를 수행하는데 있어서, 최소화된 교수자의 개입과 주도적인 학습자 중심의 교수학습 모델을 제안하였다. 제안된 모델은 프로젝트 기반 수업의 지원체제, 팀 편성방법, 학습자의 다양한 상호작용 방법, 교수자의 팀워크 모니터링 방식 등을 제시하였으며, 이를 최근 사용이 급증하고 있는 스마트폰을 이용한 프로젝트관리 어플리케이션으로 설계 및 구현하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.38-43
• /
• 1994

To provide more instructive and a safer ground control operation environments for satellite operators, and subsequently to implement a better look-and-feel user interface and a structural mechanism to enhance the efficiency of control and monitoring facilities, we have developed a prototype(laboratory model) ground control softwares targeting for the first generation KOREASAT scheduled to be launched in 1995. As far as the functionality is concerned, the developed system is covering almost all the mission phase operational functions except for some functions like antenna tracking control that are necessary for real operation environments. Most of the functions of the system is realized in softwares but some hardwares needed for TM/TC RF communications are also included in it. The system is now being integrated and under the system test. The performance and functionality is to be evaluated by the end of this year by using the satellite software simulator. Next year, this system could be configured to be used as a workbench for a online/off-line analysis of the operating KOREASAT satellites.

• 한국간호교육학회지
• /
• 제24권2호
• /
• pp.137-148
• /
• 2018

Purpose: The purpose of this study was to explore the monitoring experience of nursing students and to suggest considerations when developing mentoring programs. Methods: This qualitative study was conducted by online surveys and individual interviews with 7 nursing students who participated in the health promotion program as mentors. Data were analyzed using qualitative content analysis to identify motives for participating in mentoring and to explore their changes through mentoring. Results: The results were as follows: Motives for participating were 'inquisitiveness about children', 'interest in mentoring activities' and 'curiosity about research'. Recognition of mentor roles were 'actively involved guide', 'exemplary role model' and 'empathetic emotional supporter'. Changes through mentoring experiences were revealed by 'understanding the characteristics of children', 'improvement of interaction ability with children', 'understanding self and changes' and 'recognition of excellence in forest activities'. Conclusion: Nursing students had opportunities to learn the characteristics of general children and to understand themselves through natural interaction. Participation in mentoring has the potential to be a creative educational method of field learning as a form of service learning.

• 컴퓨터교육학회논문지
• /
• 제10권2호
• /
• pp.89-100
• /
• 2007

대규모 집단을 대상으로 시행하는 서답형 문항을 수기 채점 방식으로 채점하는 경우 채점 과정에서 발생하는 채점 오차를 줄이기 위해서는 많은 노력과 시간을 필요로 한다. 이러한 문제점을 해결하기 위해 세계 각국에서는 서답형 문항 채점 시스템을 개발하여 운용하고 있지만, 국내에서는 채점 시스템의 기초적인 연구도 미흡한 실정이다. 본 연구의 목적은 '서답형 문항의 인터넷 기반 채점 시스템' 설계의 기반을 마련하는데 있다. 시스템 설계의 기반 마련을 위한 시스템의 개요와 기본 설계도, 채점자 배정 방법, 채점자 신뢰도 추정에 의한 채점자 오류 검색 알고리즘을 제안하였다. 본 시스템은 실시간으로 채점 신뢰도를 추정하여 채점 오차를 보정할 수 있는 장점이 있다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권5호
• /
• pp.206-212
• /
• 2005

In this paper, criterion and algorithm for on-line dissolved gas of a Power transformer are studied. For the initial diagnosis of a power transformer, the on-line dissolved gas analysis is one of the most important and acceptable item to preventively diagnose a power transformer. But the criterion and algorithm of this item are not established yet in korea. In this paper, criterion and alarm level of the on-line dissolved gas analysis are based on the analysis of on-line data of operating transformers, Korea industrial standard and operation manual for a power transformer as well as accumulated data of the preventive diagnosis systems which have been operated at nine substations of Korea Electric Power Co.(KEPCO) since 1997, Therefore, the criterion and alarm level proposed in this paper are to be well suitable and are adaptable for the domestic operational environments and conditions of the power transformer. Considering that the conventional diagnosis system is capable only of accumulating and monitoring data of the power transformer operation, the criteria and the algorithms make it possible to accomplish an ultimate goal of the preventive diagnosis system. It is expected, therefore, that they will have a beneficial effect on broad applications of the preventive diagnosis system and the achievement of manless substation system in the future.

• 한국임상약학회지
• /
• 제17권1호
• /
• pp.46-51
• /
• 2007

This study was aimed to provide the controlled terminology for adverse drug reactions by selecting an appropriate internationally standardized classifications (WHO-ART or MedDRA). We collected the relevant information on ADR terminology systems including WHO-ART and MedDRA by online searching and visiting pharmaceutical companies and WHO UMC (Uppsala Monitoring Centre, Uppsala, Sweden). For MedDRA, project leader directly communicated with the officer of MSSO (Maintenance and Support Services Organization). Collecting all the pertinent information, two possible terminology classifications or systems (WHO-ART and MedDRA) were compared in the views of acceptability, cost-effectiveness and international feasibility and reviewed by the consultation committee and finally WHO-ART was selected.

• Journal of Electrical Engineering and Technology
• /
• 제3권4호
• /
• pp.484-490
• /
• 2008

In this paper, an integrated fault section detection and isolation strategy is proposed based on the application of the Distribution Automation System(DAS) utilizing advanced IT and communication technologies. The Feeder Remote Terminal Unit(FRTU) has been widely used to collect data in the Korean distribution system. The achieved data is adopted in this method for detecting multiple fault types. Especially in the case of single phase-to-ground fault, the fault section is detected by comparison of the zero-sequence current phase angle. The test results have verified the effectiveness of the proposed method in a radial distribution system through extensive simulations in Matlab/Simulink. Furthermore, a communication-based demo system identical to the simulation model has been developed, and it can be applied as an online monitoring and control program for fault section detection and isolation.

• 대한기계학회논문집A
• /
• 제32권1호
• /
• pp.77-82
• /
• 2008

Strain-gauges have been dominantly used to measure strain at various points on a rotor, however, either a slip ring or telemetry has to be used to send sensor signals to data acquisition instruments at stationary side. Both slip ring and telemetry have numerous inherent problems which force severe limitations in real applications. This paper introduces a new rotor condition monitoring system using FBG(Fiber Bragg Grating) sensors and a rotary optical coupler. A single optical fiber with many FBG sensors is installed on the rotor and an optical dynamic interrogator is installed at stationary side. The sensor signal connection between rotating part and stationary part is made by the rotary optical coupling method which makes use of light's unique characteristic-light travels through space. Broad band light source from the interrogator travels to the optical fiber on the rotor and reflected FBG sensor signals travel back to the optical fiber on stationary side and are connected to the interrogator. Rotary optical coupler's insertion loss change due to rotation is compensated by using a reference sensor installed at the center of the rotor. The proposed system's performance has been successfully demonstrated by accurately measuring strains at 5 points on a blade rotating at high speed.