• The Journal of Advanced Prosthodontics
• /
• 제2권1호
• /
• pp.18-24
• /
• 2010

PURPOSE. The aim of this pilot study was to investigate the effect of etched microgrooves on the hydrophilicity of Ti and osteoblast responses. MATERIAL AND METHODS. Microgrooves were applied on Ti to have 15 and $60{\mu}m$ width, and 3.5 and $10{\mu}m$ depth by photolithography, respectively. Further acid etching was applied to create Ti surfaces with etched microgrooves. Both smooth- and acid-etched Ti were used as the controls. The hydrophilicity of Ti was analyzed by determining contact angles. Cell proliferation and osteogenic activity of MC3T3 mouse preosteoblasts were analyzed by bromodeoxyuridine assay and alkaline phosphatase (ALP) activity test, respectively. One-way ANOVA, Pearson's correlation analysis and multiple regression analysis were used for statistics. RESULTS. Etched microgrooves significantly increased the hydrophilicity of Ti compared to the smooth Ti. $60{\mu}m$-wide etched microgrooves significantly enhanced cell proliferation, whereas the osteogenic activity showed statistically non-significant differences between groups. Result of the osteogenic activity significantly correlated with those of hydrophilicity and cell proliferation. Hydrophilicity was determined to be an influential factor on osteogenic activity. CONCLUSION. This study indicates that increase in hydrophilicity of Ti caused by etched microgrooves acts as an influential factor on osteogenic activity. However, statistically non-significant increase in the ALP activity suggests further investigation.

• 한국운동역학회지
• /
• 제30권2호
• /
• pp.145-154
• /
• 2020

Objective: The purpose of this study was to determine the relationship between impact and shear peak force, and tibia-accelerometer variables during running. Method: Twenty-five male heel strike runners (mean age: 23.5±3.6 yrs, mean height: 176.3±3.3 m/s, mean mass: 71.8±9.7 kg) were recruited in this study. The peak impact and anteroposterior shear forces during treadmill running (Bertec, USA) were collected, and impact shock variables were computed by using a triaxial accelerometer (Noraxon, USA). One-way ANOVA was used to test the influence of the running speed on the parameters. Pearson's partial correlation was used to investigate the relationship between the peak impact and shear force, and accelerometer variables. Results: The running speed affected the peak impact and posterior shear force, time, slope, and peak vertical and resultant tibial acceleration, slope at heel contact. Significant correlations were noticed between the peak impact force and peak vertical and resultant tibia acceleration, and between peak impact average slope and peak vertical and resultant tibia acceleration average slope, and between posterior peak (FyP) and peak vertical tibia acceleration, and between posterior peak instantaneous slop and peak vertical tibial acceleration during running at 3 m/s. However, it was observed that correlations between peak impact average slope and peak vertical tibia acceleration average slope, between posterior peak time and peak vertical and resultant tibia acceleration time, between posterior peak instantaneous slope and peak vertical tibial acceleration instantaneous slope during running at 4 m/s. Conclusion: Careful analysis is required when investigating the linear relationship between the impact and shear force, and tibia accelerometer components during relatively fast running speed.

• The Journal of Advanced Prosthodontics
• /
• 제10권6호
• /
• pp.408-414
• /
• 2018

PURPOSE. This study aimed to assess the effect of non-thermal plasma on the shear bond strength of resin cements to polyetherketoneketone (PEKK) in comparison to other surface treatment methods. MATERIALS AND METHODS. Eighty PEKK discs were subjected to different surface treatments: (1) Untreated (UT); (2) Non-thermal plasma (NTP); (3) Sandblasting with $50{\mu}m$ $Al_2O_3$ particles (SB); and (4) Sandblasting + Non-thermal plasma (SB+NTP). After each surface treatment, the contact angle was measured. Surface conditioning with Visio.Link was applied in all groups after pre-treatment. RelyX Unicem resin cement was bonded onto the PEKK specimens. After fabrication of the specimens, half of each group (n=10) was initially tested, while the other half was subjected to thermocycling ($5^{\circ}C$ to $55^{\circ}C$ at 10,000 cycles). Shear bond strength (SBS) testing was performed using a universal testing machine, and failure modes were assessed using stereomicroscopy. The SBS results were analyzed statistically using one-way ANOVA followed by Tukey's post hoc test. Independent t-test was used to examine the effect of thermocycling (P<.05). RESULTS. The highest SBS values with or without thermocycling were observed with PEKK specimens that were treated with SB+NTP followed by the SB group. The lowest SBS results were observed in the UT groups. CONCLUSION. The shear bond strength between PEKK and resin cements was improved using non-thermal plasma treatment in combination with sandblasting.

• The Journal of Advanced Prosthodontics
• /
• 제12권6호
• /
• pp.338-343
• /
• 2020

PURPOSE. The present study aimed to investigate the relationships between the crown form of the upper central incisor and their labial inclination, overbite, and overjet. MATERIALS AND METHODS. Maxillary and mandibular casts of 169 healthy dentitions were subjected to 3D dental scanning, and analyzed using CAD software. The crown forms were divided into tapered, square, and ovoid based on the mesiodistal dimensions at 20% of the crown height to that at 40%. The degree of labial inclination of the upper central incisor was defined as the angle between the occlusal plane and the line connecting the incisal edge and tooth cervix. The incisal edges of the right upper and lower central incisor that in contact with lines parallel to the occlusal plane were used to determine the overbite and overjet. One-way ANOVA was performed to compare the labial inclination, overbite, and overjet among the crown forms. RESULTS. The crown forms were classified into three types; crown forms with a 20%/40% dimension ratio of 1.00±0.01 were defined as square, >1.01 as tapered, and <0.99 as ovoid. The labial inclination degree was the greatest in tapered and the least in square. Both overbite and overjet in tapered and ovoid were higher than those in square. CONCLUSION. Upper central incisor crown forms were related to their labial inclination, overbite, and overjet. It was suggested that the labial inclination, overbite, and overjet should be taken into consideration for the prosthetic treatment or restoring the front teeth crowns.

• Current Photovoltaic Research
• /
• 제10권4호
• /
• pp.95-100
• /
• 2022

Solar cell is a device that converts photon energy into electrical energy. Therefore, absorption of solar spectrum light is one of the most important characteristics to design the solar cell structures. Various methods have emerged to reduce optical losses, such as textured surfaces, back contact solar cells, anti-reflection layers. Here, the anti-reflection coating (ARC) layer is typically utilized whose refractive index value is between air (~1) and silicon (~4) such as SiN_x layer (~1.9). This research is to print a material called polydimethylsiloxane (PDMS) to form a double anti-reflection layer. Light with wavelength in the range of 0.3 to 1.2 micrometers does not share a wavelength with solar cells. It is confirmed that the refractive index of PDMS (~1.4) is an ARC layer which decreases the reflectance of light absorption region on typical p-type solar cells with SiN_x layer surface. Optimized PDMS printing with analyzing optical property for cell structure can be the effective way against outer effects by encapsulation.

• 한국안전학회지
• /
• 제38권2호
• /
• pp.87-95
• /
• 2023

On October 29, 2022, a very large number of people gathered in Itaewondong, Yongsan-gu, Seoul, Korea for a Halloween festival, and as crowds pushed through narrow alleys, 159 deaths and 195 injuries occurred, making it the largest crushing incident in Korea. There have been a number of stampede deaths where crowds gathered at large-scale festivals, event venues, and stadiums, both at home and abroad. When the density increases, the physical contact between bodies becomes very strong, and crowd turbulence occurs when the force of the crowd is suddenly added from one body to another; thus, the force is amplified and causes the crowd to behave like a mass of fluid. When crowd turbulence occurs, people cannot control themselves and are pushed into he crowd. To prevent a stampede accident, investigation and management of areas expected to be crowded and congested must be systematically conducted, and related ministries and local governments are planning to establish a crowd management system to prepare safety management measures to prevent accidents involving multiple crowds. In this study, based on national data, a continuous digital topographic map is modeled in 3D to analyze the risk of crowding and present a plan for selecting high-risk walking routes. Areas with a high risk of crowding are selected in advance based on various data (numerical data, floating population, and regional data) in a realistic and feasible way, and the analysis is based on the visible results from 3D modeling of the risk area. The study demonstrates that it is possible to prepare measures to prevent cluster accidents that can reflect the characteristics of the region.

• 여성건강간호학회지
• /
• 제29권1호
• /
• pp.44-54
• /
• 2023

Purpose: Uncertainty and restrictions on daily life have increased fear, stress, and depression during the coronavirus disease 2019 (COVID-19) pandemic. Depression is the most common mental health problem in pregnant women. The purpose of this study was to evaluate the levels of fear and stress related to COVID-19 experienced by pregnant women, as well as their levels of depression, and to examine the factors associated with depression during pregnancy. Methods: This was a cross-sectional, correlational study conducted among 153 pregnant women who visited a maternity hospital in Busan, South Korea. A self-reported questionnaire was used for data collection from December 18, 2021 to March 8, 2022. Data were analyzed using descriptive statistics, the independent t-test, one-way analysis of variance, Pearson correlation coefficients, and multiple regression. Results: Pregnant women experienced a moderate level of fear related to COVID-19, with an average score of 21.55±4.90. The average score for depression during pregnancy was 14.86±11.10, with 50.3% of the participants experiencing depression (≥13). The factors associated with depression during pregnancy were fear of COVID-19, contact with a confirmed case of COVID-19, being in the third trimester of pregnancy, high stress levels due to difficulties experienced from social distancing measures, and unintended pregnancy. These five statistically significant factors explained 35.0% of variance in depression during pregnancy. Conclusion: Considering the prevalence of depression in pregnant women during the COVID-19 pandemic, it is necessary to develop interventions to reduce anxiety by providing correct information and alleviating the stress of social distancing.

• 한국인터넷방송통신학회논문지
• /
• 제23권3호
• /
• pp.113-118
• /
• 2023

최근 건강을 위해 자전거 타는 사람들이 많아지고 자전거로 출퇴근하는 사람들이 늘어나면서 자전거 사용자가 많아졌다. 하지만, 사용자가 늘어나면서 사고가 많이 발생하고 있으며, 자전거 사고 대처가 불안정하다. 안전 장비를 제외하고는 다른 방법으로 사고를 대비하기엔 미비하다. 따라서 현대 성인들의 안전하고 편리하게 라이딩할 수 있는 방편이 필요하다. 본 연구에서는 다른 앱과는 달리 안전 기능을 추가하여 라이딩을 하면서 블랙박스 촬영을 할 수 있고, 사고다발구역임을 알려주는 기능이 구현된다. 또한, 안드로이드 내장 센서를 이용하여 사고를 감지하고 자동으로 비상 연락을 취할 수 있는 기능도 추가된다. 자전거 사용자들이 다양한 앱들을 추가로 이용할 필요 없이 하나의 앱에서 안전과 편리성을 확보할 수 있다. 게다가 라이딩 커뮤니티 게시판을 통해 라이딩에 대해 이야기를 나눌 수 있고, 자신의 이동경로를 공유할 수 있는 앱 시스템을 개발한다.

• 대한치과보철학회지
• /
• 제44권5호
• /
• pp.594-605
• /
• 2006

Statement of problem: Modification of titanium implant surface has potential to ensure clinically favorable performance that several surface modification technologies have been introduced. Among the methods. anodizing method and sol-gel hydroxyapatite coating method have gained much interest due to its roughness and chemical composition of the coating layer, but more of its biocompatibility result is required. Purpose : The purpose of this study was to compare bone-implant interface shear strength of four different surface treated implants as time elapsed. Resonance frequency analysis(RFA) and removal torque measurement methods were employed to measure implant stability at one week and six week after implantation. Material and method: A total of 80 screw-shaped implant [20 machined, 20 resorbable media blasted(RBM), 20 anodized, and 20 anodized+hydroxyapatite sol-gel coated] were prepared, and one of each group was implanted in the tibia of a New Zealand white rabbit that total 20 of them were used. In order to test the implant stability and implant-tissue interface contact changing in the bone bed, each 10 rabbit were sacrificed 1 week and 6 week later while resonance frequency and removal torque were measured. One-way analysis of variance and the Tukey test were used for statistical analysis. Results : The results were as follows. 1. There was no statistically significant difference of implant stability quotients(ISQ) value in RFA between individual groups after 1 week of implantation and 6 weeks(p>0.05). But, there was statistically significant increase of ISQ value in 6 weeks group compared to 1 week group(p<0.05). 2. There was no statistically significant difference in removal torque analysis between individual groups after 1 week of implantation and 6 weeks(p>0.05). but there was statistically significant increase in all 4 groups after 6 weeks compared to 1 week later(p<0.05). 3. There was no statistically significant difference in removal torque analysis between anodized group and HA coating after anodic oxidation 6 weeks later(p>0.05), but significant difference was appeared in both groups compared to RBM group and smooth-machined group(p<0.05). Conclusions : It can be suggested that changes in surface characteristics affect bone reactions. Anodized and anodized+hydroxyapatite sol-gel coating showed significantly improved bone tissue response to implants, but further study on the effect of hydroxyapatite dissolution is needed.

• 한국산학기술학회논문지
• /
• 제16권7호
• /
• pp.4689-4696
• /
• 2015

본 연구에서는 F사가 맨발 보행 효과에서 착안하여 최적의 착화감과 압력 분산의 효과를 트레킹화에 접목시키기 위해 고안한 3D Bootie 공법을 적용시킨 트레킹화에 대한 생체역학적 분석을 수행하였다. 이를 위해 비교군으로써 M사, K사의 일반 트레킹화에 대하여, 신체 건강한 20대 남성 13명을 대상으로 보행 시 족저압력분포, 하지 근 활성도, 지면반발력을 측정하여 분석하였다. 연구 결과, F사의 트레킹화는 족저압력 분포에서 넓은 접촉 면적으로 인하여 최대 힘과 최대 압력의 감소를 야기했으며, 보행 시 발의 부하를 경감시켰다. 근 활성도 측면에서는 맨발 보행의 효과와 동일하게 작용했다. 지면반발력에서는 효과적으로 충격력을 흡수하여, 말기입각기 때 더욱 효율적인 보행이 가능하였다. 결과적으로 F사의 트레킹화는 맨발 보행의 장점을 이용한 3D Bootie 공법을 적용함으로써 넓은 접촉 면적으로 인해 보행 시 발생하는 발의 부하를 감소시킬 것으로 사료된다.