• Journal of the Korean Home Economics Association
• /
• v.41 no.10 s.188
• /
• pp.1-13
• /
• 2003

The purpose of this study is to make clear the present condition and the reason of noise in one-room ape multi-family housing around the campus by residents' subjective responses. The respondents are 104 residents living in one-room ape multi-family housing around the campus. The results are as follows. 1) The residents show relatively non-positive responses at evening and night on the present condition of noise in outdoor and indoor of building or indoor of house unit. 2) The types of outdoor noise of building are checked frequently are 'talking loudness' and 'traffic noise'. 'Walking and talking sounds in stairs and corridors' among the types of indoor noise of building shows highest percentage. They answer 'living equipment noise' and 'water hammer' as major types of indoor noise of house unit.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.2
• /
• pp.120-126
• /
• 2006

A gate driver with Boot-strap chain is proposed to drive Multi-level PDP sustain switches. The proposed gate driver uses only one boot-strap capacitor and one diode per each MOSFETs switch without floating power supply. By adoption of this gate driver circuits, the size, weight and the cost of the driver board can be reduced.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.2
• /
• pp.62-67
• /
• 2011

In this paper, Multi Mode Receiver Module is designed in one H/W module for Multi-mode Digital Broadcasting. Multi mode means Digital TV, Mobile TV and Digital Radio on the Broadcasting. and T-DMB, DAB(+), ISDB-T and DVB-T standard. Our Module can receive various broadcasting signal such as ISDB-T, DVB-T and DAB. The Multi mode Receiver Module & demuxer was implemented using the one SoC Chip has good performances to receive the multi mode signals as well as standard interface such as SPI, to connect the main CPU Unit.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.119-120
• /
• 2008

A HMD type multi-focus 3D display system is developed and proof about satisfaction of eye accommodation is tested. Four LEDs(Light Emitting Diode) and a DMD are used to generate four parallax images at single eye and any mechanical part is not included in this system. The multi-focus means the ability of monocular depth cue to various depth levels. By achieving multi-focus function, we developed a 3D display system for only one eye, which can satisfy the accommodation to displayed virtual objects within defined depth. We could achieve a result that focus adjustment is possible at 5 step depths in sequence within 2m depth for only one eye. Additionally, the change level of burring depending on the focusing depth is tested by captured photos and moving pictures of video camera and several subjects. And the HMD type multi-focus 3D display can be applied to a monocular 3D display and monocular AR 3D display.

• Journal of Broadcast Engineering
• /
• v.11 no.1 s.30
• /
• pp.107-115
• /
• 2006

In the environment of single application data broadcasting, only one application can be serviced at a specific time on one channel. To overcome this, we developed the structure and the method of operation for multi-applications which are fully conformant to the ACAP (Advanced Common Application Platform), and modified data broadcasting system to support multi-applications. In multi-application environment, broadcasters can service multiple applications simultaneously at a specific airtime on one channel so users can enjoy services selectively according to their preferences. In this paper, we present an example of multi-application service which was developed to make an experiment before servicing them to users on the air. The core of the multi-application is a manager application which manages other ordinary applications, so we describe the function and structure of the manager application, and then present the experimental results to show that the proposed method is the proper model for multi-applications.

• Animal Bioscience
• /
• v.35 no.10
• /
• pp.1585-1591
• /
• 2022

Objective: The present study examined the effects of exogenous emulsifiers and multi-enzyme supplementation into a low energy density diet on growth performance, visceral organ parameters, blood metabolites, ileal morphology, and nutrient digestibility in broiler chickens from hatch to 21 days. Methods: One hundred and sixty-eight one-day-old Ross 308 broiler chickens were allocated in a completely randomized design to 24 pens and each pen was assigned to one of four dietary treatments to give six replications with seven chickens in a cage. Dietary treatments were: i) positive control with standard energy level (PC); ii) negative control with 100 kcal/kg lower energy of the standard level (NC); iii) NC diet supplemented 0.05% calcium stearoyl-2 lactylate as an emulsifier (NC+E); and iv) NC diet supplemented with both 0.05% calcium stearoyl-2 lactylate and 0.05% multi-enzyme (NC+E+M). Corn and soybean meal-based control diets containing vegetable oil were formulated to meet the Ross 308 nutrition specification. Chickens were fed ad-libitum with the treatment diets and sampling was conducted on day 21. Results: Our results revealed that emulsifier and multi-enzyme supplementation into NC diets improved (p<0.05) feed efficiency of the broiler chickens compared to the broiler chickens fed NC diets from hatch to 21 days. Supplementation of emulsifier and multi-enzyme into NC diet improved (p<0.05) nutrient digestibility of the broiler chickens. However, emulsifier and multi-enzyme supplementation into diet did not influence (p>0.05) visceral organ weight, blood metabolites, and intestinal morphology in broiler chickens fed NC diets. Conclusion: Supplementation of emulsifier and multi-enzyme in the NC diet would support improving growth performance in young broiler chickens with improved feed efficiency and increased nutrient digestibility thereby curtailing the negative impact of energy reduction in the diets.

• Structural Engineering and Mechanics
• /
• v.15 no.1
• /
• pp.71-81
• /
• 2003

The governing differential equation for buckling of a one-step bar with the effect of shear deformation is established and its exact solution is obtained. Then, the exact solution is used to derive the eigenvalue equation of a multi-step bar. The new exact approach combining the transfer matrix method and the closed form solution of one step bar is presented. The proposed methods is convenient for solving the entire and partial buckling of one-step and multi-step bars with various end conditions, with or without shear deformation effect, subjected to concentrated axial loads. A numerical example is given explaining the proposed procedure and investigating the effect of shear deformation on the critical buckling force of a multi-step bar.

• Advances in aircraft and spacecraft science
• /
• v.10 no.3
• /
• pp.245-256
• /
• 2023

In order to improve aerodynamic performance of multi-stage axial flow turbines used in aircraft engines, a one-dimensional aerodynamic design and optimization framework is constructed. In the method, flow path is generated by solving mass continuation and energy conservation with loss computed by the Craig & Cox model; Also real gas properties has been taken into consideration. To obtain an optimal result, a multi-objective genetic algorithm is used to optimize the efficiencies and determine values of various design variables; Final design can be selected from obtained Pareto optimal solution sets. A three-stage axial turbine is used to verify the effectiveness of the developed optimization framework, and designs are checked by three-dimensional CFD simulation. Results show that the aerodynamic performance of the optimized turbine has been significantly improved at design point, with the total-to-total efficiency increased by 1.17% and the total-to-static efficiency increased by 1.48%. As for the off-design performance, the optimized one is improved at all working points except those at small mass flow.

• Korean Institute of Interior Design Journal
• /
• v.15 no.1 s.54
• /
• pp.139-146
• /
• 2006

This study shows the floor plan types and the space composition of multi-used toilets in public-toilets of Choongchung-Do. The areas of multi-used toilets are various from 4.8m2 to 10.5m2 And there Is usually one multi-used toilet in one public-toilet, but some public-toilets have two multi-used toilets. Multi-used toilets have several equipments such as toilet stool, urinal, washstand, change diaper, chair for baby-care, toilet stool for child, urinal for child, so on. All the multi-used toilets have toilet stool and washstand, but urinal and change diaper were used restrictively, and chair for baby-care, toilet stool for child, urinal for child were used in few cases. There are six types how the multi-used toilets are located in public-toilets, five types of multi-used toilet forms, and five types how the equipments are installed in multi-used toilets. The dotted blocks are installed partially in line type, and partially in spot type. But some cases, there was no installation of dotted block. Auto-sliding door were usually applicated, and some other types of door system were used restrictively. This study offers not only the present conditions, but also the appropriate planning directions of the multi-used toilets.

• The Korean Journal of Applied Statistics
• /
• v.34 no.3
• /
• pp.389-399
• /
• 2021

In recent years, word embedding has been a popular field of natural language processing research and a skip-gram has become one successful word embedding method. It assigns a word embedding vector to each word using contexts, which provides an effective way to analyze text data. However, due to the limitation of vector space model, primary word embedding methods assume that every word only have a single meaning. As one faces multi-sense words, that is, words with more than one meaning, in reality, Neelakantan (2014) proposed a multi-sense skip-gram (MSSG) to find embedding vectors corresponding to the each senses of a multi-sense word using a clustering method. In this paper, we propose a modified method of the MSSG to improve statistical accuracy. Moreover, we propose a data-adaptive choice of the number of clusters, that is, the number of meanings for a multi-sense word. Some numerical evidence is given by conducting real data-based simulations.