• Textile Coloration and Finishing
• /
• v.12 no.3
• /
• pp.207-217
• /
• 2000

A new, high-efficiency ultrasonic fabric washing machine was developed to be an energy-efficient washing machine and to enhance fabric washing quality in washing processes of the dyeing and finishing process in the textile industry. This system is composed of ultrasonic wave generator, air blowing nozzle, torque motor for fabric tension control, and enclosed washing bath, multi-tube type exchanger, noiseless heater, air cylinder, expander roller, mangle upper and lower rollers, bend bar, dancer, shower spray nozzle, and solenoid valve, and so on. These elements are synergised for fabric washing. One of the very important principles is the low tension fabric running system. For an efficient washing effect, a counter flow system is also adopted. The new system also adopts the dancer and torque motor to control fabric tension and prevent fabric creasing. Shower spray nozzle, counter flow and overflow apparatus, and air-blowing apparatus are adopted to enhance the fabric washing effect. In this study, peach yoryu, exter, and moss crepe fabrics were washed by the general and ultrasonic washing systems under different conditions respectively. The washing efficiency was affected by the fabric running speed and characteristics of fabrics. Size content after washing increased with increasing the fabric running speed. The values in the general washing system were higher than those of the ultrasonic washing system. The changes of conductivity in the ultrasonic and the cooling bath were affected by the running time under the ultrasonic generating. The values of conductivity decreased as the experimental time passed.

• Journal of Sensor Science and Technology
• /
• v.25 no.1
• /
• pp.65-70
• /
• 2016

We devised a method to control the temperature of a liquid bath as low as $-100^{\circ}C$ using the duty cycle control of a solenoid valve. The solenoid valve controls the flow of liquid nitrogen that we used as a cryogen in this system. By controlling the duty cycle of a solenoid valve using feedback from the measured temperature of the liquid bath, we were able to achieve temperature stability within ${\pm}19mK$ around $-100^{\circ}C$. We also demonstrated that by taking average values of the temperature readings for sequence of measurements from more than one thermometer, it is possible to use this system for the calibration of thermometers within 3 mK. This system and the control method can be used for the precise temperature control in the range between $0^{\circ}C$ and $-100^{\circ}C$, where commercially available precision baths are much expensive and hard to be built in customized configurations.

• Journal of the Optical Society of Korea
• /
• v.19 no.3
• /
• pp.217-221
• /
• 2015

Developing a metallization that has low cost and high efficiency is essential in solar-cell industries, to replace expensive silver-based metallization. Ni/Cu two-step metallization is one way to reduce the cost of solar cells, because the price of copper is about 100 times less than that of silver. Alkaline electroless plating was used for depositing nickel seed layers on the front electrode area. Prior to the nickel deposition process, 2% HF solution was used to remove native oxide, which disturbs uniform nickel plating. In the subsequent step, a nickel sintering process was carried out in $N_2$ gas atmosphere; however, copper was plated by light-induced plating (LIP). Plated nickel has different properties under different bath conditions because nickel electroless plating is a completely chemical process. In this paper, plating bath conditions such as pH and temperature were varied, and the metal layer's structure was analyzed to investigate the adhesion of Ni/Cu metallization. Average adhesion values in the range of 0.2-0.49 N/mm were achieved for samples with no nickel sintering process.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.202-205
• /
• 2003

$\beta$-Sulfatoethylsulfone기를 갖는 일시적 수용성 반응성 분산염료는 분산제를 첨가하지 않고도 염욕내에서 단분자 상태를 유지할 수 있으며 염색 공정 중 온도와 pH조건의 변화에 따라 Scheme 1과 같이 비수용성 vinylsulfone form으로 변환된다[1]. 이 때 vinylsulfone기는 섬유와 화학결합을 할 수 있는 대표적인 반응기이므로 이 염료는 일시적 수용성 분사염료와 반응성 염료의 두 성질을 동시에 지닌다[2]. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.88-91
• /
• 2003

미생물의 침해로부터 인체와 섬유제품을 보호하기 위하여 사용되는 항균 가공제로는 아민 또는 제4급 암모늄계, biguanide계, 알코올계, 페놀계, 알데하이드계 등의 유기계, 금속 이온 무기계, 산화물 및 광 촉매계, 유기 무기계, 천연 화합물 등이 있다[1,2]. 이러한 항미생물 가공제는 우수한 살균력, 섬유제품의 고유한 성질을 변화시키지 않는 특성, 탁월한 세탁 내구성, 인체에 대한 무독성 등의 조건을 가져야 한다[2,3]. (중략)

• Resources Recycling
• /
• v.31 no.3
• /
• pp.81-87
• /
• 2022

Energy consumption per unit weight of metal (kwh/kg of metal) is one of the most important economic indicators in the process of molten salt electrolysis. It is related to the heat loss of salt bath and the current efficiency of the process. The current efficiency is highly dependent on electrolysis temperature. On the other hand, the temperature of salt bath may increase significantly due to the difference (larger energy input than consumption) in heat balance at the beginning of electrolysis, which may cause different electrolysis temperature from an initially targeted value. This results in a bad effect on current efficiency. Therefore, it will be helpful to the reduction of energy consumption to compare the calculated and measured values of the temperature change of salt bath through the heat balance review at the early stage of electrolysis and to evaluate the energy loss to outside. In this study, based on the authors' experimental data, the heat balance was reviewed at the beginning of the electrolysis, and it was possible to evaluate the energy loss to the outside and the increase of the temperature of the salt bath quantitatively. Through such a method, heat loss reduction plan can be derived and current efficiency can be improved so that energy consumption can be reduced.

• Fashion & Textile Research Journal
• /
• v.13 no.2
• /
• pp.263-268
• /
• 2011

One-step reduction/dyeing method was applied for ramie dyeing with natural indigo powder. The effect of reduction/dyeing conditions including the pH of bath, dye temperature and time, and concentration of indigo powder and reduction agent on dye uptake and color properties were investigated. Regardless of addition of alkali, the dyed fabrics appeared in the PB Munsell color range(${\lambda}_{max}$: 660 nm) and the dye uptake was much higher with no addition of sodium hydroxide. Dyeing was carried out through the use of only sodium hydrosulfite in the bath. The maximum dye uptake was obtained at 60 for 30min. Saturated dye uptake was obtained at 2 g/L of sodium hydrosulfite concentration up to 2 g/ L of indigo powder. Whereas, at higher indigo powder concentration (4 g/L), more than 3 g/L of reducing agent concentration was required for obtaining the saturated dye uptake. Color reproducibility was reliable with color difference in the range of 0.03~0.16. Regardless of color strength, fastness to rubbing was acceptable with a 3/4~4/5. Fastness to washing, dry cleaning, and light of samples with low color strength were poor. Whereas, fastness to washing, dry cleaning, and light of samples with high color strength were very good.

• Membrane Journal
• /
• v.14 no.2
• /
• pp.126-131
• /
• 2004

The surface of dense polysulfane films was modified through solvent treatment. The modification process consisted of dipping a film for one second in dimethylformamide and then immersing it Into a nonsolvent bath. After being solidified, the original transparent film transformed into an opaque white one, which is due to the light scattering on pores newly developed on the surface. The surface roughness entailing the pore formation was more explicit on a film coagulated by water as nonsolvent than on a film coagulated by isopropanol. The surface-modified films show the better pick-up efficiency than a conventional filter paper on the detaching of radioactive contaminants on the contaminated area. The pick-up efficiency of the film prepared by the water immersion process was superior to that of the film prepared in the isopropanol bath, which was consistent with the surface roughness result. The surface-modified films kept the dense inner structure, playing a major role preventing a possible secondary contamination during the pick-up process.

• Tuberculosis and Respiratory Diseases
• /
• v.68 no.4
• /
• pp.236-239
• /
• 2010

Hot tub lung is a lung disorder associated with exposure to hot tub water contaminated with Mycobacterium avium complex (MAC). Although its pathogenesis remains unclear, it may be considered hypersensitivity pneumonitis (HP) rather than an infectious disease. We report a case which fulfilled the current diagnostic criteria of hot tub lung. A patient had worked as a cleaner in the public bath for approximately one year and presented with dyspnea for over one month. The computed tomographic finding of bilateral ground glass attenuation and pathologic finding of granulomatous inflammation were consistent with HP. MAC was isolated from bronchoalveolar lavage fluid and hot tub water. After corticosteroid treatment without antimycobacterial medication, the patient improved and there has been no recurrence. The patient has since discontinued working in the public bath.

• The Journal of Korean Medicine
• /
• v.29 no.1
• /
• pp.117-133
• /
• 2008

Objectives : Since ancient times, Koreans have applied medicinal spabaths for treatment of various diseases. The objective of this study was to investigate the effect of strontium, one of the common ingredients of such baths, experimentally on acute skin barrier damage. Materials and Methods : Male hairless mice, average weight 20g, were divided into six groups. Each group consisted of five mice. The first was the normal, non-treated group. The second was the control group with acute skin barrier damage intentionally induced by TS. The third was the Ba-Sr1 group bathed in 1mg/L strontium chloride before and after inducing acute skin barrier damage by TS. The fourth was the Ba-Sr7 group bathed in 7mg/L strontium chloride before and after inducing acute skin barrier damage by TS. The fifth was the Sr1 group bathed in 1mg/L of strontium chloride only after intentionally inducing acute skin barrier damage by TS. The sixth was the Sr7 group bathed in 7mg/L of strontium chloride only after intentionally inducing acute skin barrier damage by TS. External changes of skin, skin erythema level, transepidermal water loss level, and GOT and GPT level of each group were checked immediately before and after TS, 3 hrs, 5 hrs and 24 hrs after inducing acute skin barrier damage. Then, tissue samples were made and examined for damage to epithelial cells, stratum corneum, change of mucous polysaccharide in dermis and amount of mast cells. Statistical analysis was performed by one way-ANOVA, Scheffe and Duncan for a post hoc test and pairwise comparison for comparing for difference between each time. Statistical significance was achieved if the probability was less than 5% (p<0.05) Results : 1. From skin erythema and TEWL level indicating the function of the skin barrier, we can know that it is helpful to the skin barrier to bathe in a water solution including a low concentration of strontium. 2. In the control group with acute skin barrier damage induced by TS, skin barrier damage persisted until 3-5 hrs and recovered after 5-24 hrs. Differently from the control group, in the case of taking a bath in a water solution including strontium, skin barrier damage recovered after only 3-5 hrs. Therefore, the bath with a water solution including strontium can promote recovery of the skin barrier. 3. Bathing in water solution including a higher concentration of strontium was more beneficial to recovery of skin barrier damage. 4. There was no influence on serum GOT and GPT from bathing in a water solution including strontium. Conclusions : The strontium was effective for recovery and mitigation of acute skin barrier damage induced by tape stripping. I suggest that strontium (Sr) can be used as an external treatment medicine, addedinto bath water to treat acute skin barrier damage.