• Parasites, Hosts and Diseases
• /
• v.24 no.2
• /
• pp.201-204
• /
• 1986

A study on the effect of diethylcarbamazine (DEC) (Supatonin) against Brugia malayi infection was conducted on Cheju Island in September 1965. A total of 182 persons living in a village of Aiwol Myun, Bukcheju-Gun was examined for microfilaraemia. Microscopic examination of smears of $20{\mu}l$ of blood revealed a microfilaria positivity rate of 28.5%. At the end of September 1965, 34 confirmed microfilaria positive cases were treated with DEC at a daily dosage of 5mg/kg body weight. A full course of 12 days of drug administration divided of two rounds for 6 days each was used. The first round of treatment was given under a strict supervision of the author in order to observe carefully side-effects of the drug. The second round of treatment was given in January 1966. The microfilaria density in $20{\mu}l$ of blood of those who received the drug was checked four times; before the treatment, during the first round of the treatment, 2 weeks and 4 months after the completion of the first round. The pre-treatment mean microfilaria density of 104.6 diminished to nearly zero (only two cases with one microfilaria respectively) 2 weeks after the first round and again slightly rose up to 0.5 four months after the first round. These results indicate that DEC (Supatonin) is highly effective to eliminate the microfilaria of B. malayi. However, severe side-effects, e.g. fever (average $38.6^{\circ}C$, maximum $39.7^{\circ}C$), headache, backache and seldom abdominal discomfort etc. were observed. There were two cases of withdrawal from the scheme due to refusal.

• Transactions of Materials Processing
• /
• v.8 no.4
• /
• pp.331-339
• /
• 1999

In this study, to analyze the shaped drawing process from round bar, the practical conical die with considering die radius and bearing was defined by a mathematical expression, and also a simple technique for initial mesh generation to the shaped drawing process was proposed. The drawing of rectangular section from round bar, one of the shaped drawing process, has been simulated by using non-steady state 3D rigid plastic finite element method in order to evaluate the influence of semi-die angle and reduction in area to corner filling. Other process variables such as friction constant, rectangular ratio, die radius and bearing length were fixed during the simulation. An artificial neural network has been introduced to obtain the optimal process conditions which gave rise to a fast simulation.

• Journal of Multimedia Information System
• /
• v.7 no.2
• /
• pp.137-140
• /
• 2020

In this paper, we propose a simplified tag collection algorithm to improve the performance of ISO / IEC 18000-7, the standard of active RFID systems. In the proposed algorithm, the collection command is modified to include the result of the listening period response from the previous round. The tag, which has received the collection command, checks whether the slot to which it has responded is collided, transmits additional data to its data slot without a point-to-point read command and sleep command, and transitions to the sleep mode. The collection round in the standard consists of a series of collection commands, collection responses, read commands, read responses, and sleep commands. On the other hand, in the proposed tag collection algorithm, one collection round consists only of a collection command and a collection response. As a result of performance analysis, it can be seen that the proposed technique shows superior performance compared to the standard.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1702-1707
• /
• 2007

The reduction of pipe-thickness induced by flow accelerated corrosion (FAC) is one of the most serious problems on the maintenance of piping system in nuclear power plants (NNP). If the thickness of a pipe component is reduced below the critical level, it cannot sustain pressure and consequently results in leakage or rupture. For this reason, wall thinning by FAC has been inspected in secondary side piping systems in NPPs. In this research Round Robin Test (RRT) was conducted to verify confidence of wall thinning measurement system in NPP. 12 inspectors from 3 companies participated and 23 specimens were used according to standard practice in RRT. The gage R&R analysis was introduced in regard to repeatability and reproducibility that are affected to measurement system errors. Confidence intervals of thickness measurement system were obtained.

• Journal of the Korea Furniture Society
• /
• v.27 no.4
• /
• pp.325-334
• /
• 2016

This study explores developing a large round table with Bosang flower pattern for a contemporary meeting room made by a cabinet maker, Kim Byeung-soo, who has built the traditional Korean furniture in Korean Western Gyeongnam Province since after his elementary school. He uses the post finger joint from one of the middle level of his education process based on the traditional Korean technique, develops it into flower stem joint, and adds flower patterns' carving decoration called Bosang flower patterns. Hence, the table makes the table be strong, useful, and beautiful. Therefore, the modernized round table will be able to make the people access more easily and to make more demand on the traditional Korean furniture and the adopted furniture than ever.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.42-49
• /
• 2004

Electrical discharge machining (EDM) is one of the most extensively used non-conventional material removal process. The recent trend in reducing the size of product has given micro EDM a significant amount of research attention. Micro EDM is capable of machining not only micro holes and micro shafts as small as a few micrometers in diameter but also complex three dimensional micro cavities. But, longitudinal tool wear by electrical discharge is indispensable and this affects the machining accuracy in micro EDM process. Therefore, newly developed tool wear compensation strategy called round trip method is suggested and verified by experiment. In this method, machining depth of cut, overlap effect and critical travel length are also considered.

• Journal of the Korean Society of Visualization
• /
• v.5 no.2
• /
• pp.56-63
• /
• 2007

Flow visualization and aerodynamic characteristics of delta wings with two different leading edge geometries are investigated by PIV system and wind tunnel balance when the Reynolds number is about based on the freestream velocity and the root chord length. Delta wing models have 65-deg swept angle, and the leading edge shapes are divided into round- and sharp- type. The experimental results indicated that the leading-edge vortex strength and aerodynamic coefficient in the round leading edge are stronger and more, respectively than those in the sharp one. Therefore the flow interactions between vortices and the boundary layer are more desirable or more rapidly swirled in the round-type leading edge.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.1041-1044
• /
• 2002

Inchworm linear motor is one of the ultra precision position apparatuses and has many kinds of forms and structures according to the conditions of working space and range. In this paper, the Inchworm linear motor consists of three PZTs(Piezo-electric transducer), three columns ma two plates. finite element method was used to determine the type or hinges installed in column of inchworm linear motor DOE(Design of experiment) was used to determine the optimal design condition of a column by comparing the von-mises stresses according to the change of thickness of hinge, round of hinge, height of arm, angle of v-notch, round of v-notch and thickness of column. From the result, round of hinge, height of arm and thickness of hinge were determined a effective design parameters.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.11
• /
• pp.1012-1019
• /
• 2000

A proficiency test is one of programs which Korea Research Institute of Standards and Science(KRISS), as national metrology institute, is putting in operation for the mutual recognition arrangement. The Fluid Flow Group of KRISS evaluated the measurement capability for liquid flowmeter calibrator of the national calibration and test organizations. The uncertainty of national standard system was estimated in accordance with Guide to The Expression of Uncertainty in Measurement (ISO), and the turbine flowmeter, which was used for the round-robin test as a reference flowmeter, was characterized. The round-robin tests with the turbine flowmeter package were carried out in 1995 and 1999. The test results of the organizations and those of KRISS agreed within $\pm0.2$%. It is found thus that the organizations have the traceability of the national standard for liquid flow measurement.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.7
• /
• pp.437-443
• /
• 2004

In this work the AC loss measurement setup based on an iron core background magnet, not used in a conventional one, has been successfully developed. To prove its validity, a round-robin test for the same Bi-2223 tape sample among three institutes has been done. The results show that the self-field and magnetization losses from the developed setup well agree with the losses measured at two other institutes of Korea Basic Science Institute and Yokohama National University. The measured magnetization losses for parallel or perpendicular fields can be well predicted from the slab model or the strip model for a filamentary region. However the magnetization losses for longitudinal fields can be rather predicted by the slab model for a decoupled filament. The self-field losses are well explained by the Norris ellipse model.