• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.261-264
• /
• 2006

Many process parameters have an effect on the auto-body panel forming process. A well-designed blank shape causes the material to flow smoothly, reduces the punch and yields a product with uniform thickness distribution. Therefore, the determination of an initial blank shape plays the important role of saving time and cost in the auto-body panel forming process. For these reasons, some approaches to estimate the initial blank shape have been implemented in this paper, the one-step approach by using a finite element inverse method will be introduced to predict the initial blank shape the developed program is applied to auto-body panel forming.

• Journal of computational fluids engineering
• /
• v.2 no.2
• /
• pp.35-43
• /
• 1997

An efficient inverse method for 1.he supersonic/hypersonic axisymmetric body design is developed for the parabolized Navier-Stokes equations. The developed method is examined numerically for three extreme testcases in the supersonic(M/sub ∞/=3.0) and hypersonic(M/sub ∞/=6.28) speeds. The first one is a negative pressure distribution near a vacuum pressure and the second one is a positive pressure distribution over the whole region of the body. The last one is the case of abrupt change of pressure distribution to zero in the forward region of the body. These testcases show the robustness of the method. By introducing a regular-falsi method and by using a not-fully converged inverse solution, the convergence behavior was greatly improved.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.2
• /
• pp.203-211
• /
• 2012

The main object of this experiment is to estimate the hydrodynamic forces acting on a submerged streamlined body placed in a one-end-opened cylindrical tube moving with certain translational velocity. The best experimental design for this object is mimicking real situation, however sizes of model body and cylinder tube are just the same as those of real, for avoiding scale effects, mimicking real situation is not realizable. Hence, in this experiment, target body and cylindrical tube were designed to be towed with varying body position relative to cylindrical tube. For measuring hydrodynamic forces and flow velocity in the cylindrical tube, six one-component load cells and several one-hole Pitot tubes were used. Several conditions were checked with various end-plates those had different opening areas. Experiment results show that forces and flow velocity had different tendency with those expected, and the presence of a end-plate slows down the flow velocity in the cylindrical tube and affects pressure field in the tube to push the model submerged body forward of the tube. This tendency grows with decreasing opened area.

• Journal of Fashion Business
• /
• v.10 no.4
• /
• pp.55-69
• /
• 2006

The purpose of this study is to evaluate the differences of visual effects by variations in the location and width of the waist band of one-piece dress. The stimuli are 24 samples: 8 variations of the location of the waist band and 3 variations of the width of the waist band. The data has been obtained from 50 fashion design majors. The data has analyzed by Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of the study are as follows: According to the result of factor analysis of the visual effects based on the changes in the location and width of waist bands for one-piece dress, four factors were identified - verticality of whole-body, horizontality of upper-body, curves of lower-body and shape of breast. Whole-body verticality and upper-body horizontality were found to be the most important factor among them. In all of the four factors of the visual effects, significant differences were observed according to the location of the waist bands for one-piece dress. The visual effects were evaluated positively when the waist bands were positioned above the natural waist line and negatively when the waist bands were positioned below the natural waist line. In addition, significant differences were observed in the visual effects according to the width of waist bands when the waist bands were positioned above the natural waist line, and visual effects were better when the band width was 3.5cm and 4.5cm than the others. The interaction of the visual effect showed significant differences in horizontality of upper-body, curves of lower-body and shape of breast.

• Journal of Korean Academy of Nursing
• /
• v.27 no.1
• /
• pp.49-60
• /
• 1997

The purpose of this study was to determine the incidence of malnutrition among patients on admission to hospital, to monitor changes in their nutritional status during hospitalization, and to determine the factors which might affect changes in nutritional status. The subjects for the study were patients who were admitted to general medicine for more than one week. Patients suffering from cardiovascular. renal disease, or dehydration were excluded. Nutritional assessment of the patients was performed on admission and nutritional status was reassessed one week and two weeks after admission. The nutritional assessment tool consisted of subjective history taking and anthropometric measurements. Biochemical measurements were performed only on admission. For anthropometric assessment : patients' body weight, subcutaneous skinfolds thickness, % of body fat, body mass index, and lean body mass were measured using caliper or Bio impedance Analyzer. Factors which might influence current nutritional status, like dietary intake, anorexia, nausea, vomiting, diarrhea, sleep disturbance, and number of days of NPO for diagnostic examinations were analyzed. The results are as follows : 1. Of the 59 patients who were studied, 61% were male and 39% female. The nutritional status of all of the 59 subjects was reassessed one week after admission, but it was only done for 22 subjects at two weeks. 2. The anthropometric measurements. including weight body mass index, lean body mass, body fat. and skin fold thickness. were all significantly decreased at one week after admission compared to the values at admission. On the other hand, two weeks after admission, only body weight and abdominal skinfolds thickness were decreased. 3. The subjects reported anorexia for an average of two days, sleep disturbance for two days, and no food intake due to diagnostic test for one day. In the second week of hospitalization, almost none of the patients complained of gastrointestinal symptoms or sleep disturbance except anorexia. Food consumption which was measured based on rice intake was 60% of the food served during the first week of hospitalization, and 66% during the second week of hospitalization. 4. There was no correlation between the subjective nutritional assessment and anthropometric assessment. 5. There was no statistical significance in anthropometric measurements among the patients with various diseases whereas sleep disturbance and no food intake due to various diagnostic test was prominent in patients with gastrointestinal diseases.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1135-1138
• /
• 2003

The transformer is major equipment in power receiving and substation facilities. Necessary conditions required for the transformer are compactness, lightness, high reliability, economic advantages, and easy maintenance. The pole-mount transformer installed in distribution system is acting direct role in supply of electric power and it is electric power device should drive for long term. Most of modem transformer are oil-filled transformer and accident is happening considerable. The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and low loss. One body molding transformer needs some cooling method because heat radiation between each winding is difficult. In this paper, The thermal analysis of pole mount mold transformer with one body molding by duct condition is investigated and the test result of temperature rise is compared with simulation data.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.414-417
• /
• 2005

Many process parameters have an effect on the auto-body panel forming process. A well-designed blank shape causes the material to flow smoothly, reduces the punch and yields a product with uniform thickness distribution. Therefore, the determination of an initial blank shape plays the important role of saving time and cost in the auto-body panel forming process. For these reasons, some approaches to estimate the initial blank shape have been implemented in this paper, the one-step approach by using a finite element inverse method will be introduced to predict the initial blank shape the developed program is applied to auto-body panel forming.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.3
• /
• pp.218-222
• /
• 2011

This paper proposes a single-joint optical torque sensor with one body structure. Conventional optical torque sensors consist of three parts, two plates and an elastic structure. They have slightly slipping problem between plates and elastic structure due to the manufacturing tolerance. Since the order of measurement range of optical sensor is about ten micrometers, the slipping problem causes large measurement error, especially in the case of vibrational or high speed plant. This problem does not occur in the proposed design due to the one body structure. The proposed sensor has advantage of low cost, light weight, and small size. And it is easy to design and manufacture. Simulation works that analysis of stress and strain are performed accurately. To demonstrate the performance of proposed sensor, experiments were implemented to compare with a commercial force/torque sensor (ATI Mini45).

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.419-422
• /
• 2005

Many process parameters have an effect on the auto-body panel forming process. A well-designed blank shape causes the material to flow smoothly, reduces the punch and yields a product with uniform thickness distribution. Therefore, the determination of an initial blank shape plays the important role of saving time and cost in the auto-body panel forming process. For these reasons, some approaches to estimate the initial blank shape have been implemented in this paper, the one-step approach by using a finite element inverse method will be introduced to predict the initial blank shape the developed program is applied to auto-body panel forming.

• Journal of Biomedical Engineering Research
• /
• v.38 no.5
• /
• pp.232-236
• /
• 2017

In this study, We investigated the effect of foot cooling on the reduction of body temperature after hard exercise at the high temperature of $40^{\circ}C$. We performed a total of 30 subjects, and the subjects performed treadmill exercise for 30 minutes. We produced the cooling device to cool the foot using Peltier module. After the end of the exercise, We performed normal recovery method and cooling recovery method(one foot, both feet) for 1 hour on the same indoor environmental conditions and confirmed the change of body temperature of subjects. The results of deep body temperature measurement showed average $38.78{\pm}0.22^{\circ}C$ to $38.54{\pm}0.15^{\circ}C$ when the normal recovery method was performed. Cooling recovery method on one foot showed average $38.69{\pm}0.14^{\circ}C$ to average $38.06{\pm}0.17^{\circ}C$ and Cooling recovery method on both feet showed average $38.69{\pm}0.15^{\circ}C$ to average $37.84{\pm}0.21^{\circ}C$. There was a significant difference between the normal recovery method and the one foot cooling recovery method(p < .05), there was a significant difference between the normal recovery method and the both feet cooling recovery method(p < .05) and there was a significant difference between the one foot cooling recovery method and the both feet cooling recovery method(p < .05). Body temperature showed the lowest decrease rate when the normal recovery method was performed, and body temperature showed the highest decrease rate when the both feet cooling recovery method was performed. Therefore, recovery of cooling on the foot after hard exercise have decreased body temperature, delay fatigue in the body, and will be contributed to improvement of athlete performance.