• Korean Chemical Engineering Research
• /
• 제47권3호
• /
• pp.321-326
• /
• 2009

간단한 기체농도 측정장치를 제안하여, 혼합기체를 분리하는 흡착공정에서 성능을 실험적으로 조사하였다. 측정센서는 수정진동자의 전극에 고체의 흡착제를 도포하여 유효성분을 선택적으로 분리하게 하여 농도를 측정하였다. 센서용 흡착제는 마이크로 입자의 카본 크라이오젤(Micro-Particle Carbon(MCC))을 사용하였고, 공기와 i-부탄의 혼합기체를 대상으로 대나무 활성탄을 채운 칼럼에서 분리하는 공정을 사용하였다. 칼럼의 입구와 출구에 측정시스템을 각각 장치하고 i-부탄의 농도를 측정하였다. 입구와 출구의 실제농도를 GC로 측정한 결과와 측정한 수정진동자의 공진주파수를 비교하여 제안한 측정시스템이 유용하게 농도를 측정할 수 있음을 보였다. 실험을 통하여 제안하는 시스템이 비교적 간단한 장치로, 실시간 인라인 측정이 가능함을 입증하여 실제공정에 유용하게 활용할 수 있음을 보였다.

• 대한전기학회논문지
• /
• 제31권7호
• /
• pp.11-17
• /
• 1982

In this paper, a reliable and convenient evaluation method for the adequacy of any radial distribution line's voltage drop is proposed for improvement of the voltage regulation of the distribution line under operation. Using the voltage measurement of the first load branch point and the last point on the given distribution line its average line voltage drop and the line voltage drop variance by pure load variation are computed. And by these values and allowable or required line drop from proper voltage regulation view point, present adequency index and operation improvement index of the line drop are newly introduced for the evaluation of the given distribution line's voltage regulation. As a result of application to the 4 cases of study, the proposed method is proved to be reliable and convenient.

• 대한전자공학회논문지SP
• /
• 제47권4호
• /
• pp.112-118
• /
• 2010

본 논문에서는 시간지연신경회로망과 주파수영역의 파라미터를 가지는 선스펙트럼 쌍을 사용하여 정규화 방법에 기초한 잡음억제 시스템을 제안한다. 먼저, 시간지연신경회로망은 선형예측분석하여 구해진 잡음이 부가된 음성신호의 선스펙트럼 쌍을 학습시킨다. 그리고 제안한 시스템은 시간지연신경회로망을 학습시킴으로써 배경잡음에 의하여 열화된 잡음이 부가된 음성신호를 강조한다. 따라서 제안한 시간지연신경회로망은 학습에 의하여 잡음이 부가된 선스펙트럼 쌍의 값을 잡음이 부가되기 전의 값으로 복원하여 잡음을 억제한다. 제안한 시스템은 스펙트럼 왜곡율의 평가법을 사용하여 배경잡음에 의하여 열화된 음성 신호에 대하여 효과적인 것을 확인한다.

• 정보학연구
• /
• 제7권3호
• /
• pp.1-10
• /
• 2004

옥내${\cdot}$외의 전력선 환경에 대한 정확한 채널 모델링에 관한 노력이 최근에 이루어지고 있다. 알려진 일반표준, 제한과 발표된 모델들은 특별한 형태의 접근들이였다. 본 논문에서는 더 신속하고 효율적인 전력선 통신 실험을 위한 전력선 채널 모델링에 관한 연구이다. 용량성 부하 시뮬레이터는 전력선 옥내 망 모뎀 개발에 필수적인 장비이다. 총 244 경우의 용량성 부하 변화에 대한 주파수 응답 특성 측정으로 채널 모델링을 수행하였다. 본 측정 실험에서 PLC는 일반적으로 알고 있었던 특성 보다 더 확정적인 매체라는 것을 확인하였다.

• 전기학회논문지P
• /
• 제56권2호
• /
• pp.109-114
• /
• 2007

This paper summarize about the auxiliary electrode measured a ground resistance. The method to measure a ground resistance is the fall-of-potential method to using an auxiliary electrode. And an auxiliary electrode must be set up on the ground. Today it is so difficult to set up the auxiliary electrode on the ground because of many concrete building and many paved roads. So this paper is regarding a trust analysis of the ground resistance measurement by the substitute auxiliary electrode. It substituted a iron structure around the building, a neutral line multiplex ground to earth, a wire net for auxiliary electrode. This information is confirmed bv compared with the measurement value.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.93-96
• /
• 2000

This study discusses a non-contact optical technique, phase shifting electronic speckle pattern interferometry, that is well suited for a deformation measurement. However, the phase shifting method has difficulties for determinating a deformation quantitatively beacuse of the characteristics of arctan function. In order to solve this problem, phase unwrapping methods has been studied during the last few years. In this study, using phase unwrapping based on line by line scanning phase shifted fringe patterns are studied to determinate a deformation quantitatively. Also least square fitting method is applied to reduce noise and improve image resolution.

• 소성∙가공
• /
• 제16권4호
• /
• pp.313-316
• /
• 2007

The purpose of this paper is the development of measurement algorithm for green-sheet based on the digital image processing technique. The Low Temperature Co-fired Ceramic(LTCC) technology can be employed to produce multilayer circuits with the help of single tapes, which are used to apply conductive, dielectric and/or resistive pastes on. These single green-sheets must be laminated together and fired at the same time. Main function of the green-sheet film measurement algorithm is to measure the position and size of the punching hole in each single layer. The line scan camera coupled with motorized X-Y stage is used. In order to measure the entire film area using several scanning steps, an overlapping method is used.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2319-2321
• /
• 2002

This paper suggests a computer-based on-line measurement method of tan$\delta$ and capacitance for HV capacitor. The method employs V-I technique using scaled down analog voltage and current signal obtained by digital oscilloscope. The measurement results are displayed by graphic user interface with graphic language. Field tests were tarried out at 6.6kV testing voltage in Samhwa Capacitor company.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.903-906
• /
• 1997

When large capacity generation stations that consist of several large units tend to pull out of step from main power system, stabilizing control scheme as emergency control for preventing loss of synchronism of the whole stations with the remaining system is devided into two steps that the first step is to perform on-line prediction for out-of-step and the next step is on-line calculation of the amount of generation shedding for the rest of generators to be in step when out of step is expected. This paper presents on-line prediction scheme for out-of-step based on P-$\delta$ curve estimation using real-time measurement and on-line calculation of generation shedding. The proposed stabilizing scheme was applied to case study of real power system and the results obtained by the method compare well with the results by simulation.

• 한국소음진동공학회논문집
• /
• 제26권4호
• /
• pp.420-427
• /
• 2016

Diverse research on gearing systems have been made to resolve gear NVH problems for many decades, and transmission error (T.E.) has been identified as one of the main sources generating gear noises. While gear profiles and amounts of tooth modifications have influences on gear noise in the design aspect, it is found that bad manufacturing conditions such as burrs, bumps and damage, which result in improper gear operating conditions, produce gear noise with respect to manufacturing process. In this paper, T.E. measurement system was introduced to examine the gears damaged or improperly manufactured, while they are assembled, by comparing T.E. values and various gear conditions with theoretical ones. This T.E. measurement system, following grinding machining process, has been installed in a manufacturing line in 2014, and it results that the transmission rework to resolve manufacturing problems is not needed at the end of line.