• 전기학회논문지P
• /
• 제66권1호
• /
• pp.27-32
• /
• 2017

This paper presents a Daubechies wavelet-based fault detection method for fault identification in transmission lines. After the Daubechies wavelet coefficients are calculated, the proposed algorithm has been implemented difference equation using C language. We have modeled a 154kV transmission line using the ATPDraw software and have acquired test data. In order to evaluate effects of DC offset, simulations carried out while varying an inception angle of the voltage $0^{\circ}$, $45^{\circ}$, $90^{\circ}$. For performance evaluation, fault distance was varied. As we can see from the off-line simulation, the proposed algorithm shows rapid and accurate fault detection. Also we can see the proposed algorithm is not affected by the fault inception angle change.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권3호
• /
• pp.18-23
• /
• 2006

The formation degree of sustain (ITO pattern) determines the quality of a PDP (Plasma Display Panel). Thus, in the present study, we attempt to detect 100% of the defects that are larger than $30{\mu}m$. Currently, the inspection method in the PDP manufacturing process is dependent upon the naked eye or a microscope in off-line mode. In this study, a prototype inspection system for PDP ITO patterned glass is developed. The developed system, which is based on a line-scan mechanism, obtains information on the defects and sorts the defects by type automatically. The developed inspection system adopts a multi-vision method using slit-beam formation for minimum inspection time and the detection algorithm is embodied in the detection ability. Characteristic defects such as pin holes, substances, and protrusions are extracted using the blob analysis method. Defects such as open, short, spots and others are distinguished by the line type inspection algorithm. It was experimentally verified that the developed inspection system can detect defects with reliability of up to 95% in about 60 seconds for the 42-inch PDP panel.

• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.475-490
• /
• 2019

The detection of structural damage without a priori information on the healthy state is challenging. In order to address the issue, the study presents a baseline-free approach to detect damage in beam structures based on an actual influence line. In particular, a multi-segment function-fitting calculation is developed to extract the actual deflection influence line (DIL) of a damaged beam from bridge responses due to a passing vehicle. An intact basis function based on the measurement position is introduced. The damage index is defined as the difference between the actual DIL and a constructed function related to the intact basis, and the damage location is indicated based on the local peak value of the damage index curve. The damage basis function is formulated by using the detected damage location. Based on the intact and damage basis functions, damage severity is quantified by fitting the actual DIL using the least-square calculation. Both numerical and experimental examples are provided to investigate the feasibility of the proposed method. The results indicate that the present baseline-free approach is effective in detecting the damage of beam structures.

• 한국산업정보학회논문지
• /
• 제7권4호
• /
• pp.29-36
• /
• 2002

본 연구에서는 영상분할기법을 이용한 스캔라인기법에 기초하여 영역 이미지의 새로운 에지 결합방식을 제시한다. 본 논문에서 제시한 기존 알고리즘은 3차원 영상을 2차원 영상으로 적용하는 과정에서 깊이의 정보, 조명등의 영향으로 심한 잡음이 발생하여 이로 인해 정밀측정에 많은 어려움이 있었다. 기존의 스캔라인기법은 광원에 의해 직선추출의 형상인식에서만 활용하였으나 이를 원호에 적용 정밀측정 하였다. 본 연구로 인한 오프라인(Off-line)의 검사방식을 온라인(On-line) 방식에서도 정밀측정이 가능함을 입증하였다.

• International Journal of Contents
• /
• 제10권3호
• /
• pp.35-40
• /
• 2014

Text line segmentation is a critical task in handwritten document recognition. In this paper, we propose a novel text-line-segmentation method using baseline estimation and watershed. The baseline-detection algorithm estimates the baseline using Adaptive Head-Tail Connection (AHTC) on the document. Then, the watershed method segments the line region using the baseline-detection result. Finally, the text lines are separated by watershed result and a post-processing algorithm defines the lines more correctly. The scheme successfully segments text lines with 97% accuracy from the handwritten document images in the ICDAR database.

• 전기학회논문지
• /
• 제63권3호
• /
• pp.376-382
• /
• 2014

E-Actuator is an essential part of an eVGT, it receives the command from the main ECU and controls the vane. An e-Actuator failure can cause an abrupt change in engine output and it may induce an accident. Therefore, it is required to detect anomalies in the e-Actuator in real time to prevent accidents. In this paper, an e-Actuator fault detection method using on-line parameter identification is proposed. To implement on-line fault detection algorithm, many constraints are considered. The test input and sampling rate are selected considering the constraints. And new recursive system identification algorithm is proposed which reduces the memory and MCU power dramatically. The relationship between the identified parameters and real elements such as gears, spring and motor are derived. The fault detection method using the relationship is proposed. The experiments with the real broken gears show the effectiveness of the proposed algorithm. It is expected that the real time fault detection is possible and it can improve the safety of eVGT system.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권3호
• /
• pp.131-137
• /
• 2005

This paper describes a new approach to the algorithm and fundamental characteristics of the device for monitoring the leakage currents flowing through zinc oxide (ZnO) surge arresters. In order to obtain a technique for a new on-line monitoring device that can be used in the deterioration diagnosis of ZnO surge arresters, the new algorithm and on-line leakage current detection device for extracting the resistive and capacitive currents using the phase shift addition method were proposed. The computer-based on-line monitoring device can sense accurately the power frequency leakage currents flowing through ZnO surge arresters. The on-line leakage current monitoring device of ZnO surge arresters proposed in this work has the high sensitivity compared to the third harmonic leakage current detection devices. As a consequence, it was found that the proposed leakage current monitoring device would be useful for forecasting the defects and degradation of ZnO surge arresters.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권2호
• /
• pp.643-661
• /
• 2018

This paper proposes a novel algorithm for lane detection based on inverse perspective transformation and Kalman filter. A simple inverse perspective transformation method is presented to remove perspective effects and generate a top-view image. This method does not need to obtain the internal and external parameters of the camera. The Gaussian kernel function is used to convolute the image to highlight the lane lines, and then an iterative threshold method is used to segment the image. A searching method is applied in the top-view image obtained from the inverse perspective transformation to determine the lane points and their positions. Combining with feature voting mechanism, the detected lane points are fitted as a straight line. Kalman filter is then applied to optimize and track the lane lines and improve the detection robustness. The experimental results show that the proposed method works well in various road conditions and meet the real-time requirements.

• 전자공학회논문지
• /
• 제53권2호
• /
• pp.133-140
• /
• 2016

해안 수중 감시를 위하여 분산센서망를 해안에 설치하고, 이를 이용하여 표적을 탐지하고 표적의 위치를 추정하는 연구가 많이 이루어지고 있다. Zhou 등은 표적 탐지만 가능한 간단한 구조의 센서들로 구성된 분산센서망에서 표적을 탐지한 센서들의 위치 정보를 활용하여 표적의 위치를 추정하는 기법을 제안하였다. Zhou 등이 제안한 기법은 다른 기존의 기법에 비해 표적탐지 신호의 전파모델에 대한 파라미터들을 별도로 추정할 필요가 없고, 연산량이 적으며, 분산센서망에서 적은 량의 데이터만 송수신하여도 된다. 그러나 Zhou 기법은 표적의 위치 추정오차가 크다. Ryu는 추정오차를 줄이기 위하여 Zhou 기법을 수정하였다. 수정된 Zhou 기법은 Zhou 기법보다 추정성능이 향상되었지만, 여전히 비교적 큰 추정오차를 가지고 있다. 본 논문에서는 수정된 Zhou 기법으로 구한 표적의 방위각을 나타내는 직선과 표적을 탐지한 센서들과의 기하학적 구조를 고려한 표적위치 추정기법을 제안하였으며, 수정된 Zhou 기법에 기반을 두고 있다. 제안한 기법의 표적위치 추정성능이 Zhou 기법과 수정된 Zhou 기법 보다 향상되었음을 컴퓨터 시뮬레이션을 통하여 확인하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권3호
• /
• pp.174-179
• /
• 2005

This paper presents 3D line segment extraction method, which can be used in generating 3D rooftop model. The core of our method is that 3D line segment is extracted by using line fitting of elevation data on 2D line coordinates of ortho-image. In order to use elevations in line fitting, the elevations should be reliable. To measure the reliability of elevation, in this paper, we employ the concept of self-consistency. We test the effectiveness of the proposed method with a quantitative accuracy analysis using synthetic images generated from Avenches data set of Ascona aerial images. Experimental results indicate that the proposed method shows average 30 line errors of .16 - .30 meters, which are about $10\%$ of the conventional area-based method.