• Journal of radiological science and technology
• /
• v.31 no.3
• /
• pp.239-247
• /
• 2008

In order to study the occurrence of symptoms of musculoskeletal disorders of radio-technologists employed at metropolitan general hospitals and the factors that influence such occurrence, standardized questionnaire by NIOSH that was modified and supplemented to be suitable for conditions in Korea was used. Answers collected from 143 radio-technologists in two weeks from June 13, 2007 were analyzed and the results are as follows. Factor that influence symptoms of musculoskeletal disorders by area were analyzed through multiple logistic regression analysis and the results found that in the neck area, risk increased as the burdening work category 2(Korea ministry of labor)(OR=3.94) and burdening work category 9(Korea ministry of labor)(OR=4.72) increased. In the shoulder region, risk increased as burdening work category 2(Korea ministry of labor)(OR=5.36), burdening work category 7(Korea ministry of labor)(OR=3.90), and burdening work category 9 (Korea ministry of labor)(OR=5.76) increased. In the arm/hand/wrist regions, risk increased as burdening work category 2 (Korea ministry of labor) (OR=6.91), and burdening work category 9 (Korea ministry of labor)(OR=3.76) increased. In the lower back region, risk increased as burdening work category 2 (Korea ministry of labor) (OR=3.06), and burdening work category 8 (Korea ministry of labor)(OR=8.14) increased. In the leg/knees/foot regions, risk increased as burdening work category 2 (Korea ministry of labor) (OR=3.63), and burdening work category 9 (Korea ministry of labor)(OR=2.96) increased. Conclusively, in factors that influence musculoskeletal disorder symptoms in radio-technologists, influence of subjective health conditions, total work experience, experience in current division, and burdening work category 2, 7, 8, and 9 (Korea ministry of labor) were most significant. Therefore, for preventive management, in addition to ergonomic and educational intervention for correcting improper posture during work, efforts for break time adjustment and stress reduction is needed, and encouragement and support for regular exercise is needed.

• 한국해양학회지
• /
• v.30 no.5
• /
• pp.480-492
• /
• 1995

Petrographic investigation has been carried out to determine the composition of the beach sediments and the affecting factors which have controlled their compositional variations from Hyupjae, Aeweol, Iho, Samyang, Hamdeok, Sehwa, Pyoseon, Jungmun, and Hwasun areas along the coast of the Cheju Island. Average mean sizes of the beach sediments are Hyupjae 2.2ø, Aeweol 0.8ø, Iho 1.4ø, Samyang 2.4ø, Hamdeok 1.6ø, Sehwa 1.5ø, Pyoseon 2.1ø, Jungmun 0.4ø, and Hwasun 0.9ø, thus, aries from 0.4 to 2.4ø. The beach sediments from Pyoseon and Hwasun areas are poorly sorted, those from Aeweol and Jungmun areas are moderately sorted and those from the rest of the areas are moderately well sorted. While-colored beach sediments in Hyupjae, Aeweol, Hamdeok, Sehwa, and Pyoseon areas are mostly composed of calcareous shells (more than 85%) such as mollusk, red algae, benthic foraminiferas, etc., whereas volcanic rock fragment is the dominant component of the black-colored beach sediments in Iho, Samyang, and Hwasun areas. Especially, the relatively white-colored beach sediment in Jungmun area, which is on e of the carbonate-dominant areas, shows a higher content of rock fragments than the other carbonate-dominant areas. The beach sediments in Pyoseon area show a high content of carbonate intercalates. Considering the contributions by organisms according to grain size, grains with the size range of 1∼2ø are mostly composed of calcareous red algae fragments, and grains with the size range of 2∼3ø consist of mollusk fragments. It is also notable that bryozoan fragments comprise about 48% of the sediment in Samyang area with the size range of 0∼1ø. The composition of the beach sediments in Cheju Island appears o be controlled by the riverine supply rate of volcanic rock fragments, the lithology of the rocks distributed ear the beaches, the direction of alongshore currents, and the direction of storms, etc.. It is suggested that the beach sediments in Iho and Samyang areas show black color because of the higher supply rate of the volcanic rock fragments from the nearby rivers, whereas those in the rest of the areas show white color due to the relatively lower content of volcanic rock fragments and higher content of carbonate components transported from shallow marine environment. In Hwasun area, the content of volcanic rock fragments is high, and they are directly from the tuffaceous rocks distributed nearby. Also, the volcanic rock fragments in Jungmun area are transported not only from the rivers nearby but also from the nearby tuffs by storm activities. The beach sediment in Pyoseon area contains a high content of carbonate intercalates, which formed in the nearby shallow marine environment through marine cementation. This indicates that active marine cementation occurs in shallow marine environment near Pyoseon area.

• Journal of the Korean Society of Radiology
• /
• v.11 no.7
• /
• pp.547-553
• /
• 2017

In the current medical field, lead is widely used as a radiation shield. However, the lead weight is very heavy, so wearing protective clothing such as apron is difficult to wear for long periods of time and there is a problem with the danger of lethal toxicity in humans. Recently, many studies have been conducted to develop substitute materials of lead to resolve these problems. As a substitute materials for lead, barium(Ba) and iodine(I) have excellent shielding ability. But, It has characteristics emitting characteristic X-rays from the energy area near 30 keV. For patients or radiation workers, shielding materials is often made into contact with the human body. Therefore, the characteristic X-rays generated by the shielding material are directly exposured in the human body, which increases the risk of increasing radiation absorbed dose. In this study, we have developed the FLUKA transport code, one of the most suitable elements of radiation transport codes, to remove the characteristic X-rays generated by barium or iodine. We have verified the reliability of the shielding fraction of the structure of the structure shielding by comparing with the MCPDX simulations conducted as a prior study. Using the MCNPX and FLUKA, the double layer shielding structures with the various thickness combination consisting of barium sulphate ($BaSO_4$) and bismuth oxide($Bi_2O_3$) are designed. The accuracy of the type shown in IEC 61331-1 was geometrically identical to the simulation. In addition, the transmission spectrum and absorbed dose of the shielding material for the successive x-rays of 120 kVp spectra were compared with lead. In results, $0.3mm-BaSO_4/0.3mm-Bi_2O_3$ and $0.1mm-BaSO_4/0.5mm-Bi_2O_3$ structures have been absorbed in both 33 keV and 37 keV characteristic X-rays. In addition, for high-energy X-rays greater than 90 keV, the shielding efficiency was shown close to lead. Also, the transport code of the FLUKA's photon transport code was showed cut-off on low-energy X-rays(below 33keV) and is limited to computerized X-rays of the low-energy X-rays. But, In high-energy areas above 40 keV, the relative error with MCNPX was found to be highly reliable within 6 %.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.11 no.2
• /
• pp.179-186
• /
• 2008

Purpose: Feeding problems are common for typically developing children and have negative effects on physical, behavioral, and cognitive development. The purpose of the current study was to examine factors related to childhood feeding problems for typically developing children via parental reports. Methods: The feeding questionnaire developed by the authors and the Childhood Eating Behavior Inventory (CEBI) were administered to 796 parents of children who recruited from 2 pediatric outpatient clinics (n=379) and community (n=417). Problem eaters (PE) were identified by parental report and frequency analysis was conducted for types of feeding problems and its severity, problem behaviors during mealtime, the feeding methods of the parents, and the need for treatment. Results: The CEBI scores were significantly different between the PE and non-problem eaters (NPE), which suggests that the parental reports were reliable. The younger children had more feeding problems than the older children. The most frequent and severe feeding problems were selective eating and longer mealtimes across all age groups. One-half of the children had more than one problem behaviors during mealtime. Most parents of PE used ineffective methods to deal with children's behaviors during meal time, such as cajoling, which was related to their increased level of stress. Many parents reported their children need professional help for the feeding problems. Conclusion: Feeding problems are prevalent among children, especially younger children. Children with feeding problems showed a number of problem behaviors during mealtime and parental coping methods appeared to be ineffective. The need for treatment was considerable, thus the characteristics of this population must be acknowledged for providing proper treatment and advice.

• Pediatric Infection and Vaccine
• /
• v.23 no.3
• /
• pp.180-187
• /
• 2016

Purpose: This study described the post-exposure prophylaxis (PEP) and secondary varicella infection in children inadvertently exposed to varicella zoster virus (VZV) in the hospital. Methods: We retrospectively analyzed data from patients with VZV infection who were initially not properly isolated, as well as children exposed to VZV at the Seoul National University Children's Hospital between January 2010 and December 2015. The PEP measures were determined by the presence of immunity to VZV and immunocompromising conditions. Patient clinical information was reviewed via medical records. Results: Among 147 children hospitalized between 2010 and 2015, 13 inadvertent exposures were notified due to VZV infection. Five index children had a history of VZV vaccination. Eighty-six children were exposed in multi-occupancy rooms and 62.8% (54/86) were immune to VZV. The PEP measures administered to 27 exposed patients included varicella zoster immunoglobulin and VZV vaccination. Four children developed secondary varicella, which was linked to a single index patient, including one child who did not receive PEP and three of the 27 children who received PEP. The rates of secondary varicella and prophylaxis failure were 4.7% (4/85) and 11.1% (3/27), respectively. The secondary varicella rates were 1.9% (1/54) and 9.7% (3/31) among immunocompetent and immunocompromised children, respectively. Conclusions: Delayed diagnosis of VZV infection can lead to unexpected exposure and place susceptible children and immunocompromised patients at risk for developing varicella. The appropriateness of the current PEP strategy based on VZV immunity may require re-evaluation.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.249-261
• /
• 2020

Coastal monitoring using multiple platforms/sensors is a very important tools for accurately understanding the changes in offshore marine environment and disaster with high temporal and spatial resolutions. However, integrated observation studies using multiple platforms and sensors are insufficient, and none of them have been evaluated for efficiency and limitation of convergence. In this study, we aimed to suggest an integrated observation method with multi-remote sensing platform and sensors, and to diagnose the utility and limitation. Integrated in situ surveys were conducted using Rhodamine WT fluorescent dye to simulate various marine disasters. In September 2019, the distribution and movement of RWT dye patches were detected using satellite (Kompsat-2/3/3A, Landsat-8 OLI, Sentinel-3 OLCI and GOCI), unmanned aircraft (Mavic 2 pro and Inspire 2), and manned aircraft platforms after injecting fluorescent dye into the waters of the South Sea-Yeosu Sea. The initial patch size of the RWT dye was 2,600 ㎡ and spread to 62,000 ㎡ about 138 minutes later. The RWT patches gradually moved southwestward from the point where they were first released,similar to the pattern of tidal current flowing southwest as the tides gradually decreased. Unmanned Aerial Vehicles (UAVs) image showed highest resolution in terms of spatial and time resolution, but the coverage area was the narrowest. In the case of satellite images, the coverage area was wide, but there were some limitations compared to other platforms in terms of operability due to the long cycle of revisiting. For Sentinel-3 OLCI and GOCI, the spectral resolution and signal-to-noise ratio (SNR) were the highest, but small fluorescent dye detection was limited in terms of spatial resolution. In the case of hyperspectral sensor mounted on manned aircraft, the spectral resolution was the highest, but this was also somewhat limited in terms of operability. From this simulation approach, multi-platform integrated observation was able to confirm that time,space and spectral resolution could be significantly improved. In the future, if this study results are linked to coastal numerical models, it will be possible to predict the transport and diffusion of contaminants, and it is expected that it can contribute to improving model accuracy by using them as input and verification data of the numerical models.

• Korean Journal of Weed Science
• /
• v.30 no.4
• /
• pp.340-360
• /
• 2010

The depletion of fossil fuels, ecological problems associated with $CO_2$ emissions climate change, growing world population, and future energy supplies are forcing the development of alternative resources for energy (heat and electricity), transport fuels and chemicals: the replacement of fossil resources with $CO_2$ neutral biomass. Several options exist to cover energy supplies of the future, including solar, wind, and water power; however, chemical carbon source can get from biomass only. When used in combination with environmental friend production and processing technology, the use of biomass can be seen as a sustainable alternative to conventional chemical feedstocks. The biorefinery concept is analogous to today's petroleum refinery, which produce multiple fuels and chemical products from petroleum. A biorefinery is a facility that integrates biomass conversion processes and equipment to produce fuels, power, and value-added chemicals from biomass. Biorefinery is the co-production of a spectrum of bio-based products (food, feed, materials, and chemicals) and energy (fuels, power, and heat) from biomass [definition IEA Bioenergy Task 42]. By producing multiple products, a biorefinery takes advantage of the various components in biomass and their intermediates therefore maximizing the value derived from the biomass feedstocks. A biorefinery could, for example, produce one or several low-volume, but high-value, chemical or nutraceutical products and a low-value, but high-volume liquid transportation fuel such as biodiesel or bioethanol. Future biorefinery may play a major role in producing chemicals and materials as a bridge between agriculture and chemistry that are traditionally produced from petroleum. Industrial biotechnology is expected to significantly complement or replace the current petroleum-based industry and to play an important role.

• Journal of Chest Surgery
• /
• v.39 no.6 s.263
• /
• pp.427-433
• /
• 2006

Background: Current vascular prostheses are considered still inadequate for reconstruction of small-diameter vessels. To evaluate the potential use of xenograft vessels as small diameter arterial grafts, we implanted porcine vessels in goats. The grafts were treated with two different processes, freezing and acellularization, before implantation, and gross inspection as well as microscopic examination followed after a predetermined period. Material and Method: Bilateral porcine carotid arteries were harvested and immediately stored at $-70^{\circ}C$ within tissue preservation solution. One of them was designated as frozen xenograft vessel. The other one was put on acellularization process using NaCl-SDS solution and stored frozen until further use. Grafts were implanted in the place of carotid arteries of the same goat. The grafts have remained implanted for 1, 3, and 6 months in three animals, respectively. Periodic ultrasonographic examinations were performed during the observation period. After explantation, the grafts were analyzed grossly and histologically under light microscope. Result: All animals survived the experimental procedure without problems. Ultrasonographic examinations showed excellent patency of all the grafts during the observation period. Gross examination revealed nonthrombotic, patent lumens with smooth surfaces. Microscopic examinations of the explanted grafts showed cellular reconstruction at the 6-month stage in both grafts. Although more inflammatory responses were observed in the early phase of frozen xenografts, there was no evidence of significant rejection. Conclusion: These findings suggest that porcine xenograft vessels, regardless of pre-implantation processes of acelluarization or freezing, can be acceptably implanted in goats, although short duration of observation in a small number of animals may limit this study.

• Journal of forensic and investigative science
• /
• v.2 no.1
• /
• pp.5-22
• /
• 2007

From the numerous social problems generated by the unbalanced social development and the social trend of belittling life overall, we found the causes of suicide getting worse in its seriousness day by day. In reality, the problem has been approached in a collateral level in contrast with other social problems. There have been an active involvement in studying the definition, causes and ways of prevention of suicide theoretically until now. However, different from other social problems, it is almost impossible to treat or fix the problem of suicide. Only ways to treat or fix the problem is when the suicide has ended in failure. Thus, this study intends to examine the suicide rate among the total accidents during the year 2005, perform the analyses on the actual causes according to the relations such as the means of suicide, occupation, age group, educational background, etc. In order to present a solution to the issue of suicide becoming serious each day. Among the total accidents in 2005, the suicide rate came out to be approximately 52.4%. Among the result, 52.4%, male with 69% resulted higher than female with 31%, which appears to be related to the social functions. While men tends to take more active(80%) means of suicide like jumping off, poison, hanging, etc., women tends to take more passive(60%) means of suicide like sleeping pills, slitting wrist, etc. In terms of the cause, pessimism, illness, denial, mental disorder, etc resulted more than 75%, and there were many cases of suicide after exhibiting the signs of depression. Also there were higher suicide rate of the unemployed engaged in direct labor with educational background lower than college level related to the pessimism regarding the family living cost. We were able to determine the recent increase in the suicidal tendency of the educated people higher than the college level and the retired people with depression caused by the sudden change in social status. Overall there are several reasons for suicide, however, in most cases the signs of depression were exhibited until the final suicide, which tells us the serious psychological problem of suicide. Assuming that the current development of suicide will continue in future, the result of this study will guide the corresponding social policies, be utilized in preparing the insurance or management at the national level dealing with the real social problems that are not just a conflict of an individual, but could spread like a fad and become much bigger than the present by the continuous support at the environmental, social and political levels, and be utilized as the basic data to establish the research plan.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.87-97
• /
• 2016

This work proposes a time-shared 10b DAC based on a two-step resistor string to minimize the effective area of a DAC channel for driving each AMOLED display column. The proposed DAC shows a lower effective DAC area per unit column driver and a faster conversion speed than the conventional DACs by employing a time-shared DEMUX and a ROM-based two-step decoder of 6b and 4b in the first and second resistor string. In the second-stage 4b floating resistor string, a simple current source rather than a unity-gain buffer decreases the loading effect and chip area of a DAC channel and eliminates offset mismatch between channels caused by buffer amplifiers. The proposed 1-to-24 DEMUX enables a single DAC channel to drive 24 columns sequentially with a single-phase clock and a 5b binary counter. A 0.9pF sampling capacitor and a small-sized source follower in the input stage of each column-driving buffer amplifier decrease the effect due to channel charge injection and improve the output settling accuracy of the buffer amplifier while using the top-plate sampling scheme in the proposed DAC. The proposed DAC in a $0.18{\mu}m$ CMOS shows a signal settling time of 62.5ns during code transitions from '$000_{16}$' to '$3FF_{16}$'. The prototype DAC occupies a unit channel area of $0.058mm^2$ and an effective unit channel area of $0.002mm^2$ while consuming 6.08mW with analog and digital power supplies of 3.3V and 1.8V, respectively.