• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.105-106
• /
• 2007

A slot antenna with bazooka balun is designed and implemented for PCS repeater. The proposed antenna improved the return loss and radiation pattern of the slot antenna as combining with the bazooka balun. The antenna was designed by using 3D simulations program, MWS (Microwave Studio). The test result of the slot antenna shows that the return loss is under -10 [dB] for all frequency bands of interests in PCS and maximum gain is about 5.59 [dBi]. And the antenna also shows omni-directional radiation pattern.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1416-1426
• /
• 2008

In this paper, we present a small size and multiband directional dipole antenna for mobile communication repeaters. In the omni-directional dipole antenna, a planar reflector under the dipole provides improved directivity in front-direction with wide beamwidth. In order to miniaturize the directive dipole, the size of the reflector is reduced. A vertical stub on the reflector is proposed to enhance the front-directivity of the radiation pattern and mitigate the backward radiation due to the reduced reflector. Furthermore, we use horizontal stubs on edge of vertical stub to obtain additional reduction of the antenna size. To meet the current demand of wireless communication service, the designed antenna shows wideband characteristic by employing electromagnetic coupled two-dipoles with dual-resonance frequencies.

• Journal of information and communication convergence engineering
• /
• v.8 no.5
• /
• pp.489-492
• /
• 2010

This paper proposes the planar-type modified monopole antennas of loop structure. This antenna has an opened center of a conventional closed loop structure with an inside-folded terminal of the loop microstrip line. The size of the proposed antenna was minimized by folding the end of the loop. Also, the reactance value has been minimized by increasing capacitances between the coupled microstrip line. Therefore the proposed antenna has been compacted to about 20% from a conventional loop antenna and has increased its efficiency. The proposed antennas have an omni-directional pattern, the antenna gain was 3.67 [dBi] and the bandwidth was 900 MHz (2.6~3.56 GHz) with VSWR$\leq$2 from the simulated and the measured results. The frequency utilization coefficient was 29.9%. These properties could satisfy the S-DMB band.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.635-639
• /
• 2010

A multi-resonance antenna for wireless communications is reported. By using double inverted-L strips, the antenna demonstrated compact size (15 mm ${\times}$ 14 mm) including the ground, multi-band operation for IEEE 802.11 a/b/g/p applications, and wide bandwidth of 1.7 GHz at 5 GHz band. Good radiation features of omni-directional patterns and 1.98 and 2.29 dBi peak antenna gains for the lower and upper bands, respectively, have been achieved.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1127-1133
• /
• 2003

In this paper, we proposed a novel folded multi-strip monopole antenna whose height is reduced using folded strip structure. It has a broadband characteristic and its measured impedance bandwidth ratio is approximately 1.85 : 1, from 4.55 GHz to 8.4 GHz, for VSWR$\leq$2. Proposed antenna has vertically polarized omni-directional conical beam radiation pattern. It maintains about the same radiation pattern over entire bandwidth.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.193-196
• /
• 2004

This paper have a whole azimuth Omni-directional radiation pattern and will become the good radiation efficiency for applies in the steeve antenna and form which is the appearance. We contain by whole course of actual implement model to antenna design. And we will confirm the efficiency the analysis of the antenna to design and through a simulated experiment according to the implementation Ideal characteristic of the antenna to be used between 3.1 and 10.6 GHz of UWB.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.21-25
• /
• 2015

A miniaturized triple-band antenna suitable for wireless USB dongle applications is proposed and investigated in this paper. The presented antenna, simply consisting of a circular-arc-shaped stub, an L-shaped stub, a microstrip feed line, and a rectangular ground plane has a compact size of $16mm{\times}38.5mm$ and is capable of generating three separate resonant modes with very good impedance matching. The measurement results show that the antenna has several impedance bandwidths for S11 ${\leq}$ -10 dB of 260 MHz (2.24 GHz to 2.5 GHz), 320 MHz (3.4 GHz to 3.72 GHz), and 990 MHz (5.1 GHz to 6.09 GHz), which can be applied to both 2.4/5.2/5.8 GHz WLAN bands and 3.5/5.5 GHz WiMAX bands. Moreover, nearly-omni-directional radiation patterns and stable gain across the operating bands can be obtained.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.958-964
• /
• 2001

In this paper, we propose a novel wide band printed monopole antenna called the staircase bow-tie monopole antenna (SBMA). We apply an extraordinary method for an impedance matching to conventional bow-tie monopoles. So we get the SBMA with a very wide band. Our antenna is smaller than a quarter wavelength in size but provides a 2:1 VSWR bandwidth of about 77.1 %. An antenna gain and a radiation pattern are about 1.7 dBi and omni-directional at 1.7 GHz, respectively.

• Journal of electromagnetic engineering and science
• /
• v.10 no.2
• /
• pp.67-72
• /
• 2010

A new type of monopole antenna whit broadband characteristics is presented in this article. To reduce the size of the antenna, its upper part is folded. By separating the current flow, the resonance in the shorter part is in the higher band; and the longer part resonates in the lower band. This gives the broadband characteristics of the antenna. Slots on the corner using an oblique line improve the impedance matching and bandwidth. The measurement results show that the bandwidth operates from 0.848~0.992 GHz and 1.744~2.528 GHz, and the radiation patterns are in an omni-directional shape.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.237-240
• /
• 2002

In this paper, we designed and implemented the dual band antenna for IMT-2000 and 5.7㎓ WLAN(Wireless Local Area Network). The antenna was designed by using 3D simulations program, HFSS(High Frequency Structure Simulator). The electrical characteristics were measured by using HP 8720C network analyzer and measured maximum S$\sub$11/ was -25㏈, and maximum VSWR(Voltage Standing Wavc Ratio) was 1.26 for all frequency bands of interests in IMT-2000 and 5.7㎓ WLAN. Simulation results for antenna gain at 2㎓ and 5.7㎓ were 1.31㏈i and 4.1㏈i with omni directional radiation pattern. Implemented antenna is compact sized and can be produced in low cost enough for commercialization.