• Structural Monitoring and Maintenance
• /
• 제10권2호
• /
• pp.117-132
• /
• 2023

The most prevalent and oldest type of structure is unreinforced masonry (URM) structures; URM walls are still a widely used construction material in India and many other developing countries due to their simplicity, ease of construction, economic sustainability, and ability to be built with locally available materials. URM walls are significantly weak while carrying lateral loads. The poor performance of URM walls during earthquakes has necessitated investigating an effective method for strengthening a newly built masonry building or retrofitting an old structure. Wire mesh, being cost-effective and easily available, satisfies the requirements to strengthen new and old URM buildings. The use of wire mesh to strengthen and retrofit the URM structure is simple to use, quick to construct, and inexpensive, especially in developing nations where heavy machinery and highly qualified labour are lacking. The current paper reviews the effectiveness of steel wire mesh as a reinforcing material for enhancing masonry strength. The finding gave encouraging results for the field application of wire mesh.

• 한국터널지하공간학회 논문집
• /
• 제3권3호
• /
• pp.3-13
• /
• 2001

본 연구에서는 재래식 철도터널의 라이닝재로 사용된 조적식 구조물의 해석기법에 대하여 논의하였다. 이를 위하여 기존의 조적식 구조물 모형화 과정과는 다르게 다층 조적조에 대한 해석기법을 제안하였으며 조적의 각종 비등방 물성을 도표화하여 현장에서 손쉽게 적용가능하도록 하였다. 조적조내 균열발생 경우를 고려하여 다층 조적조의 분산형 균열모형을 제안하였으며 균열전파 모형도 함께 고려하였다. 수치해석을 통하여 제안한 모형의 적정성을 검증하였으며 향후 연구방향에 대하여 간단히 언급하였다.

• Smart Structures and Systems
• /
• 제14권3호
• /
• pp.367-376
• /
• 2014

Ambient vibration techniques are nowadays a very popular tool to assess dynamic properties of buildings. Due to its non destructive character, this method is particularly valuable, especially for health monitoring of historical monuments. The present ambient vibration experiment consists on the evaluation of vibration modes of a Medieval tower. Situated in Soncino (close to Cremona, in the Northern Italian region named Lombardia), the tower of 41.5 meters height has been monitored by seismometers located at different points inside the structure. Spectral ratios of the recorded ambient vibrations clearly identify a fundamental mode at about 1 Hz, with a slight difference in the two horizontal components. A second mode is also evidenced at approx 4-5 Hz, with a moderate degree of uncertainty. The records of a ML 4.4 earthquake, occurred during the monitoring period, confirm the information obtained by microtremor analysis. Daily variations of both 1st and 2nd mode were detected: these variations, of an amount up to 2%, seem to be well related with the temperature.

• Steel and Composite Structures
• /
• 제19권2호
• /
• pp.309-325
• /
• 2015

A convenient procedure for seismic retrofit of existing buildings is to use passive control methods, like using friction dampers in steel frames with bracing systems. In this method, reduction of seismic demand and increase of ductility generally improve seismic performance of the structures. Some of its advantages are development of a stable rectangular hysteresis loop and independence on environmental conditions such as temperature and loading rate. In addition to friction dampers, masonry-infill panels improve the seismic resistance of steel structures by increasing lateral strength and stiffness and reducing story drifts. In this study, the effect of masonry-infill panels on seismic performance of a three-span four-story steel frame with Pall friction dampers is investigated. The results show that friction dampers in the steel frame increase the ductility and decrease the drift (to less than 1%). The infill panels fulfill their function during the imposed drift and increase structural strength. It can be concluded that infill panels together with friction dampers, reduced structural dynamic response. These infill panels dissipated input earthquake energy from 4% to 10%, depending on their thickness.

• 한국농촌건축학회논문집
• /
• 제15권3호
• /
• pp.17-24
• /
• 2013

This study examined and investigated architectural characteristics such as the use of buildings, the number of layers, and structure, and roof landscape characteristics such as roof types, materials, and color in rural villages which were located on the street on the assumption that the landscape of rural villages should be managed by considering visual aspects. The results were as follows. The commonest frequency was found in 'residence'(2/3) for the use of buildings and 'masonry structure'(2/3) for the structure. 'Wood structure' and 'light gauge steel structure(prefabricated structure)' were also commonly found. The results suggest that although many rural houses have partially improved by agricultural and fishery development projects and garden suburbs has been increased by city residents' desire for rural life, there have been still many old houses. Frequently used roof types were a gambrel roof and a hipped roof. Roof materials were mixed in several materials such as tiles, slate, panels, color steel plate, reinforced concrete, and asphalt shingles. Roof color was also mixed in several colors such as reddish N7 and N0.5 of Neutral color, 10R3/6 and 10R3/10 of R color, 7.5B4/10 and 7.5B7/8 of B color and 5G8/6 of G color. The result suggests that roof color impedes the landscape of rural villages on the street. Based on the results, some roofs of rural villages were improved by the support of the government or the local governments but there are still many old roofs. The mixture of improved roofs and old roofs mainly contributed to impeding the landscape of rural villages and it was probably caused by the lack of systematic landscape plans by individual improvement of buildings. Therefore, it is necessary to devise systematic landscape plans in consideration of local identity and neighboring environment. In particular, the guideline for roof color influencing a street landscape should be established.

• 한국농촌건축학회논문집
• /
• 제16권1호
• /
• pp.63-70
• /
• 2014

This study is aimed to represent the streetscape in 1960s' focused on Seong-An street of Cheong-ju through the existing business types and buildings, literature, photo details, and interview of the longest-term householders. Results of this study are as follows : Firstly, the types of 1st-floor shops were diverse with general merchandise, apparel, medical, bank, restaurant, and etc in 1960s'. The present shops of them are 'Dong-kwang lasa', 'Jung-geum dang', 'Cheong-ju pharmacy' including the existing 'the Korea development', 'Korea first', and 'Woori' bank. Secondly, the streetscape around post office looks just as it did in the old 1960s'. In the other section the present typical buildings are 'Namseon pharmacy ', 'Kukje department', 'Samyang shop', 'Daeyang shop', 'Park shop', and etc. These old 3-4story buildings are reinforced concrete in contrasted with the former wooden and masonry in structure, and converted in use and appearance. Thirdly, the streetscape of Seong-An is ultimately represented by presuming the other buildings and equipments through aerial and street photograph in the old 1960s'.

• 한국농촌건축학회논문집
• /
• 제24권4호
• /
• pp.59-66
• /
• 2022

This study is to investigate the old buildings that have been built more than 50 years ago, targeting the areas of Seongan and Jungang-dong, the historic urban area of Cheongju. Their types and distribution characteristics are as follows. 1) First, the old buildings existing in downtown Cheongju account for 21.4% of 1,070 out of the total 5,000 buildings. Among them, wooden buildings before the 1950s accounted for 60% of them, resulting in severe aging. 2) Second, by use, 728 detached houses and 276 neighborhood living facilities account for 93.8% of the total, with 16 offices and 12 religious facilities. By structure, there are wood 65%, masonry 30%, and reinforced concrete 5% (54 buildings). By number of floors, the first floor 90%, the second floor 7.3%, and the third floor or higher 2.7% (30 buildings). The roof material is 51.6% of earthenware, followed by slate, cement, and slab. 3) Third, the old buildings are scattered all over the streets, and are concentrated in Namju-dong, Nammun-ro 1-ga-dong, Seoun-dong, and Sudong at the foot of Uamsan Mountain, a former refugee village. Also old buildings are distributed in Seoun-dong and Seokgyo-dong where hanok(korean traditional houses) are concentrated, in Namju and Nammunro 1 ga-dong blocks connected by alleys, and in cul-de-sac all over the place.

• 한국농촌건축학회논문집
• /
• 제16권3호
• /
• pp.27-36
• /
• 2014

The purpose of this study is to provide necessary information for the establishment of remodeling range needed first to support the future remodeling of rural housing. For this, this study examined landscape characteristics of rural housing such as an outer wall, a roof, a fence, and a gate which are main elements of forming the landscape of a rural village and rural residents' perception for remodeling. The results were as follows. The subject rural housing mostly had a timber structure and a masonry structure. Common roof types were a hip-and-gable roof and a gable roof. Frequent materials were a panel, a tile, and slate and common colors were primary colors such as reddish brown, black, and gray. A fence made of cement blocks and finished by a white paint was often found. A closed gate with iron frames was common. A standup kitchen and a flush toilet inside the house were common. The family members of rural residents were mostly two including a farmer husband and his wife. Elderly people of sixty and over were the most common. For residential environment satisfaction, a half of respondents were not unsatisfied with residential environment mostly due to an old house. Most respondents who were not satisfied with residential environment had high perception for the need of remodeling. The most commonly asked remodeling part was a roof, followed by a toilet, and an outer wall, indicating that the need of exterior remodeling was higher than that of interior remodeling. For a remodeling method, a total improvement was preferred. Although some rural village housing was improved by support of the government, local governments, or social groups, there are still many old houses. As this co-existence of improved houses and old houses hinders the landscape of rural village, it is necessary to give a support. But rural residents' requests should be first actively reflected to establish a guideline of supporting rural house remodeling.

• 한국농촌건축학회논문집
• /
• 제17권1호
• /
• pp.113-120
• /
• 2015

In recent years, the population composition of rural area is changing due to the decreasing population growth of the aged with disability and people returning to farming. Since 1970's the rural community facilities have been spreaded out across most rural villages. Although the rural community facilities are the most widely used facilities, the existing facilities are need to be new built or remodeled according to demographic changes, usage of facilities, and environmental condition. Given this reality, the rural community facilities such as village assembly hall and nursing home for senior citizen are not only used for daily life place but also used like co-residence having meals and sleeping together. Therefore the rural community facilities have the potential to become welfare service space for rural elderly people. This research focuses on the current situation of universal design applied community facilities. According to the research, most of the village community facilities were built in the 1990s and 82% of the buildings were more than 15 years old. Furthermore, 45% of the village community facilities more than 15 years old most have a ground floor in masonry structure. The area of the building is 65% less than $100m^2$. The width of the access entrance, the height of the sink, gas safety valve and so forth were relatively well designed. However, the handrail of the entrance, space in front of the toilet bowl, the height difference between the entrance and floor, the installation of the width of the ramp and stair handrail was relatively incomplete. Village community facilities to be built in the future should be universal design fundamentally.

• Smart Structures and Systems
• /
• 제4권2호
• /
• pp.209-220
• /
• 2008

A methodology for the seismic vulnerability assessment of historical monuments is presented in this paper. The ongoing work has been conducted in Tunisia within the framework of the FP6 European Union project (WIND-CHIME) on the use of appropriate modern seismic protective systems in the conservation of Mediterranean historical buildings in earthquake-prone areas. The case study is the five-century-old Zaouia of Sidi Kassem Djilizi, located downtown Tunis, the capital of Tunisia. Ambient vibration tests were conducted on the case study using a number of force-balance accelerometers placed at selected locations. The Enhanced Frequency Domain Decomposition (EFDD) technique was applied to extract the dynamic characteristics of the monument. A 3-D finite element model was developed and updated to obtain reasonable correlation between experimental and numerical modal properties. The set of parameters selected for the updating consists of the modulus of elasticity in each wall element of the finite element model. Seismic vulnerability assessment of the case study was carried out via three-dimensional time-history dynamic analyses of the structure. Dynamic stresses were computed and damage was evaluated according to a masonry specific plane failure criterion. Statistics on the occurrence, location and type of failure provide a general view for the probable damage level and mode. Results indicate a high vulnerability that confirms the need for intervention and retrofit.