• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.1
• /
• pp.102-105
• /
• 2002

Seventy-two crossbred pigs weighing an average of 41.5 kg were assigned on the basis of sex, weight and litter to one of four dietary treatments in a factorial (4 treatments${\times}$2 sexes) arrangement. The control diet was based on barley and soybean meal while the experimental treatments consisted of diets in which a portion of the dietary protein was supplied by 20% of a 50:50 blend of extruded ($130^{\circ}C$ for 20 to 25 sec) peas and full-fat canola seed, 20% of a 50:50 blend of unextruded peas and full-fat canola seed or a diet containing 10% peas, 6% canola meal and 4% canola oil (to equal the level of canola oil provided by 10% whole canola seed). Digestibility coefficients for dry matter, crude protein and gross energy were significantly higher (p<0.05) for the control diet than for the other three diets. Extrusion produced no beneficial effects (p>0.05) on nutrient digestibility and there were no differences in digestibility between the diet based on intact canola seed compared with the diet containing canola meal and oil. Choice of protein supplement had no significant effects on gain, feed intake or feed conversion during the grower or finisher phases and over the entire experimental period. Extrusion of the pea-canola blend produced no beneficial effects on pig performance as the performance of pigs fed either the extruded or unextruded blend of peas and canola seed was similar. In addition, the performance of pigs fed diets containing intact canola seed was similar to that of pigs fed canola meal and oil. Castrates gained faster and consumed more feed than gilts (p<0.05). However, their feed conversion was poorer than that of the gilts during the finisher period. There were no significant differences in carcass traits between pigs fed the control and any of the experimental treatments. Extrusion had no effect on carcass traits and the carcasses of pigs fed canola meal and oil did not differ from those of pigs fed whole canola seed. Castrates had a significantly lower dressing percentage, lower estimated lean yield but greater loin fat depth than gilts (p<0.05). The results of this experiment indicate that peas in combination with canola seed or canola meal are an acceptable alternative to soybean meal as a protein supplement for use in growing-finishing swine diets. Extrusion did not appear to have any beneficial effects on the nutritional value of the canola seed-pea blend as nutrient digestibility, growth performance and carcass traits were similar for pigs fed the unextruded blend of peas and canola seed compared with the extruded product. Since the process adds to the cost of the raw products, its use is unlikely to be economical.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.9
• /
• pp.1374-1388
• /
• 2007

Three experiments were conducted to investigate the hypothesis that cows grazing on pasture produce the highest proportion of c-9 t-11 CLA in milk fat and no further increase can be achieved through supplementation of diets rich in linoleic acid, such as full-fat extruded soybeans or soybean oil. In experiment 1, 18 lactating Holstein cows were used in a randomized complete block design with measurements made from wk 4 to 6 of the experiment. In experiment 2, three cannulated lactating Holstein cows were used in a $3{\times}3$ Latin square design. Each period was 4 wk with measurements made in the final wk of each period. Cows in both experiments were assigned at random to treatments: a, conventional total mixed ration (TMR); b, pasture (PS); or c, PS supplemented with 2.5 kg/cow per day of full-fat extruded soybeans (PES). In both experiments, feed intake, milk yield, milk composition, and fatty acid profile of milk and blood serum were measured, along with fatty acid composition of bacteria harvested from rumen digesta in experiment 2. In experiment 3, 10 cows which had continuously grazed a pasture for six weeks were assigned to two groups, with one group (n = 5) on pasture diet alone (PS) and the other group (n = 5) supplemented with 452 g of soy oil/cow per day for 7 d (OIL). In experiment 1, cows in PS treatment produced 350% more c-9, t-11 CLA compared with cows in TMR treatment (1.70 vs. 0.5% of fat), with no further increase for cows in PES treatment (1.50% of fat). Serum c-9, t-11 CLA increased by 233% in PS treatment compared with TMR treatment (0.21 vs. 0.09% of fat) with no further increase for cows in PES treatment (0.18% of fat). In experiment 2, cows in PS treatment produced 300% more c-9 t-11 CLA in their milk fat compared with cows in TMR treatment (1.77 vs. 0.59% of fat), but no further increase for cows in PES treatment (1.84% of fat) was observed. Serum c-9, t-11 CLA increased by 250% for cows in PS treatment compared with cows in TMR treatment (0.27 vs. 0.11% of fat), with no further increase for cows in PES treatment (0.31% of fat). The c-9, t-11 CLA content of ruminal bacteria for cows in PS treatment was 200% or more of TMR treatment, but no further increase in bacterial c-9, t-11 CLA for cows in PES treatment was observed. Supplementation of soy oil in experiment 3 also did not increase the c-9 t-11 CLA content of milk fat compared with cows fed a full pasture diet (1.60 vs. 1.54% of fat). Based on these findings, it was concluded that supplementing with feeds rich in linoleic acid, such as full-fat extruded soybeans or an equivalent amount of soy oil, to cows grazing perennial ryegrass pasture may not increase milk fat c-9 t-11 CLA contents.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.676-685
• /
• 2016

This study investigated the conversion of oil products from polystyrene by using dispersed Co and Mo catalyst on reaction time and concentration change for knowledging on characteristics at low temperature (425, 450 and $475^{\circ}C$) pyrolysis and reaction time(20~80 min, 15 min interval) in a batch reactor. It will be showed the conditions for optimum pyrolysis at reaction temperature $450^{\circ}C$ and the reaction time 35min, and the main components of the converted liquid oil were styrene and benzene derivatives by GC/MS. The oil products formed during pyrolysis were classified into gas, gasoline, kero, diesel and heavy oil according to the domestic specification of petroleum products. The pyrolysis conversion rate was showed as Co catalyst > Mo catalyst > Thermal in all reaction time at reaction temperature $450^{\circ}C$. The yields rate of gas, kerosine, diesel were the most hight at Mo Catalyst, gasoline was at thermal and heavy oil was at Co catalyst. The conversion rate and yields of the pyrolysis products were the most height when Co catalyst ratio was 100%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.1
• /
• pp.7-11
• /
• 1999

This experiment was conducted to investigate the effects of soil conditioners, such as lime, borax, poultry waste sawdust manure (P.W.S.M) and mixed oil cakes (M.O.C), on the rutin biosynthesis and the yield of buckwheat. The content of phosphorus ($P_2O_5$) in buckwheat plants before flowering was higher at before flowering than that of flowering time at all plots. The content of nitrogen (N), potassium ($K_2O$), calcium (CaO) and magnesium (MgO) was lower at before flowering than those of flowering time at all plots. The contents of rutin in buckwheat plant at flowering time was higher than that at before flowering content of rutin in leaf was higher than that in stem. The contents of rutin in buckwheat plant was the highest at the plot treated with borax (B) compared to other plots. Correlation between rutin and amino acid was positive in buckwheat leaf, while it was negative in buckwheat stem. The yield of buckwheat was 21 percent higher at the plot treated with borax than the plot applied with the other three ingredients.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.403-407
• /
• 2005

Pyrolysis of methyl ricinoleate, from castor oil, was performed to produce methyl undecenoate. Methyl undecenoate has excellent deodorant, bactericidal and fungicidal activity. The object of this study was to find the optimum temperatures to maximize the yield of methyl undecenoate. The optimum temperatures were at $500^{\circ}C$ and $590^{\circ}C$ for preheating and pyrolysis, respectively. The maximum yield was 46% on the basis of injected methyl ricinoleate. The feeding rate of methyl ricinoleate mixture was selected as the scale-up factor. Maintaining the maximium yield, the feeding rate was scaled-up 20 folds, while the reactor was scaled-up 18 times.

• Resources Recycling
• /
• v.7 no.1
• /
• pp.50-56
• /
• 1998

Basic oxygen furnace @OF) slag. a by-pradud of thc iron and steelmaking industry produced in largc quantities in Korea, poszs a subslantial disposal challenge. The BOF slag used in this study was if3 CaCO, in total n e u ~ ~ pnowger and application of 7-8 Mgha' was needed to bring soil pH to 6.5 horn pH 5.0-5.5 m silly clay or clay loam sod wnlained about 10% orgaoic matter. A field assay was conducted to shldg whether BOP slag could bc used as a dolomitic k i n g agent for agricullural soils. Four slag rates (0, 4, 8, 12 Mgha-')were investigated for their effcfect on soil pmperti~, mineral concentralions in leaf tissues of rice and soybean, and yield of the crops. Slag application at 8 Mgha-' rate in paddy field increased pH, Ca Mg, P, Si and Fe wntenl in sail and rice yield by 4.3-14.25 depending an the soil type. h upland field the 8 Mghaf ratc increa3ed pH, Ca and Fe wntent m soil and soybean yield by 36.6%. Thus, BOF slag appears to be a useful liming mate&\ulcornerl for corrzch~gs oil acidity on both paddy and upland ficld soils and for innwing Ca, Mg, P, Si, and Fe wncenhation in plants.

• Journal of Industrial Technology
• /
• v.9
• /
• pp.29-41
• /
• 1989

A general study on the upgrading of mica minerals which are mainly found in pegmatite deposits was carried out for the purpose of developing a technique for recovering mica in form of comercial grade products. By the way the grade one of about 5~6% $K_2O$ still is not developed. The target of this research work is to be establish a process for the efficient concentration of muscovite, containing more than 10% $K_2O$. The tests are applied to incraese the recovery and grade of concentrates in term of variations of conditions. The test sample consists of mainly muscovite and gangue mineral such as quartz, pyrite and chlorite. Decantation and shaking table tests were ineffective to up-grade this low grade one, but flotation method gave satisfactory result. By means of grade one, but flotation method gave satisfactory result. By means of grindability tests, an optimum result could be obtained from the sample ground to -48mesh feed size. The flotation result indicates that the dodecyl ammonium chloride used as a cationic collector is effective on the negatively charged surface, while the sodium dodecyl sulfate as an anionic collector is effective on the positively charged surface. Muscovite was floated by petroleum sulfonate as well as amine type collector, it also floated by MIBC as well as pine oil frother under well condition. Fine muscovite concentrates of about 10.68% $K_2O$ was obtained with 22.4% yield, by decantation, the muscovite concentrates of 10.10% $K_2O$ was obtained with 23.54% yield, by table concentration, the muscovite concentrates of 11.51% $K_2O$ was obtained with 23.0% yield by flotation.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.412-418
• /
• 2023

The surge in the oil prices, increasing global population, climate change, and waste management problems are the major issues which have led to the development of biofuels from lignocellulosic wastes. Cellulosic or second generation (2G) bioethanol is produced from lignocellulosic biomass via pretreatment, hydrolysis, and fermentation. Pretreatment of lignocellulose is of considerable interest due to its influence on the technical, economic and environmental sustainability of cellulosic ethanol production. In this study, furniture waste sawdust was subjected to alkaline peroxide (H₂O₂) for the production of reducing sugars. Sawdust was pretreated at different concentrations from 1-3% H₂O₂ (v/v) loadings at a pH of 11.5 for a residence time of 15-240 min at 50, 75 and 90 ℃. Optimum pretreatment conditions, such as time of reaction, operating temperature, and concentration of H₂O₂, were varied and evaluated on the basis of the amount of total reducing sugars produced. It was found that the changes in the amount of lignin directly affected the yield of reducing sugars. A maximum of 50% reduction in the lignin composition was obtained, which yielded a maximum of 75.3% total reducing sugars yield and 3.76 g/L of glucose. At optimum pretreatment conditions of 2% H₂O₂ loading at 75 ℃ for 150 min, 3.46 g/L glucose concentration with a 69.26% total reducing sugars yield was obtained after 48 hr. of the hydrolysis process. Pretreatment resulted in lowering of crystallinity and distortion of the sawdust after the pretreatment, which was further confirmed by XRD and SEM results.

• Korean Journal of Medicinal Crop Science
• /
• v.8 no.1
• /
• pp.64-68
• /
• 2000

This study was conducted to determine effects of seeding date, method, and amount on the growth and yield in dill (Anethum graveolens L.). Dill was seeded at six different dates (from Feb. 15 to May 16 at 15 days interval) and two seeding methods (drilling and broadcasting). Required days to emergence, days to flowering and days to maturity were decreased as seeding date was late. In growth characteristics, plant height was significantly different at different seeding times, and lodging affect plant growth in the case of Feb. 15 and Mar. 2 seeding. Essential oil contents was not affected by different seeding times except Feb. 15. Seed yield was different at different seeding times. In seeding method tests, yield was increased by 14% in drill seeding compared with those in broadcast seeding. Regarding the amount of seeding, the yield from the plot of 3 l /10a was increased more 24% than 1 l/10a plot. As a result, this study suggest that dill have to be seeded before April 1 with drill seeding method and the optimum seeding amount appeared to be 3 l/10a.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.2
• /
• pp.169-173
• /
• 1988

In order to find out the optimum seeding date of flax. this study was investigated ecological characters, yield components and yield of five varieties(Wiera, Taijungsun ＃$^1$, Storment Goss, CI 1763, 99403-Fiber). As seeding date was delayed, the maturing date was delayed also and stem length was longest in March 10 seeding but it grew short in the late seeding. Oil content was increased most in March 10 seeding, that is, increased to 34% in Taijungsun ＃$^1$, 32% in storment Goss, 30% in Wiera and 26% in 99403-Fiber, and it was decreased in the late seeding. Stem yield and seed yield were heaviest in March 10 seeding, and it was light in the late seeding, Judging from the results reported above. in optimum seeding date of flax seemed to be before the March 10.