• 공업화학
• /
• 제35권1호
• /
• pp.42-47
• /
• 2024

벤튜리를 이용한 진공건조 공정에 의해 폐 감귤박으로부터 리모넨을 분리하고 건조된 감귤박을 이용하여 바이오 에탄올을 생산하였다. 벤튜리를 이용한 진공건조가 열풍건조 및 자연건조에 비해 수분 및 리모넨의 제거에 매우 효과적이었으며, 벤튜리 진공건조에 의해 건조된 감귤박이 에탄올 발효에 가장 적절하였다. 벤튜리 진공건조에 의해 15시간 동안 건조된 감귤박의 수분 및 리모넨 함량은 각각 17.0% 및 3.2%이었다. 벤튜리 진공건조에 의해 리모넨을 함유한 정유와 플로럴 워터를 각각 얻을 수 있었으며, 벤튜리 진공건조에 의해 분리된 정유의 양은 4.21 mL/kg 감귤박이었고, 분리된 정유의 79.9%는 리모넨이었다.

• 대한환경공학회지
• /
• 제22권6호
• /
• pp.1055-1061
• /
• 2000

희분식 반응기에서 폐윤활유를 열분해하였을 때 생성된 오일의 타르생성에 관한 속도연구와 오일의 안정화 연구를 수행하였다. 열분해유에서 타르가 생성되는 과정은 직렬반응과 병렬반응이 결합된 lumped kinetic 모델을 제시하여 실험결과와 비교하였다. 제시된 모델로부터 타르를 생성하는 반응속도 결정단계는 열분해 생성유가 중간반응 단계를 거치지 않고 바로 타르가 되는 경로임을 알 수 있었다. 오일의 안정화를 위해 fly ash와 coke를 첨가하였을 때 타르를 생성하는 물질의 제거 및 산화방지 효과가 큰 것을 확인할 수 있었다.

• 한국분무공학회지
• /
• 제18권4호
• /
• pp.182-187
• /
• 2013

This study was performed to investigate the effect of biodiesel derived from waste cooking oil on the spray behavior and macroscopic spray characteristics. To analyze quantitative characteristics of test fuels, injection quantity was measured at various injection pressures and the spray images of injected fuels in the pressurized chamber were obtained by using a high speed camera and image analysis system. Based on the measured spray images, the spray tip penetration and spray cone angle were investigated at various energizing timings and injection pressures. In this work, the experimental results showed that the injection quantity of waste cooking biodiesel indicated the higher quantities than diesel at high injection pressure. As the injection pressure was increased, the spray tip penetrations of biodiesel were higher value than diesel. The difference of penetration between biodiesel and conventional diesel fuel was reduced in accordance with the increase of injection pressure. Also, the spray angles of diesel were larger than that of biodiesel because diesel fuel has lower viscosity than biodiesel. In addition, the spray evolution processes of biodiesel fuel at various injection pressures and the elapsed time after the injection were compared to the conventional diesel fuel.

• Journal of Microbiology and Biotechnology
• /
• 제22권3호
• /
• pp.371-377
• /
• 2012

The present study describes medium-chain-length polyhydroxyalkanoates (mcl-PHAs) production by the Pseudomonas Gl01 strain isolated from mixed microbial communities utilized for PHAs synthesis. A two-step fed-batch fermentation was conducted with glucose and waste rapeseed oil as the main carbon source for obtaining cell growth and mcl-PHAs accumulation, respectively. The results show that the Pseudomonas Gl01 strain is capable of growing and accumulating mcl-PHAs using a waste oily carbon source. The biomass value reached 3.0 g/l of CDW with 20% of PHAs content within 48 h of cultivation. The polymer was purified from lyophilized cells and analyzed by gas chromatography (GC). The results revealed that the monomeric composition of the obtained polyesters depended on the available substrate. When glucose was used in the growth phase, 3-hydroxyundecanoate and 3-hydroxydodecanoate were found in the polymer composition, whereas in the PHAs-accumulating stage, the Pseudomonas Gl01 strain synthesized mcl-PHAs consisting mainly of 3-hydroxyoctanoate and 3-hydroxydecanoate. The transcriptional analysis using reverse-transcription real-time PCR reaction revealed that the phaC1 gene could be transcribed simultaneously to the phaZ gene.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.437-444
• /
• 2010

Dry Process(natural drying, hot-air drying, oil fry drying), optimized mixture ratio and the condition of carbonization was carried out in order to improve the product durability develop eco-friendly solid fuel mixing food waste and paper sludge. As a result of the experiment, oil fry drying process was the fastest method for drying food waste and paper sludge mixture that contains 80% water inside, and the optimized mixture ratio to minimize the generating concentration of chlorine gas against caloric value of mixture ratio was 7:3. Additionally proper temperature of product carbonization was about $200^{\circ}C$ and shown increasing product durability through the carbonization. Therefore, the pelletized solid fuel be shaped diameter around 0.5cm, length 2cm under which was pulverized and molded using 7:3 mixture of food waste, and paper sludge was the eco-friendly solid fuel possible to be industrialized which is consist of chlorine concentration of below 2.0wt% and the lowest caloric value of over 5,000kcal/kg. In conclusion, this developing manufacturing process of the solid fuel can be interpreted to contribute alternative energy development in accordance with low carbon and green growth era.

• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.31-36
• /
• 2006

Study has been made for producing anionic surfactant using waste fleshing scraps from the leather making process through refining, esterification, sulfonation and blending processes. As a most optimum lard oil refining method, refining was carried out for 4 hours under temperature of $120^{\circ}C$ and approximately 200 mbar vacuum, which gave a recovery of more than 80% lard oil. Refined lard oil obtained thus was undergone methlyl-esterification, then sulfonated to make a degreasing agent. By methyl-esterification using lard oil, more than 85% of fatty acid and $12{\sim}13%$ of glycerine were extracted from the oil. Sulfonation of the extracted fatty acid ester lard oil has shown most optimum at $15{\sim}20%$ chlorosulfonic acid content, and the content of bonding sulfate at this time was higher than 3.5%. Finally the followed anionic surfactant having degreasing force of 80% and higher could be made by blending process.

• 에너지공학
• /
• 제12권3호
• /
• pp.216-222
• /
• 2003

실험실 규모의 진공 증발 수분 제거 시스템을 이용하여, 압력, 윤활유의 온도, 초기 수분농도 및 윤활유 분사 노즐의 형태 등 폐윤활유 속에 포함된 수분 제거 성능에 영향을 미치는 각각의 운전 변수들에 대한 실험적인 연구를 수행하였다. 연구의 결과 압력 및 폐윤활유 온도의 증가는 수분 제거 성능에 매우 중요한 변수임을 확인하였으며, 또한 진공 증발실로 폐윤활유를 분사하기 위한 노즐의 형태는 다공성 매질의 노즐 형상인 경우가 가장 우수한 수분 증발 성능을 나타내었다.

• 환경위생공학
• /
• 제18권3호통권49호
• /
• pp.21-26
• /
• 2003

The generation of waste cable has been continuously increased as a production of electrical and communication media are extended. The current recovery methods, such as mechanical peeling, incineration, solvent extraction and pyrolysis, seems inadequate because they are either hard to apply in some cases or environmentally unacceptable. It has been shown that copper can be effectively separated from the jelly filled type cables using a soybean oil treatment method. As a result, jelly compound is vanished from the wire by soybean oil bath and waste wires are separated copper and PE by the mechanical chipper. This is a more environmentally friendly method than burning, and considerably faster than Stripping.

• 한국산업융합학회 논문집
• /
• 제7권4호
• /
• pp.341-348
• /
• 2004

This study experimented dividing compaction load by dynamic compaction test and an oil pressure hammer compaction test for consolidation strength characteristics experimental feedback about soil change aspect of waste landfill ground and revelation of compaction effect as underground research about consolidation behavior of waste landfill ground by compaction load, foot weight and percussion number of times were adapted differently each other with uniformity drop head when dynamic compaction test, and hammer scale and percussion number of times were adapted differently also when oil pressure hammer compaction test.

• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.577-583
• /
• 2017

A series of microwave waste tire pyrolysis experiments were conducted using a lab-scale batch reactor to delineate the effects of microwave ouput power on the pyrolysis behavior of waste tire. As results of experiments, it was found that as the microwave output power was increased from 1.22 kW/kg to 2.26 kW/kg, the reaction temperature and oil yield increased significantly and the required time and microwave power consumption decreased remarkably, respectively. With increased power consumption, the content of the fixed carbon of pyrolysis residue increased.