• Journal of the Korean Ceramic Society
• /
• v.28 no.2
• /
• pp.146-152
• /
• 1991

Ultra fine and homogeneous (Ni0.4Zn0.6)Fe2O4 ferrite powders were prepared by direct-wet, Hydrothermal and coprecipitation methods. In case that specific surface areas of Ni-Zn ferrite powders were over 220㎡/g, 100㎡/g, 30㎡/g individually direct-wet, hydrothermal and coprecipitation methods. The Ni-Zn ferrite magnetic fluids of which Solvents were benzene or kerosene was prepared by making cation surfactant adsorbed on the surface of the (Ni0.4Zn0.6)Fe2O4. The results that measured dispersion and viscosity by making cation surfactant adsorbed were as follows. 1. The adsorption amount of Oleric acid be proportioned the specific surface area of powders. 2. The maximum amount of Oleric acid was 36wt% of dried powders which has 220㎡/g of specific surface area. 3. The stability of fluid by direct-wet synthesis emthod in benzene or kerosene solvent excellent.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.75-76
• /
• 2017

In this study, it is speculated that the special admixture can be mixed with ERCO beforehand to prevent adsorption of cement and AE at the time of contamination together with water, and the change in the amount of special admixture preliminarily added to ERCO We will try to analyze the influence on normal strength mortar. As a result, the flow quantity, the air quantity, the compressive strength and the flexural strength were improved as the added amount of the special admixture was increased, and When the special admixture with the addition amount of ERCO 3% was added, the strength was rather lowered. Therefore, it was found that the optimum amount of special admixture added to ERCO was 2%.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.282-291
• /
• 2012

The PGLE and PGLE3 nonionic surfactants were synthesized from the reaction between glycidol and lauryl acid and their structures were confirmed by $^1H$ and $^{13}C$ NMR analysis. The CMCs of PGLE and PGLE3 surfactants were found to be $3.59{\times}10^{-2}$ mol/L and $8.80{\times}10^{-2}$ mol/L respectively and the surface tensions at their CMC conditions were 26.09 mN/m and 28.68 mN/m respectively. Dynamic surface tension measurement has shown that the adsorption rate of surfactant molecules at the interface between air and surfactant solution was found to be relatively fast in both surfactant systems, presumably due to high mobility of surfactant molecules. The contact angles of PGLE and PGLE3 nonionic surfactants were $25.5^{\circ}$ and $9.5^{\circ}$ respectively. Dynamic interfacial tension measurement showed that both surfactant systems reached equilibrium in 20 minutes and the interfacial tensions at equilibrium condition in both systems were 0.42 mN/m and 0.53 mN/m respectively. The PGLE surfactant system has indicated higher foam stability than the PGLE3 surfactant system, which is consistent with surface tension measurement. The phase behavior experiments performed at $25{\sim}60^{\circ}C$ in systems containing nonionic surfactant, water, n-hydrocarbon oil and cosurfactant showed a lower phase or oil in water microemulsion in equilibrium with excess oil phase at all conditions investigated during this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.934-940
• /
• 2012

Antioxidant activities such as reducing power, electron donating ability(EDA) and oxidation stability of Rumex crispus extracts with ethanol were examined, and adsorption of Pb(II) and Cd(II) with dried Rumex crispus powder in aqueous solution was experimented. Extraction yields based on the soluble solid contents ranged 1.9% to 3.0%, and were inversely proportional to solvent ratio but proportional to extraction temperature. Reducing power and EDA were also increased with extraction temperature but decreased with solvent ratio. These were corresponded to 86.4% and 91.0% of ascorbic acid reducing power and EDA, respectively, on 20 folds of solvent ratio and $75^{\circ}C$ Oxidation stability of Rumex crispus extracts on the corn seed oil was 86~91.3% of butylated hydroxytoluene. Pb(II) adsorptivity of Rumex crispus was higher than Cd(II), and adsorption rate of Pb(II) was 88% in 20 ppm concentration and 60min.

• Corrosion Science and Technology
• /
• v.22 no.2
• /
• pp.73-89
• /
• 2023

Due to continuous promotion of green alternatives to toxic petrochemicals by government policies, research efforts towards the development of green corrosion inhibitors have intensified recently. The objective of the current work was to develop novel green and sustainable corrosion inhibitors derived from 4-aminoantipyrine to effectively prevent corrosion of mild steel in corrosive environments. Gravimetric methods were used to investigate corrosion inhibition of 4-((furan-2-ylmethylene)amino)antipyrine (FAP) and 4-((pyridin-2-ylmethylene)amino)antipyrine (PAP) for mild steel in 1 M HCl. FAP and PAP were subjected to quantum chemical calculations using density functional theory (DFT). DFT was used to determine the mechanism of mild steel corrosion inhibition using inhibitors tested in HCl. Results demonstrated that these tested inhibitors could effectively inhibit mild steel corrosion in 1.0 M HCl. At 0.0005 M, these inhibitors' efficiencies for FAP and PAP were 93.3% and 96.5%, respectively. The Langmuir adsorption isotherm was obeyed by these inhibitors on the mild steel surface. Values of adsorption free energies, ΔG^o_ads, revealed that FAP followed chemical and physical adsorptions.

• Clean Technology
• /
• v.12 no.1
• /
• pp.37-44
• /
• 2006

The effectiveness of inorganic oxides (DT-30), anionic exchange resin (DT-60) and carbon absorbent (DT-80, DT-90) on the equilibrium and continuous separation characteristics and removal of cobalt, cesium and iodide ion in the waste water was investigated. As a result, DT-30, DT-80 or DT-90, and DT-60 showed excellent separation properties on the cesium, cobalt and iodide respectively. In the equilibrium experiment, the adsorption amount of cesium for DT-30 increased with temperature, but increasd largely with pH. In case of DT-80, adsorption of cobalt was depended on pH but was not influenced by temperature. In the continuous system by passing a heavy metal ion solution through the ion exchange tower, DT-30, DT-90 and DT-60 showed good separation characteristic for cesium, cobalt and iodide respectively. In this case, separation characterization of DT-30 on the cesium and of DT-60 on the iodide were better than that of DT-90 on the cobalt. From the experiment on the effect of impurities on the ion exchange characteristics, impurities such as surfactant and oil did not influence the efficiency of DT-90. In the mean while, ion separation capacity of DT-30 were decreased largely by impurities such as surfactant and oil. Also, surfactant had a strong influence on the effectiveness of DT-60. Accordingly, it turned out to be very important thing that impurities should be removed in the preprocessing stage.

• Korean Journal of Food Science and Technology
• /
• v.52 no.5
• /
• pp.516-523
• /
• 2020

Supercritical carbon dioxide (_SCO2) extraction was applied for the defatting of mealworm to prepare defatted powder (DP) and protein isolate (PI) and compare the process to press and hexane extraction, with respect to DP and PI physicochemical properties. _SCO2 DP was obtained by extracting 34.40% oil at 41.37 MPa, 40℃ for 180 min, and the product contained 71.66% crude protein, which is similar to that of hexane DP and higher than that of press DP. In using alkali protein extraction to prepare PI from DP, _SCO2 was as effective as hexane and better than press. _SCO2 produced brighter DP and PI than press, but not as much as hexane. Protein solubility was similar in all DP, with minimum values at pH 5. The highest water adsorption capacity was noticeable for _SCO2 PI, and _SCO2 DP showed an oil adsorption capacity comparable to that of hexane DP. _SCO2 DP and PI had better foaming capacity than press DP and PI and showed superior emulsion activity compared to others.

• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.249-258
• /
• 2007

In this study, the EPDM powder which was surface activated by high temperature and shear pulverization process was prepared and the mechanical properties and odor material analysis were investigated. Analysis for particle size and size distribution of waste of the EPDM powder has been performed. The waste EPDMs used in this study were 4 types of solid, sponge, solid+sponge, and solid+metal. According to the results, the solid type showed the smallest particle size among the 4 types of EPDM powder. Effective surface devulcanization of EPDM powder could be obtained by the addition of the reclaiming agent. The dicumyl peroxide was considered as the best crosslink agent for dynamic vulcanization when the surface activated EPDM powder was blended with polyolefin in order to make TPE. Also, the optimum amounts of DCP was 6 phr in terms of surface crosslink reaction and mechanical properties of EPDM powder. The processes of water adsorption and rose oil addition were employed to remove the odor of EPDM powder caused by reclaiming agent. The GC/MS was used to analyze the odor compounds.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.3
• /
• pp.404-408
• /
• 1995

The effect of processing conditions on the changes in the contents of dietary fiber fractions and its physical properteis of Godulbaegi(Korean lettuce, Ixeris sonchifolia H.) was determined during preparation and fementation for kimchi. Water holding capacity(WHC) and oil adsorption capacity(OAC) were also checked on the subject of freeze dried powder from different stages of the kimchi processing. Neutral detergent fiber(NDF) content in young samples(leaf and root) decreased with prolonged soaking and fermentation period. Every young samples had a higher level in NDF than in ripe samples. Noticeable decrease in acid detergent fiber(ADF) without a change in ripe roots was showed after fermentation($4^{\circ}C$, 60 days). The water holding capacity of freeze dried young plants ranged from 5.78ml/g for roots to 6.31ml/g for leaves. Soaking and fermentation resulted in decreasing WHC and about 50% of WHC(raw leaves) was lowered after kimchi fermentation($4^{\circ}C$, 40 days). OAC of all samples were lower than WHC in same samples significantly and those were also decreased after soaking and fermentations as WHC.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1394-1398
• /
• 2006

Functionalities of drum-dried fish muscle protein from pH shifting process have been investigated by determining solubility, emulsion activity, rehydration, fat-adsorption capacity, viscosity, and color. Solubility was higher in recovered protein at pH 7.0 than that at pH 5.5, and not dependent on ionic strength. Solubility of the dried protein recovered at pH 7.0 depended on pH of solvent, and lowest in the range of pH 3 to pH 6. The dried protein showed relatively low emulsion capacity in all the samples. Emulsion stability, foam capacity and foam stability were not observed in the samples. Viscosity was in the range of $50,200\sim39,000cP$. Rehydration and fat-binding capacities were $2.63\sim2.89g$-water/g and $2.13\sim2.17g$-oil/g, respectively, and not dependent on particle size and pH. Drum-dried fish muscle protein has a potential application as an ingredient of meat patty products.