• Journal of Advanced Marine Engineering and Technology
• /
• 제40권8호
• /
• pp.686-691
• /
• 2016

This paper employs numerical tools to obtain an optimal thermal design of a heat exchanger with plain-fins. This heat exchanger is located at the condensing section of a crevice-type heat pipe. The plain-fins in the heat exchanger are radically mounted to two tubes in the condensing section. To obtain the optimal design parameters, a computational fluid dynamics technique is introduced and applied to different placement configurations in a system module. Owing to its effects on the heat pipe performance, the temperature difference between the tube surfaces and ambient air is investigated in detail. A greater heat dissipation rate occurs when the plain-fin offsets change from 2 to 3 mm. When this temperature difference is ${\Delta}T=70^{\circ}C$, the upper part of the plain-fins undergoes an accumulation of heat. At below $70^{\circ}C$, the dissipation of heat is accepted. A rectangular plain-fin geometry with varying widths and heights does not have a significant impact on the heat dissipation through-out the overall system. In addition, the temperature distributions between different plain-fin pitches show an equal profile even with different fin pitches.

• 전자공학회논문지
• /
• 제50권8호
• /
• pp.15-20
• /
• 2013

본 논문에서는 UHF (ultra high frequency) 대역에서 협대역 통신 시스템을 설계할 경우 필연적으로 겪게 되는 주파수 옵셋 (offset)의 영향을 감쇄시킬 수 있는 dual-band FSK (frequency shift keying) 변조 방식을 제안한다. 협대역 통신 시스템의 경우 광대역 통신 시스템에 비하여 주파수 옵셋에 의한 성능 열화가 상대적으로 큰 단점이 있으며 이로 인하여 버스트 모드 (burst mode)로 동작하는 협대역 통신 시스템의 경우 신호 검출 및 초기 동기 획득이 용이치 않은 문제가 있다. 본 논문에서 제안하는 dual-band FSK 변복조 방식은 버스트 모드 협대역 통신 시스템에서 초기 주파수 옵셋이 큰 경우에도 안정적으로 동작할 뿐만 아니라 주파수 다이버시티 (frequency diversity)를 얻을 수 있어 통신 시스템의 높은 신뢰도가 요구되는 긴급 통신망 설계 등에 활용될 수 있다.

• 대한조선학회논문집
• /
• 제52권5호
• /
• pp.372-379
• /
• 2015

The blade root fillets which have strong influences on the performance of propellers in the both structural and hydrodynamic points of view, are mechanical parts for smooth connection surface with a blade and a hub. A few related researches (Sabol, 1983; Kennedy, 1997) have noted that 3T-T/3 double radius section design would be suitable for reducing Stress Concentration Factor(SCF) and increasing Cavitation Inception Speed(CIS). In this paper, it is confirmed that this compound cross-section design has come close to the optimum solution in the shape optimization standpoint so that it could protect the propeller blade under the frequent and various loading cases. On that basis, we suggest the definite and simple fillet design methodology that has the cross-section with nT-T/n compound radius and elliptic shape which could sustain the given derivatives information as well as the offsets at the boundary and all inner region of the fillet surface. In addition, the result of design is presented in form of IGES file format in order to connect with NC machine seamlessly.

• 원예과학기술지
• /
• 제30권3호
• /
• pp.342-344
• /
• 2012

A new grafted cactus cultivar, called 'Hwangseon', Gymnocalycium mihanovichii, is a hybrid crossed between two orange color cultivars 'Geoseong' and 'Huhwang'. Mating was performed in the greenhouse of National Institute of Horticultural & Herbal Science (NIHHS) in 2005. The harvested seeds were sown at 100 mL volumetric flasks filled with 'Kyoto' medium. Seedling had been grafted into a young rootstock, Hylocereus trigonus, and cultured in vitro in 100 mL test tube for more than six months. After re-grafting and planting in the green house in 2006, their characteristics were evaluated three times until 2009. The new cultivar has a flat round shape and bright yellow skin color. In addition, it has 7 to 9 ribs with gray and straight spines on the body and produces an average of 12.3 offsets.

• 한국전자파학회논문지
• /
• 제23권1호
• /
• pp.115-121
• /
• 2012

본 논문에서는 Ka-대역 모노 펄스 레이더용 도파관 광벽 슬롯 배열 안테나의 설계, 제작 및 측정 결과에 대해 기술하였다. 설계 방법으로는 개구면의 분포를 원하는 이득과 빔 폭 및 SLL을 고려하여 설계하였고, 등가 회로에서의 각 슬롯의 어드미턴스에 해당하는 도파관 슬롯의 옵셋과 길이를 Elliott 배열 합성 기법을 통해 구하였다. 설계한 도파관 슬롯 배열을 CST MWS로 해석한 결과, 주어진 대역폭 내에서 -10 dB 이하의 반사 손실, 32 dBi 이상의 이득, 3.7도의 3 dB 빔 폭, -20 dB의 SLL 결과를 얻었다. 또한, 설계한 안테나의 제작과 측정을 통하여 시뮬레이션 결과를 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.303.2-303.2
• /
• 2014

The oxides of group IV transition metals such as titanium, zirconium, hafnium have many important current and future application, including protective coatings, sensors and dielectric layers in thin film electroluminescent (TFEL) devices. Recently, group IV transition metal oxide films have been intensively investigated as replacements for SiO2. Due to high permittivities (k~14-25) compared with SiO2 (k~3.9), large band-gaps, large band offsets and high thermodynamic stability on silicon. Herein, we report the synthesis of new group IV transition metal complexes as useful precursors to deposit their oxide thin films using chemical vapor deposition technique. The complexes were characterized by FT-IR, 1H NMR, 13C NMR and thermogravimetric analysis (TGA). Newly synthesised compounds show high volatility and thermal stability, so we are trying to deposit metal oxide thin films using the complexes by Atomic Layer Deposition (ALD).

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.121-122
• /
• 1998

To induce perturbed magnetic field variations in the range of auto prescans permitted, we chose artificially shim values and applied manualy as DC offsets to X, Y, Z gradient amplifiers. The STEAM spectra were obtained from a localized region (8ml) of phantom's center and a Marquart Algorithm is employed to quantify MRS spectra. Results indicated that Creatine (Cr) which had a good correlation between a signal intensity and an area, changed little bit and showed extremly a stabilized state in perturbed magnetic field variations. Therefore, during the MRS experiments, to minimize the SNR reduction by means of unavoidable inhomogeneous magnetic fields, the present study suggested that the quantification method of relative ratios produced by replacing Cr concentration with standard quantify was most desirable.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제47권2호
• /
• pp.135-154
• /
• 2008

The purpose of this study is to help to improve the method of math teaching by analysing how learner-centered teaching method offsets mathematical creativity and mathematical disposition. For this purpose, research questions are established as follows; (1) Mathematical creativity between open-ended learning activity approach(OLAA) and general classroom-based instruction(GCI) shows any difference? (2) Mathematical disposition between OLAA and GCI shows any difference? The results obtained through this study were as follows: (1) There was significant difference between OLAA group and CCI group in mathematical creativity. This means that open-ended learning activity approach was generally more effective in improving mathematical creativity than general classroom-based instruction. (2) There was no significant difference between OLAA group and GCI group in mathematical disposition. But the average scores of mathematical disposition except mathematical confidence improved a little. So we can say that open-ended learning activity approach brought an positive influence on students' mathematical disposition. The results obtained in this study suggest that the OLAA can be used to cultivate the children's mathematical creativity and disposition. Therefore, I suggest that teachers should use the OLAA to improve the children's mathematical creativity and disposition.

• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1080-1086
• /
• 2005

The preliminary design optimization of multi-stage spur gear reduction units has been a subject of considerable interest, since many high-performance power transmission applications (e.g., automotive and aerospace) require high-performance gear reduction units. There are multiple objectives in the optimal design of multi-stage spur gear reduction unit, such as minimizing the volume and maximizing the surface fatigue life. It is reasonable to formulate the design of spur gear reduction unit as a multi-objective optimization problem, and find an appropriate approach to solve it. In this paper an interactive physical programming approach is developed to place physical programming into an interactive framework in a natural way. Class functions, which are used to represent the designer's preferences on design objectives, are fixed during the interactive physical programming procedure. After a Pareto solution is generated, a preference offset is added into the class function of each objective based on whether the designer would like to improve this objective or sacrifice the objective so as to improve other objectives. The preference offsets are adjusted during the interactive physical programming procedure, and an optimal solution that satisfies the designer's preferences is supposed to be obtained by the end of the procedure. An optimization problem of three-stage spur gear reduction unit is given to illustrate the effectiveness of the proposed approach.

• 대한기계학회논문집B
• /
• 제30권9호
• /
• pp.850-857
• /
• 2006

Hydrogen production using current fueling facilities is essential for near-term applications of fuel cells. A preliminary process for developing a natural gas autothermal reforming (ATR) reactor for fuel cells is presented in this paper. A experimental reactor for methane ATR was constructed and used for characterization of Jin reactor. Temperature profiles of the reactor were observed, and reformed gas compositions were analyzed to evaluate efficiency, conversion and reaction heat with varying amounts of $O_2/CH_4$ at selected furnace temperature and $H_2O/CH_4$. The amount of $O_2/CH_4$ showed strong offsets on reactor temperature, efficiency and conversion indicating that $O_2/CH_4$ is a crucial operation condition. Operation conditions which result in thermal neutrality of ATR reactor system were determined for two cases of an ATR system based on the estimation of enthalpy difference between reactants of assumed inlet temperatures and the products from experimental results. The determined conditions for thermally neutral operations could be used for guidelines to design reformers and for determining the operation parameters of a self sustaining ATR reactor.