• 한국인쇄학회지
• /
• 제25권2호
• /
• pp.15-28
• /
• 2007

For the color offset printing, it starts with input of data. The past days, drum scanner or flat scanner used to input of data, but now it changes gradually into using of digital camera because digital camera become popular. The high quality digital camera saves as a data(RAW format), sRGB which have built in digital camera, or Adobe RGB format. sRGB of ICC(International Color Consortium) profile is a standard color gamut of digital camera. Distribution of color gamut in sRGB is less than Adobe RGB have a distribution in ICC profile. sRGB also can not be expressed in some specific part, because distribution of color gamut in sRGB is not able to cover all parts in ICC Profile of international standards CMYK. It is more popular to use Adobe RGB than sRGB to do high quality offset printing and software basis color setting in Europe and Japan. In spite of this data basis, there is a difficulty of doing color correction between the color proofing prints and the final prints. To see how the software color setting effects to RGB data, this thesis will use Gretag Macbeth ColorChecker 24 patch which has the most general natural color chart to compare sRGB and Adobe RGB to check the differences of color changes. It will use the several factors that came out from the process of making ICC Profile to figure out the optimum In-house profile. It also compares the differences of using matt paper and glossy paper to do best quality color proof offset printing, and how the Rendering Intent effects the proof print.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.2.2-2.2
• /
• 2011

In this talk, the general concept of roll-to-roll printing technologies will be introduced with basic fundamentals of ink formulations for printing electronic devices as the first part of the talk. As the second part, based on the R2R printing process, key factors for printing TFTs, IC, PV and display would be presented using the information from the case study of R2R gravure and offset.

• 한국인쇄학회지
• /
• 제14권2호
• /
• pp.21-36
• /
• 1996

With increased use of halftone dot overprints for offset color printing, it is important to study the density and ink trap of the overprints. In this research the equation to predict the density and the method to evaluate ideally the fractional ink trap are preposed. And also the halftone dot overprinting experiments of Magenta over Cyan or Cyan over Magenta under wet-on-wet or wet-on-dry overprinting using 2-color offset press show the above proposals are reasonable, and show the effect of overprinting sequence on the density and ink trap.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.961-962
• /
• 2008

• 한국산업보건학회지
• /
• 제19권3호
• /
• pp.270-279
• /
• 2009

In order to check a necessity of health control for the laborers who are in use of mixed organic solvents in the printing industries, this study evaluated the use status of mixed organic solvents, health subjective symptoms on the exposure of the solvents, health hazard for each kind of printings for the employees who work for the printing industries located in Seoul and Gyeonggi. The study analyzed 228 sites and 311 people responded of the total 250 sites surveyed from March to September 2007, and obtained the following results; 1) Estimating the exposure of the mixed organic solvents, the study found that estimation of mixture(EM) was different for each kind of printings at a level of significance, excessiveness of EM was 7.5%, the highest, for gravure printing, 5.6% for screen printing, 4.7% for master printing, 2.9% for offset printing. 2) As to the mean scores of health subjective symptoms for each kind of printings, workers in screen printing showed high scores in every subjective symptom, of which symptom of central nervous system was 3.75, the highest, and the difference was statistically at a level of significance(p<0.01). 3) Results of the hazard analysis for carcinogens and non-carcinogens contained in the mixed organic solvents exposed to the workers showed that cancer risk of offset printing workers was $7.8{\times}10^{-9}$ for benzene, the mean cancer risk was $2.02.{\times}10^{-8}$ from Monte-Carlo simulation, and both risks did not exceed the US EPA permissible standard of $1{\times}10^{-6}$. The total hazard indices of the non-carcinogens estimated was 3.523, the highest, for gravure printing, 2.381 for master printing, 1.125 for screen printing, respectively, and all exceeded 1.

• 한국콘텐츠학회논문지
• /
• 제15권1호
• /
• pp.74-85
• /
• 2015

RGB기반의 사진이미지를 오프셋 인쇄로 출력할 때 색역의 차이에 의한 색 손실이 발생하는 것은 상식이다. 따라서 사진가는 사진을 인쇄의뢰 할 때 일정정도의 색 손실을 감안하고 인쇄를 시행해야 한다. 이때 원본과 최대한 가까운 결과를 얻기 위해 시행하는 작업이 교정이다. 이러한 교정은 디지털기술이 도입되면서 관리가 용이해졌다. 즉 교정에 디지털장비를 사용하게 되어 교정의 질을 일정하게 유지 관리할 수 있게 되었다. 본 연구는 이러한 교정에 관한 연구이다. 기존에도 교정에 관한 연구가 있었지만 이는 인쇄분야에서 시행한 연구로 인쇄소 시스템을 기반으로 하고 있다. 즉 사진가가 거의 사용하지 않는 인쇄용 립(RIP)과 고가의 인쇄전용 장비를 필요로 하는 연구이다. 따라서 사진가 스스로 자신의 기준에 맞춘 교정을 시행하기 어려운 실정이다. 본 연구에서는 사진가가 직접 사진용 시스템을 이용하여 교정 작업을 시행할 수 있는 방안을 모색하기 위해 시행하였다. 즉 사진가가 주로 사용하는 포토샵 프로그램과 사진용 잉크젯 프린터 그리고 사진용지를 이용한 교정에 관한 연구이다.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2000년도 추계 학술 발표회 논문집
• /
• pp.38-42
• /
• 2000

• 한국정밀공학회지
• /
• 제31권6호
• /
• pp.477-481
• /
• 2014

Flexible electronics have been to the fore because it is believed that flexibility can add incredible value such as light weight and mobility into the existing electronic devices and create new markets of large-area and low-cost electronics such as wearable eletronics in near future. Offset printing processes are regarded as major candidates for manufacturing the flexible electronics because they can provide the patterning resolution of micron-size effectively in large-area. In view of mechanics, the most important viewpoint in offset printing is how to achieve the synchronized movement of two contact surfaces in order to prevent slip between two contact surfaces and distortion of the blanket surface during ink transfer so that the high-resolution and good-overlay patterns can be printed. In this paper, a novel low-cost measurement method of the synchronization error using the motor control output signals is proposed and the compensation method is presented to minimize the synchronization error.

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.160-166
• /
• 2004

In this study, a new algorithm, named as Contour Offset Algorithm(COA) is developed to fabricate precise features or patterns in the range of several micrometers by nano replication printing(nRP) process. In the nRP process, a femto-second laser is scanned on a photosensitive monomer resin in order to induce polymerization of the liquid monomer according to a voxel matrix which is transformed from the bitmap format file. After polymerization, a droplet of ethanol is dropped to remove the unnecessary remaining liquid resin and then only the polymerized figures with nano-scaled precision are remaining on the glass plate. To obtain more precise replicated features, the contour lines in voxel matrix should be modified considering a voxel size. In this study, the efficiency of the proposed method is shown through two examples in view of accuracy.

• 한국인쇄학회지
• /
• 제27권1호
• /
• pp.15-27
• /
• 2009

Since domestic offset print quality control depends on the experience of persons in charge rather than objective data, the standards from the data are needed for the well-organized quality management of high-quality prints. Based on the ISO standards, now the standard specifications, such as GRACoL 7, SWOP 11, SNAP, G7 in America, and EURO Color, ECI, BVDM in Europe, and Japan Color 2001, Japan Color 2004 in Japan, are employed. There exists KS for domestic standards. However, since it has been directly imported from ISO Standards, there are discrepancies in printing materials and media. Although the quality management of commercial prints has been focused and studied. For this circumstance, standards are needed for the production of prints to meet international standards. This paper aims to find out suitable ways to approach domestic printing standards using densitometric method and colorimetric method. Printing experiments on this study were performed with domestic process color inks(Cyan, Magenta, Yellow, Black) and domestic coated papers, under the same conditions as the actual commercial printing processes. In densitometric method, how to set up the optimal solid print density was studied through three tests such as the ways to match solid print density and print contrast to GRACoL standards respectively, and the way to get the highest contrast. In colorimetric method, how to get solid print density with the minimum color difference between the $CIEL^*a^*b^*$ color specification values in GRACoL standards and the measured color specification values in prints, was studied.