• Journal of Communications and Networks
• /
• 제2권1호
• /
• pp.58-68
• /
• 2000

In this paper we introduce the correlation-aided distributed sample acquisition (CDSA) scheme for fast cell search in IMT-2000 W-CDMA cellular system. The proposed scheme incorporates the state symbol correlation process into the comparison-correction based synchronization process of the original DSA scheme to enable fast acquisition even under very poor channel environment. for its realization, each mobile station (MS) has to store in its memory a set of state sample sequences. which are determined by the long-period scrambling sequences used in the system and the sampling interval of the state samples. CDSA based cell search is carried out in two stages : First, the MS first acquires the slot timing by using the primary synch code (PSC) and then identifies the igniter code which conveys the state samples of the current cell . Secondly. the MS identifies the scrambling code and frame timing by taking the comparison-correction based synchronization approach and, if the identification is not done satisfactorily within preset time. it initiates the state symbol correlation process which correlates the received symbol sequence with the pre-stored state sample sequences for a successful identification. As the state symbol SNR is relatively high. the state symbol correlation process enables reliable synchronization even in very low chip-SNR environment. Simulation results show that the proposed CDSA scheme outperforms the 3GPP 3-step approach, requiring the signal power of about 7 dB less for achieving the same acquisition time performance in low-SNR environments. Furthermore, it turns out very robust in the typical synchronization environment where large frequency offset exists.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.130-133
• /
• 2007

In order to get high quality and high resolution image data from the space-borne camera system, the image chain from the sensor to the user in the ground-station need to be designed and controlled with extreme care. The behavior of the camera system needs to be controlled by ground commands to support on-orbit calibration and to adjust imaging parameters and to perform early stage on-orbit image correction, like gain and offset control, non-uniformity correction, etc. The operation status including the temperature of the sensor needs to be transferred to the ground-station. The preparation time of the camera system for imaging with specific parameters should be minimized. The camera controller needs to synchronize the operation of cameras for every channel and for every spectral band. Detail timing information of the image data needs to be provided for image data correction at ground-station. In this paper, the design of the camera controller for the AEISS on KOMPSAT-3 will be introduced. It will be described how the image chain is controlled and which imaging parameters are to be adjusted The camera controller will have software for the flexible operation of the camera by the ground-station operators and it can be reconfigured by ground commands. A simple concept of the camera operations and the design of the camera controller, not only with hardware but also with controller software are to be introduced in this paper.

• 전기학회논문지
• /
• 제66권2호
• /
• pp.328-338
• /
• 2017

In this paper, a zero torque control scheme adopting current sharing function (CSF) used in integrated Switched Reluctance Motor (SRM) drive with DC battery charger is proposed. The proposed control scheme is able to achieve the keeping position (KP), zero torque (ZT) and power factor correction (PFC) at the same time with a simple novel current sharing function algorithm. The proposed CSF makes the proper reference for each phase windings of SRM to satisfy the total charging current of the battery with zero torque output to hold still position with power factor correction, and the copper loss minimization during of battery charging is also achieved during this process. Based on these, CSFs can be used without any recalculation of the optimal current at every sampling time. In this proposed integrated battery charger system, the cost effective, volume and weight reduction and power enlargement is realized by function multiplexing of the motor winding and asymmetric SR converter. By using the phase winding as large inductors for charging process, and taking the asymmetric SR converter as an interleaved converter with boost mode operation, the EV can be charged effectively and successfully with minimum integral system. In this integral system, there is a position sliding mode controller used to overcome any uncertainty such as mutual inductance or DC offset current sensor. Power factor correction and voltage adaption are obtained with three-phase buck type converter (or current source rectifier) that is cascaded with conventional SRM, one for wide input and output voltage range. The practicability is validated by the simulation and experimental results by using a laboratory 3-hp SRM setup based on TI TMS320F28335 platform.

• 한국통신학회논문지
• /
• 제30권10A호
• /
• pp.922-929
• /
• 2005

본 논문에서는 직접대역 확산 통신 기법을 사용하는 이동통신 시스템에서 하향링크상의 무선신호를 이용하여 오버헤드 채널상의 정보를 취득하고 이 정보를 이용하여 파일롯 채널을 생성함으로써 기지국 간 하드핸드오프를 가능하게 하는 적응형 파일롯 비콘 장치를 제안한다. 본 적응형 파일롯 비콘 장치는 무선 신호 중에서 파일롯 채널 만을 선별하여 생성 및 전송하므로 상대적으로 낮은 전력으로 서비스가 가능하며, CDMA 수신부에서 하향링크상의 파일롯 채널로부터 기지국의 시간동기 및 주파수 동기를 획득하여 장치의 오프셋을 보정하므로 GPS에 의한 시간동기가 필요하지 않으며 기지국 순방향 신호의 수신이 가능한 임의의 장소에 설치가 가능한 장점이 있다. CDMA수신기에서 하향링크 파일롯 신호를 탐색하는 파일롯 서처는 FPGA와 DSP를 이용하며, FPGA에서 구현된 파일롯 서처는 초기동기 획득용으로 사용되곤 DSP에서 구현되는 파일롯 서처는 비콘장치의 클럭과 기지국 장치의 클럭사이에 발생하는 오프셋 오차를 보정하는 역할을 수행한다. 적응형 파일롯 비콘 장치의 CDMA 송신부는 CDMA 수신부에서 취득한 파일롯 채널의 시간정보인 타임오프???V을 이용하여, 기지국에 동기된 하향링크 파일롯 신호를 생성한다. FIR필터를 통하여 출력된 1차 중간주파신호는 RF모듈웨서 상향변환된 후 고출력증폭기와 안테나를 통하여 방사하게 된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.73-76
• /
• 2000

A Scene Based Technique(SBT) that corrects linear array infrared detector's nonuniformity is proposed. Basically, this technique dispenses with using temperature references on a linear array infrared detector. To correct the nonuniformity of infrared images, we use three methods. Firstly, we detect bad channels by using the information which is cumulated all the same line pixels. Secondly, a variable window method is applied to compensate more accurately. Thirdly, an adaptive method which updates gain and offset coefficient is used only on a stationary region. These results are demonstrated on a computer simulation with various images. As a result, the nonuniformity is corrected completely, so that images are enhanced and PSNR(peak signal to noise ratio) is improved much.

• 대한전기학회논문지
• /
• 제41권9호
• /
• pp.953-959
• /
• 1992

As the TC(time-current) curve corresponding to symmetrical time invariant RMS value has been traditionally chosen and used for setting the relay, it has caused the misoperation errors on relay coordination because of CT secondary current being actually an asymmetrical time varying RMS value. In this paper, an algorithm for calculating the relay operating time is developed to study the asymmetrical effect using the step-by-step method. We represent the relay operating time errors between with and without DC offset versus PSM(plug setting multiplier), TMS(time multiplier setting) and X/R ratio. And also we present the correction factor. Finally we confirm the validity of this technique through the case study.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 춘계학술대회 논문집
• /
• pp.308-310
• /
• 2007

복사 보정에 해당하는 NUC(Non-Uniformity Correction)은 MSC 각각의 픽셀들이 가지는 상이한 특성을 균일한 이미지를 얻기 위해 보정하는 작업으로서 KOMPSAT-2 검보정 작업 중 Video Processor 의 Electrical Gain/Offset 의 보정 과 더 불어 매 우 중요한 비중을 차지하는 과정이다. 본 논문에서는 KOMPSAT-2 의 Panchromatic 밴드의 raw image 를 이 용한 NUC 보정 작업 의 과정과 그 결과에 대해서 소개하고자 한다.

• Journal of Astronomy and Space Sciences
• /
• 제17권2호
• /
• pp.295-308
• /
• 2000

OSMI(Ocean Scanning Multi-Spectral Imager) raw image data(Level 0) were acquired and radiometrically corrected. We have applied two methods, using solar & dark calibration data from OSMI sensor and comparing with the SeaWiFS data, to the radiometric correction of OSMI raw image data. First, we could get the values of the gain and the offset for each pixel and each band from comparing the solar & dark calibration data with the solar input radiance values, calculated from the transmittance, BRDF (Bidirectional Reflectance Distribution Function) and the solar incidence angle($\beta$, $\theta$) of OSMI sensor. Applying this calibration data to OSMI raw image data, we got the two odd results, the lower value of the radiometric corrected image data than the expected value, and the Venetian Blind Effect in the radiometric corrected image data. Second, we could get the reasonable results from comparing OSMI raw image data with the SeaWiFS data, and get a new problem of OSMI sensor.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 Proceedings of 2004 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.135-140
• /
• 2004

Several studies have utilized physical models of the healthy nasal cavity to investigate the relationship between nasal anatomy and airflow. With our experiences of experimental investigations on nasal airflows in normal and abnormal nasal cavity models, we are going to deal with the topic that may contribute to the diagnosis and treatment of nasal diseases. In this paper, airflows in the normal and artificially deformed models, which simulate surgical treatment, are investigated experimentally by PIV. High-resolution CT data and careful surface rendering of computational model with the help of the ENT doctor provide more sophisticated nasal cavity models. The CBC PIV (Correlation Based Correction PIV) algorithm with window offset is used for PIV flow analysis. Average and RMS distributions in sagittal and coronal sections are obtained for inspiratory and expiratory nasal airflows. Comparisons in nasal airflows for both normal and deformed cases are also appreciated. In case of simulations of surgical operations, velocity and RMS distributions in coronal section changes locally, this may cause some difficulties in physiologic functions of noses and may hurt mucosal surface.

• Journal of Biosystems Engineering
• /
• 제42권3호
• /
• pp.170-189
• /
• 2017

Purpose: This paper presents Raman chemical imaging technology for inspecting food and agricultural products. Methods The paper puts emphasis on introducing and demonstrating Raman imaging techniques for practical uses in food analysis. Results & Conclusions: The main topics include Raman scattering principles, Raman spectroscopy measurement techniques (e.g., backscattering Raman spectroscopy, transmission Raman spectroscopy, and spatially offset Raman spectroscopy), Raman image acquisition methods (i.e., point-scan, line-scan, and area-scan methods), Raman imaging instruments (e.g., excitation sources, wavelength separation devices, detectors, imaging systems, and calibration methods), and Raman image processing and analysis techniques (e.g., fluorescence correction, mixture analysis, target identification, spatial mapping, and quantitative analysis). Raman chemical imaging applications for food safety and quality evaluation are also reviewed.