• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.372-376
• /
• 2018

The effects of off-state bias stress on the characteristics of p-type poly-Si TFT were investigated. To reduce the gate-induced drain leakage (GIDL) current, the off-state bias stress was changed by varying Vgs and Vds. After application of the off-state bias stress, the Vgs causing GIDL current was dramatically increased from 1 to 10 V, and thus, the Vgs margin to turn off the TFT was improved. The on-current and subthreshold swing in the aged TFT was maintained. We performed a technology computer-aided design (TCAD) simulation to describe the aged characteristics. The aged-transfer characteristics were well described by the local charge trapping. The activation energy of the GIDL current was measured for the pristine and aged characteristics. The reduced GIDL current was mainly a thermionic field-emission current.

• ETRI Journal
• /
• v.42 no.1
• /
• pp.46-53
• /
• 2020

Gait analysis is an effective clinical tool across a wide range of applications. Recently, inertial measurement units have been extensively utilized for gait analysis. Effective gait analyses require good estimates of heel-strike and toe-off events. Previous studies have focused on the effective device position and type of triaxis direction to detect gait events. This study proposes an effective heel-strike and toe-off detection algorithm using a smart insole with inertial measurement units. This method detects heel-strike and toe-off events through a time-frequency analysis by limiting the range. To assess its performance, gait data for seven healthy male subjects during walking and running were acquired. The proposed heel-strike and toe-off detection algorithm yielded the largest error of 0.03 seconds for running toe-off events, and an average of 0-0.01 seconds for other gait tests. Novel gait analyses could be conducted without suffering from space limitations because gait parameters such as the cadence, stance phase time, swing phase time, single-support time, and double-support time can all be estimated using the proposed heel-strike and toe-off detection algorithm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.6
• /
• pp.610-619
• /
• 2000

This paper presents an off-line UPS using the high temperature superconductive magnetic bearing. FES(Flywheel Energy Storage) system has good advantages in compare with lead acid battery. So, high efficiency FES using high temperature SMB(superconductive magnetic bearing) was composed in this paper. The outer rotor type of PMSM(Permanent Magnet Synchronous Motor) as motor/generator was used for the experiment, and square wave current and sinusoidal wave control methods was compared for high efficiency operation of motor/generator. The circuit for in phase sinusoidal wave current control with EMF in the full speed range was designed and the proposed flywheel energy storage system was applied in single phase off-line UPS system. As the stable operation characteristics of prototype system was confirmed, the its excellence as energy storage device in Off-line UPS was proved.

• Journal of Fashion Business
• /
• v.12 no.5
• /
• pp.14-23
• /
• 2008

Recently, our society has been expanding with its consumption of brand products as it is referred to as brand product syndrome. In particular, the trend is that young consumers in 20$\sim$30s prefer the fashion brand product for their wedding. In our study, the lifestyle and shopping tendency of consumers who prefer the fashion brands are found out, and the influence impacted on the intent of repurchase of fashion brand product are clarified through the path analysis with the following outcome. First, for the group factors in life style of the consumers who prefer fashion brand products for wedding, it is shown with the self-advancement type, home striving type, economy striving type, high class brand striving type, and social activity type. Second, as for the factor of shopping tendency of the consumers who prefer fashion brand products for wedding, it appears for the factors of pursuing for enjoyment, pursuing for show off, pursuing for individuality, and pursuing for convenience. And third, when the life style group for high class brand type of consumers goes for shopping for fashion brand for wedding, it displays the shopping tendency for pursuing for enjoyment, pursuing for show off, and pursuing for individuality, and these factors influence the most in the intent to re-purchase of fashion brand goods.

• Journal of Fashion Business
• /
• v.7 no.6
• /
• pp.85-91
• /
• 2003

Quick Response based Mass-Customization can be produced and distributed customized goods and services on mass basis in apparel e-business. Because consumers cannot touch and feel the apparel products in e-business, they tend to have the negative buying behavior. The purposes of this study were to analyze factors of texture image, and to investigate the differences of consumer sensibility on texture image of apparel products based on different marketing channels (on-line/off-line). Two types of questionnaires for on-line and off-line were used to assess consumer sensibility on apparel fabric. The 8 swatches were selected based on the previous literatures. 202 returned questionnaires for each type (on-line/off-line) were analyzed by t-test, mean and standard deviation with SPSS 10.0. The result of this study was showed that there were partially significant differences on consumer sensibility on texture image of apparel products between on-line and off-line. In case of corduroy, consumers perceived more high-class image under on-line than off-line. In case of taffeta, consumers perceived more thin and dense image under off-line (traditional marketing channel) than on-line (e-commerce). In case of denim, consumers perceived more thin and natural image under off-line than online. In case of organza, consumers perceived more natural image under on-line than off-line. In case of satin, consumers perceived more natural image under on-line than off-line. In case of chiffon, consumers perceived denser image under on-line than off-line. In case of velvet, consumers perceived thinner image, higher-class image, and more natural image of texture sensibility under on-line than off-line. In case of single jersey, consumers perceived higher-class image, and denser image of texture under on-line than off-line.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.744-747
• /
• 2008

Quantity information focused on a design drawing plays a critical role in a decision making related to cost for project participants during project life cycles. Related participants absolutely depend on quantity take-off working which produces the quantity information by hand, and then a worker's mistake often causes many errors. The difference of quantity by the know-how of the person in charge of the estimation also occurs. In addition, the worker passes through the whole quantity take-off processes again in case of re-working for quantity take-off produced by a change order. The requirements about the automated estimation increase because of the needs for the accurate quantity take-off and dealing with the change order and recently, the studies about the automated estimation working process based on 34 cad model from 3d cad modeler are attempted in various viewpoints. However, the existing studies reach the limits such as common quantity data type framework for getting Quantity information. Focused on a certain 34 cad modeler and BIM based automation of estimation using it Therefore, the objective of this study is to develop the a series of system which can extract, analyze, and verify Quantity Data Type in modeler to automate quantity take-off originated from various 3d cad modelers as a foundation study for BIM based automation of estimation framework.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.4
• /
• pp.311-317
• /
• 1999

In this paper, the resonant inverter of SEPP-LCC type is proposed and described the operating principle. As adding t two capacitors in the switching devices in parallel. the proposed inverter can reduce switching losses. noise and voltage s stress at Turn-on and Turn-off. The analysis of the proposed circuit are described by using the normalized parameters. The data of design are got by the characteristic values and an example of the design's method is proposed. In addition. t the justification of theoretical analysis is verified by comparing to the experimental waveforms.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.2
• /
• pp.43-50
• /
• 2011

Carbon-nanotube metal oxide semiconductor field effect transistor (CN-MOSFET) is a promising future device candidate. The electrical characteristics of 16 nm N-type CN-MOSFETs are explored in this paper. The optimum N-type CN-MOSFET device profiles with different number of tubes are identified for achieving the highest on-state to off-state current ratio ($I_{on}/I_{off}$). The influence of substrate voltage on device performance is also investigated in this paper. Tradeoffs between subthreshold leakage current and overall switch quality are evaluated with different substrate bias voltages. Technology development guidelines for achieving high-speed, low-leakage, area efficient, and manufacturable carbon nanotube integrated circuits are provided.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.364-369
• /
• 1987

It has recently shown that a solenoid valve can be utilized in a hydraulic position-control system by discontinuous control methods. The objective of this study is to investigate the effects of solenoid valves on the response characteristics of a hydraulic position-control system by applying two kinds of discontinued control methods i.e., Simple On-Off (SOF) and Pusating On-Off(POF) controls. Three types of solenoid valves i.e. low-frequency, closed-center type (LF/C), high-frequency, closed-center type (HF/C), low-frequency, tandem-center type(LF/T) were used in this study. Effects of loading conditions and control parameters on the response characteristics were experimentally examined and compared each other. Pressure transients within the actuator were also studied.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.20-29
• /
• 2021

As the feasibility of urban air mobility (UAM) service using electric vertical take-off and landing (eVTOL) aircraft increases due to aircraft electrification, distributed propulsion, and artificial intelligence technologies, the U.S. and European aeronautical societies have been improving their certification system and regulations for the type certification of eVTOL. The improved certification system is expected to be ready in the near future, after the European Union Aviation Safety Agency (EASA) proposed the VTOL Special Condition, SC-VTOL in 2019. However, the current domestic certification system is still insufficient to properly respond to eVTOL. This study investigated the development trends of foreign eVTOL and certification systems, identified considerations to improve the domestic certification system, and proposed the measures for type certificates and type certificates validation of eVTOL based on the comparison between SC-VTOL and Korea airworthiness standards (KAS).