• 한국전기전자재료학회논문지
• /
• 제31권6호
• /
• pp.372-376
• /
• 2018

The effects of off-state bias stress on the characteristics of p-type poly-Si TFT were investigated. To reduce the gate-induced drain leakage (GIDL) current, the off-state bias stress was changed by varying Vgs and Vds. After application of the off-state bias stress, the Vgs causing GIDL current was dramatically increased from 1 to 10 V, and thus, the Vgs margin to turn off the TFT was improved. The on-current and subthreshold swing in the aged TFT was maintained. We performed a technology computer-aided design (TCAD) simulation to describe the aged characteristics. The aged-transfer characteristics were well described by the local charge trapping. The activation energy of the GIDL current was measured for the pristine and aged characteristics. The reduced GIDL current was mainly a thermionic field-emission current.

• ETRI Journal
• /
• 제42권1호
• /
• pp.46-53
• /
• 2020

Gait analysis is an effective clinical tool across a wide range of applications. Recently, inertial measurement units have been extensively utilized for gait analysis. Effective gait analyses require good estimates of heel-strike and toe-off events. Previous studies have focused on the effective device position and type of triaxis direction to detect gait events. This study proposes an effective heel-strike and toe-off detection algorithm using a smart insole with inertial measurement units. This method detects heel-strike and toe-off events through a time-frequency analysis by limiting the range. To assess its performance, gait data for seven healthy male subjects during walking and running were acquired. The proposed heel-strike and toe-off detection algorithm yielded the largest error of 0.03 seconds for running toe-off events, and an average of 0-0.01 seconds for other gait tests. Novel gait analyses could be conducted without suffering from space limitations because gait parameters such as the cadence, stance phase time, swing phase time, single-support time, and double-support time can all be estimated using the proposed heel-strike and toe-off detection algorithm.

• 전력전자학회논문지
• /
• 제5권6호
• /
• pp.610-619
• /
• 2000

본 논문에서는 현재 전력저장시스템으로써 가장 많이 사용하고 있는 배터리를 대체할 목적의 5MB (Superconductive Magnetic Bearing)를 이용한 off-line UPS에 관해 연구하였다 영구자석의 덩어리형 고온 초전도 체위에서의 부상득성을 이용하여 베어링 문제의 해결방안에 접근함으로써 고효율의 FES찰 구성하여 단상 off-line UPS에 적용하였으며 제어회로에는 80C 1 96KC 마이크로프로세서를 사용하였고 빠픈 응답윤 요구하는 부분 은 아날로그회로를 사용하여 구성하였다. 에너지 저장모드에서 컨버터 입력천류는 전원전압과 동상의 정현파로 제어하였으며 에너지 회생모드에서는 출력잔압윤 정현파로 제어하기위해 필터커패시터전류릎 직접 제어하였다. 시작 품제작을 통해 시스템의 안장된 동작특성을 확인함으로써 제안된 FES가 Off-line UPS 에서의 에너지 저장매체로써 우수함을 입증하였다.

• 패션비즈니스
• /
• 제12권5호
• /
• pp.14-23
• /
• 2008

Recently, our society has been expanding with its consumption of brand products as it is referred to as brand product syndrome. In particular, the trend is that young consumers in 20$\sim$30s prefer the fashion brand product for their wedding. In our study, the lifestyle and shopping tendency of consumers who prefer the fashion brands are found out, and the influence impacted on the intent of repurchase of fashion brand product are clarified through the path analysis with the following outcome. First, for the group factors in life style of the consumers who prefer fashion brand products for wedding, it is shown with the self-advancement type, home striving type, economy striving type, high class brand striving type, and social activity type. Second, as for the factor of shopping tendency of the consumers who prefer fashion brand products for wedding, it appears for the factors of pursuing for enjoyment, pursuing for show off, pursuing for individuality, and pursuing for convenience. And third, when the life style group for high class brand type of consumers goes for shopping for fashion brand for wedding, it displays the shopping tendency for pursuing for enjoyment, pursuing for show off, and pursuing for individuality, and these factors influence the most in the intent to re-purchase of fashion brand goods.

• 패션비즈니스
• /
• 제7권6호
• /
• pp.85-91
• /
• 2003

Quick Response based Mass-Customization can be produced and distributed customized goods and services on mass basis in apparel e-business. Because consumers cannot touch and feel the apparel products in e-business, they tend to have the negative buying behavior. The purposes of this study were to analyze factors of texture image, and to investigate the differences of consumer sensibility on texture image of apparel products based on different marketing channels (on-line/off-line). Two types of questionnaires for on-line and off-line were used to assess consumer sensibility on apparel fabric. The 8 swatches were selected based on the previous literatures. 202 returned questionnaires for each type (on-line/off-line) were analyzed by t-test, mean and standard deviation with SPSS 10.0. The result of this study was showed that there were partially significant differences on consumer sensibility on texture image of apparel products between on-line and off-line. In case of corduroy, consumers perceived more high-class image under on-line than off-line. In case of taffeta, consumers perceived more thin and dense image under off-line (traditional marketing channel) than on-line (e-commerce). In case of denim, consumers perceived more thin and natural image under off-line than online. In case of organza, consumers perceived more natural image under on-line than off-line. In case of satin, consumers perceived more natural image under on-line than off-line. In case of chiffon, consumers perceived denser image under on-line than off-line. In case of velvet, consumers perceived thinner image, higher-class image, and more natural image of texture sensibility under on-line than off-line. In case of single jersey, consumers perceived higher-class image, and denser image of texture under on-line than off-line.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.744-747
• /
• 2008

설계도면을 중심으로 산출되는 물량정보는 건설 프로젝트 생애주기 동안에 프로젝트 참여주체들에게 비용과 관련한 의사결정에 결정적인 역할을 하는 매우 중요한 정보이다. 이러한 정보를 생성하는 물량산출 업무가 수작업에 많이 의존하다보니 작업자의 실수에 의한 오류가 빈번하게 발생하고, 견적담당자의 노하우에 따라 물량의 차이가 존재하기도 한다. 또한, 설계변경에 의해서 물량산출을 위한 재작업에 들어가게 될 경우 모든 물량산출 프로세스를 다시 거쳐야 하는 문제가 있다. 이러한 제반 문제는 견적자동화를 통해 물량산출의 정확성 확보 및 설계변경 시 요구되는 물량산출의 대응력에 대한 요구를 증대시키고 있으며, 최근 3D CAD Modeler에서 생성된 3D CAD 모델을 기반으로 견적업무프로세스를 자동화하려는 연구가 다양한 관점에서 시도되고 있다. 그러나 기존 연구에서는 특정 3D CAD Modeler를 중심으로 한 견적자동화에 대한 연구로 다양한 3D CAD Modeler에서 생성된 3D CAD 모델로부터 물량정보를 취득하기 위한 공통체계 구축하고 이를 기반으로 BIM기반 견적자동화를 이루는 데 한계를 가지고 있다. 따라서 본 연구에서는 이러한 BIM기반 견적자동화 체계구축을 위한 기반 연구로 다양한 3D CAD Modeler로부터 물량산출을 자동화하기 위해 Modeler가 내부적으로 가지고 있는 Quantity Data Type을 추출하고, 이를 분석 및 검증할 수 있는 체계를 개발하였다.

• 전력전자학회논문지
• /
• 제4권4호
• /
• pp.311-317
• /
• 1999

본 논문에서는 SEPP-LCC형 부하 공진 고주파 인버터의 한 회로형식을 제안하고, 그 동작원리에 관해서 명확히 하였다. 제안한 인버터는 스위칭 소자 양단에 병렬로 커패시터를 추가함으로써 스위칭 소자의 턴-온과 턴-오프시에 발생하는 스위칭 손실, 노이즈, 스트레스 등을 줄일 수 있다. 범용성 있는 회로해석을 위하여 무차원화 파라미터를 도입하였고, 동작특성 및 평가를 통하여 얻은 특성치를 이용하여 회로를 설계하였다. 또한, 실험을 통하여 이론해석의 정당성을 입증하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제12권2호
• /
• pp.43-50
• /
• 2011

Carbon-nanotube metal oxide semiconductor field effect transistor (CN-MOSFET) is a promising future device candidate. The electrical characteristics of 16 nm N-type CN-MOSFETs are explored in this paper. The optimum N-type CN-MOSFET device profiles with different number of tubes are identified for achieving the highest on-state to off-state current ratio ($I_{on}/I_{off}$). The influence of substrate voltage on device performance is also investigated in this paper. Tradeoffs between subthreshold leakage current and overall switch quality are evaluated with different substrate bias voltages. Technology development guidelines for achieving high-speed, low-leakage, area efficient, and manufacturable carbon nanotube integrated circuits are provided.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.364-369
• /
• 1987

It has recently shown that a solenoid valve can be utilized in a hydraulic position-control system by discontinuous control methods. The objective of this study is to investigate the effects of solenoid valves on the response characteristics of a hydraulic position-control system by applying two kinds of discontinued control methods i.e., Simple On-Off (SOF) and Pusating On-Off(POF) controls. Three types of solenoid valves i.e. low-frequency, closed-center type (LF/C), high-frequency, closed-center type (HF/C), low-frequency, tandem-center type(LF/T) were used in this study. Effects of loading conditions and control parameters on the response characteristics were experimentally examined and compared each other. Pressure transients within the actuator were also studied.

• 항공우주시스템공학회지
• /
• 제15권3호
• /
• pp.20-29
• /
• 2021

항공기 추진시스템 전동화, 분산추진기술, 자율지능기술의 발달로 전기추진 수직이착륙 항공기(eVTOL: Electric Vertical Take-off and Landing)를 활용한 도심항공교통서비스 구현 가능성이 높아짐에 따라 미국, 유럽 등 항공선진국들에서 전기추진 수직이착륙 항공기에 대한 인증제도 연구가 활발히 진행되고 있다. 2019년 유럽항공안전청이 수직이착륙 항공기를 위한 새로운 기술기준 SC-VTOL을 고시하는 등 근시일 내 인증제도 마련이 예상되나 국내 인증제도는 eVTOL 항공기의 개발과 시장 운용에 대비가 미비하다. 본 연구에서는 해외 eVTOL 개발과 인증제도 마련 동향을 조사하고, 미국/유럽의 제도개선 방향을 분석하여 국내에 관련 인증제도 마련을 위한 고려사항을 분석하였다. 이 후 SC-VTOL과 현행 국내 항공기기술기준을 비교분석하고 국내 eVTOL 항공기 형식증명/형식증명승인을 위한 방안을 제시하였다.