• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.37-47
• /
• 2006

This work proposes a 10b 25MS/s $0.8mm^2$ 4.8mW 0.13um CMOS A/D Converter (ADC) for high-performance wireless communication systems such as DVB, DAB and DMB simultaneously requiring low voltage, low power, and small area. A two-stage pipeline architecture minimizes the overall chip area and power dissipation of the proposed ADC at the target resolution and sampling rate while switched-bias power reduction techniques reduce the power consumption of analog amplifiers. A low-power sample-and-hold amplifier maintains 10b resolution for input frequencies up to 60MHz based on a single-stage amplifier and nominal CMOS sampling switches using low threshold-voltage transistors. A signal insensitive 3-D fully symmetric layout reduces the capacitor and device mismatch of a multiplying D/A converter while low-noise reference currents and voltages are implemented on chip with optional off-chip voltage references. The employed down-sampling clock signal selects the sampling rate of 25MS/s or 10MS/s with a reduced power depending on applications. The prototype ADC in a 0.13um 1P8M CMOS technology demonstrates the measured DNL and INL within 0.42LSB and 0.91LSB and shows a maximum SNDR and SFDR of 56dB and 65dB at all sampling frequencies up to 2SMS/s, respectively. The ADC with an active die area if $0.8mm^2$ consumes 4.8mW at 25MS/s and 2.4mW at 10MS/s at a 1.2V supply.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.75-85
• /
• 2009

This work proposes a 13b 100MS/s 0.13um CMOS ADC for 3G communication systems such as two-carrier W-CDMA applications simultaneously requiring high resolution, low power, and small size at high speed. The proposed ADC employs a four-step pipeline architecture to optimize power consumption and chip area at the target resolution and sampling rate. Area-efficient high-speed high-resolution gate-bootstrapping circuits are implemented at the sampling switches of the input SHA to maintain signal linearity over the Nyquist rate even at a 1.0V supply operation. The cascode compensation technique on a low-impedance path implemented in the two-stage amplifiers of the SHA and MDAC simultaneously achieves the required operation speed and phase margin with more reduced power consumption than the Miller compensation technique. Low-glitch dynamic latches in sub-ranging flash ADCs reduce kickback-noise referred to the differential input stage of the comparator by isolating the input stage from output nodes to improve system accuracy. The proposed low-noise current and voltage references based on triple negative T.C. circuits are employed on chip with optional off-chip reference voltages. The prototype ADC in a 0.13um 1P8M CMOS technology demonstrates the measured DNL and INL within 0.70LSB and 1.79LSB, respectively. The ADC shows a maximum SNDR of 64.5dB and a maximum SFDR of 78.0dB at 100MS/s, respectively. The ABC with an active die area of $1.22mm^2$ consumes 42.0mW at 100MS/s and a 1.2V supply, corresponding to a FOM of 0.31pJ/conv-step.

• Journal of Nutrition and Health
• /
• v.39 no.1
• /
• pp.58-73
• /
• 2006

This research has done for 262 people of the aged men and women that are more than 65 years old who are live in 9 areas of Yecheon as target; through twice off ace to face interview for 24 hours recall method, the result of food intake for 2 days is as following. In case of energy, the aged men (women) of sixties ingested 67.7 $(72.0)\%$ of Korean RDA by 1,369 (1264) kcal, for the ages of seventies and eighties, 68.9 $(66.9)\%$ of Korean RDA and 76.3 $(65.8)\%$ by each 1,309 (1104) kcal and 1,368 (1052) kcal. The aged men ingested protein $46.0\~49.6 g$ ($70.6\~82.9\%$ of RDA), and aged women ingested protein $32.7\~40.2 g$ ($59.4\~73.0\%$ of RDA). Calcium intake of aged men was 388.8 mg, 319.8 mg, 284.4 mg by age range, and aged women was 291.9 mg ($41.6\%$ of RDA), 246.5 mg ($35.3\%$ of RDA), 240.1 mg ($34.3\%$ of RDA). Iron intake of aged men was $8.6\~8.9 mg$ ($72\~74%$ of RDA), and aged women ingested 8.6 mg ($71.3\%$ of RDA), 7.5 mg (62.6 of RDA$\%$), 6.6 mg ($55.4\%$ of RDA) for iron by age range. Vitamin $B_1$ intake of aged men was $0.62\~0.71 mg$ ($62\~71\%$ of RDA), and aged women's intake was $0.50\~0.60 mg$ ($50\~60\%$ of RDA). Vitamin $B_2$ intake of aged men was $0.59\~0.60 mg$ ($49\%$ of RDA), and aged women's intake was $0.45\~0.50 mg$ ($37\~42\%$ of RDA). Vitamin C intake by age range, in case of aged men (women) in sixties was 53.1 (48.9) mg, in seventies was 49.9 (33.2) mg and more than eighties was 34.1 (33.4) mg. The average food intake by age range, in aged men (women) of sixties was 828.9 (670.8) g and seventies was 726.8 (568.8) g and more than eighties was 656.0 (525.3) g. Plant food intake of aged men was 490.8-569.5 g and aged women was 417.9-537.7 g. Aged men (women) of MAR by age range, sixties was 0.60 (0.58), seventies was 0.59 (0.50) and more than eighties was 0.56 (0.49), respectively. INQ for protein, phosphorus, iron, vitamin A, vitamin B, niacin, vitamin C was more than 1 in 60's and 70's aged men, but there was no nutrients in eighties of aged women. Aged men and women's KDDS points represent average 3.14 and 3.04 (out of 5 points), and while intake of the milk was the most lacking, but intake of the fruit was the most lacking in DDS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6C
• /
• pp.648-658
• /
• 2003

As the usage of image/video contents increase, a security problem for the payed image data or the ones requiring confidentiality is raised. This paper proposed an image encryption methodology to hide the image information. The target data of it is the result from quantization in wavelet domain. This method encrypts only part of the image data rather than the whole data of the original image, in which three types of data selection methodologies were involved. First, by using the fact that the wavelet transform decomposes the original image into frequency sub-bands, only some of the frequency sub-bands were included in encryption to make the resulting image unrecognizable. In the data to represent each pixel, only MSBs were taken for encryption. Finally, pixels to be encrypted in a specific sub-band were selected randomly by using LFSR(Linear Feedback Shift Register). Part of the key for encryption was used for the seed value of LFSR and in selecting the parallel output bits of the LFSR for random selection so that the strength of encryption algorithm increased. The experiments have been performed with the proposed methods implemented in software for about 500 images, from which the result showed that only about 1/1000 amount of data to the original image can obtain the encryption effect not to recognize the original image. Consequently, we are sure that the proposed are efficient image encryption methods to acquire the high encryption effect with small amount of encryption. Also, in this paper, several encryption scheme according to the selection of the sub-bands and the number of bits from LFSR outputs for pixel selection have been proposed, and it has been shown that there exits a relation of trade-off between the execution time and the effect of the encryption. It means that the proposed methods can be selectively used according to the application areas. Also, because the proposed methods are performed in the application layer, they are expected to be a good solution for the end-to-end security problem, which is appearing as one of the important problems in the networks with both wired and wireless sections.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.110-120
• /
• 2005

For utilizing vitrification to treat low and intermediate level waste, industrial pilot plant was designed and constructed in October 1999 at Daejon, Korea through the joint research program among NETEC, MOBIS and SGN. More than 70 tests were performed on simulated IER, DAW etc. including key nuclide surrogate(Cs, Co); this plant has been shown to vitrify the target waste effectively and safely, however, some dust are generated from the HTF(High Temperature Filter) as a secondary waste. In case of long term operation, it is also concerned that pipe plugging can be occurred due to deposited dust in cooling pipe namely, connecting pipe between CCM(Cold Crucible Melter) and HTF. In this regard, we have developed the special complementary system of the off-gas treatment system to recycle the dust from HTF to CCM and to remove the interior dust of cooling pipe. Main concept of the dust recycling is to feed the dust to the CCM as a slurry state; this system is regarded as of an important position in the viewpoint of volume reduction, waste disposal cost and glass melt control in CCM. The role of DRS(Dust Recycling System) is to recycle the major glass components and key nuclides; this system is served to lower glass viscosity and increase waste solubility by recycling B, Na, Li components into glass melt and also to re-entrain and incorporate into glass melt like Cs, Co. Therefore dust recycling is helpful to control the molten glass; it is unnecessary to consider a separate dust treatment system like a cementation equipment. The effects of Dust Cleaner are to prevent the pipe plugging due to dust and to treat the deposited dust by raking the dust into CCM. During the pilot vitrification test, overall performance assessment was successfully performed; DRS and Dust Cleaner are found to be useful and effective for recycling the dust from HTF and also removing the dust in cooling pipe. The obtained operational data and operational experiences will be used as a basis of the commercial facility.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.5
• /
• pp.50-60
• /
• 2010

For the last half a century, the personal computer and software industries have been prosperous due to the incessant evolution of computer systems. In the 21st century, the embedded system market has greatly increased as the market shifted to the mobile gadget field. While a lot of multimedia gadgets such as mobile phone, navigation system, PMP, etc. are pouring into the market, most industrial control systems still rely on 8-bit micro-controllers and simple application software techniques. Unfortunately, the technological barrier which requires additional investment and higher quality manpower to overcome, and the business risks which come from the uncertainty of the market growth and the competitiveness of the resulting products have prevented the companies in the industry from taking advantage of such fancy technologies. However, high performance, low-power and low-cost hardware and software platforms will enable their high-technology products to be developed and recognized by potential clients in the future. This paper presents such a platform for industrial embedded systems. The platform was designed based on Telechips TCC8300 multimedia processor which embedded a variety of parallel hardware for the implementation of multimedia functions. And open-source Embedded Linux, TinyX and GTK+ are used for implementation of GUI to minimize technology costs. In order to estimate the expected performance and power consumption, the performance improvement and the power consumption due to each of enabled hardware sub-systems including YUV2RGB frame converter are measured. An analytic model was devised to check the feasibility of a new application and trade off its performance and power consumption. The validity of the model has been confirmed by implementing a real target system. The cost can be further mitigated by using the hardware parts which are being used for mass production products mostly in the cell-phone market.

• Korean Journal of Agricultural Science
• /
• v.23 no.2
• /
• pp.301-322
• /
• 1996

This study is first aimed at identifying the possibility of labour saving and production cost decreasing in rice production with respect to seed broad casting technology. Comparison of labour inputs and production costs of rice in-between USA and Korea and recommendation of policy guidelines for the continous rice cultivation are the second objective of this study. Under the WTO system, rice enterprice is the most vulnerable crop in the sense of labour productivity and price competitiveness in the international market. How to adapt labour saving technology and how to decrease production costs are the most imminent problems to be solved in rice production. To achieve the objectives, survey on nine rice enterprice farms were made in Daeho tidal farmland with respect to the size of farm, labour inputs, productivity, farm mechanization and farm land base development. The existing data on labour saving technology by seed broadcasting which had surveyed by Rural Development Administration were collected to compare the surveyed data from Daeho tidal farm land The study results and policy recommendation are summarized as follows; 1. Labour requirements per 10a for rice enterprise farms with seed broadcasting and with transplanting were estimated 11.4 and 18.5hours respectively. 'This above labour inputs were equivalent to 1/3-1/5 of the national average labour inputs of 53.6 hours which were included transplanting and harvesting by machinery. Considering the labour requirement of 1.7 hours per 10a for the USA rice production, Korea rice culture has possibility to decrease labour demand upto USA level of labour inputs. 2. Production cost of rice in Korea were estimated US$4,181 per ha which were higher than that of USA by 3.00 times and production costs per ton were shown as US$313 for USA rice and US$1,018 for Korean rice. 3. Land productivity of rice per 10a in America was reached to 4,325kg and the counterpart of Korea was about 4,181kg in recent year. In the sense of land productivity, both yields of rice were comparable. 4. The price of japonica type rice similar to Korean traditional rice in international market in 1994 was f.o.b US$466 per ton which was equivalent to import parity price of US$830 per ton in domestic market. The price of rice purchased by Korean G't and received by farmers were amounted to US$ 2,013 and US$ 1,663 respectively in the same year. Domestic prices mentioned above were higher than the import parity price as US$830 by 2.0-2.4 times. 5. American rice production competitive to Korean rice was equivalent to 17,012 thousand tons, 1.28% of the world production of rice in 1991 and consumption of rice in America was amounted to 2,633 thousand tons. Exportable quantity of USA rice were estimated as 4,379 thousand tons of which 52.3%, 2,300 thousand tons, were exported indeed in the same year. 6. The quantity of Korean rice produced in 1991 was estimated 1.00% of the world production. The world amount of rice exported in 1991 was reached to 2.45% of the world production of which 34.2% was occupied by USA The remaining quantities of world exported rice were dominated by Tiland, Pakistan and Vietnam where produced indica variety. 7. Under the given technology, labour inputs per 10a for rice production could be possible to save by 70% of the national average labour requirement of 53.6 hours through implmenting complete farm mechanization with land consolidation and on-farm development and improvement of fanning practices like seedbroad casting txchnology etc. On the other hand, prduction costs of rice could be decreased by 10% rather than 49% as target indicated in the Rural Development Counter Measures of Korean Government in 1994 owing to increasing farm mechanization cost and interest on land service with high price. Accordingly production cost of rice per kg could be decreased only by 10% of the 1994 production cost. 8. Rice policy of Korean government in the future should take into account the labour saving technology to solve labour shortage in rural area and to enhance off-farm incomes by creating job opportunities in agro-industrial zones and special production area. On account of the staple food and main energy source for people's health, rice production even encountered vulnerable economic settings should be continued without price distortion policies and discouraging farmer's intention to cultivate rice by importing institutionally the direct income subsidy system.

• Korean Journal of Remote Sensing
• /
• v.21 no.6
• /
• pp.445-456
• /
• 2005

The land surface parameters should be determined with sufficient accuracy, because these play an important role in climate change near the ground. As the surface reflectance presents strong anisotropy, off-nadir viewing results a strong dependency of observations on the Sun - target - sensor geometry. They contribute to the random noise which is produced by surface angular effects. The principal objective of the study is to provide a database of accurate surface reflectance eliminated the angular effects from MODIS 250m reflective channel data over Korea. The MODIS (Moderate Resolution Imaging Spectroradiometer) sensor has provided visible and near infrared channel reflectance at 250m resolution on a daily basis. The successive analytic processing steps were firstly performed on a per-pixel basis to remove cloudy pixels. And for the geometric distortion, the correction process were performed by the nearest neighbor resampling using 2nd-order polynomial obtained from the geolocation information of MODIS Data set. In order to correct the surface anisotropy effects, this paper attempted the semiempirical kernel-driven Bi- directional Reflectance Distribution Function(BRDF) model. The algorithm yields an inversion of the kernel-driven model to the angular components, such as viewing zenith angle, solar zenith angle, viewing azimuth angle, solar azimuth angle from reflectance observed by satellite. First we consider sets of the model observations comprised with a 31-day period to perform the BRDF model. In the next step, Nadir view reflectance normalization is carried out through the modification of the angular components, separated by BRDF model for each spectral band and each pixel. Modeled reflectance values show a good agreement with measured reflectance values and their RMSE(Root Mean Square Error) was totally about 0.01(maximum=0.03). Finally, we provide a normalized surface reflectance database consisted of 36 images for 2001 over Korea.

• Science of Emotion and Sensibility
• /
• v.22 no.1
• /
• pp.23-34
• /
• 2019

The U-Healthcare era has evolved with the development of the Internet of things (IoT) in the early stages of being connected as a society. Already, many changes such as increased well-being and the extension of human life are becoming evident across cultures. Korea entered the growing group of aging societies in 2017, and its silver industry is expected to grow rapidly by adopting the IoT of a super-connected society. In particular, the senior shift phenomenon has resulted in increased interest in the promotion of the health and well-being of the emergent silver generation which, unlike the existing silver generation, is highly active and wields great economic power. This study conducted in-depth interviews to investigate the characteristics of the new silver generation, and to develop the design for a wearable serious game that intends to boost the interest of the elderly in exercise and fitness activities according to their personalized physical training regimes as prescribed by the U-Hospital service. The usage scenario of this wearable serious game for the 'U-silver generation' is derived from social necessity. Medical professionals can utilize this technology to conduct health examinations and to monitor the rehabilitation of senior patients. The elderly can also use this tool to request checkups or to interface with their healthcare providers. The wearable serious game is further aimed at mitigating concerns about the deterioration of the physical functions of the silver generation by applying personalized exercise prescriptions. The present investigation revealed that it is necessary to merge the on / off line community activities to meet the silver generation's daily needs for connection and friendship. Further, the sustainability of the serious game must be enhanced through the inculcation of a sense of accomplishment as a player rises through the levels of the game. The proposed wearable serious game is designed specifically for the silver generation that is inexperienced in using digital devices: simple game rules are applied to a familiar interface grounded on the gourmet travels preferred by the target players to increase usability.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.173-178
• /
• 2022

A lateral flow immunoassay (LFIA) method using carbon nanodot@silica as a signaling material was developed for analyzing the concentration of retinol-binding protein 4 (RBP4), one of the lung cancer biomarkers. Instead of antibodies mainly used as bioreceptors in nitrocellulose membranes in LFIA for protein detection, aptamers that are more economical, easy to store for a long time, and have strong affinities toward specific target proteins were used. A 5' terminal of biotin-modified aptamer specific to RBP4 was first reacted with neutravidin followed by spraying the mixture on the membrane in order to immobilize the aptamer in a porous membrane by the strong binding affinity between biotin and neutravidin. Carbon nanodot@silica nanoparticles with blue fluorescent signal covalently conjugated to the RBP4 antibody, and RBP4 were injected in a lateral flow manner on to the surface bound aptamer to form a sandwich complex. Surfactant concentrations, ionic strength, and additional blocking reagents were added to the running buffer solution to optimize the fluorescent signal off from the sandwich complex which was correlated to the concentration of RBP4. A 10 mM Tris (pH 7.4) running buffer containing 150 mM NaCl and 0.05% Tween-20 with 0.6 M ethanolamine as a blocking agent showed the optimum assay condition for carbon nanodot@silica-based LFIA. The results indicate that an aptamer, more economical and easier to store for a long time can be used as an alternative immobilizing probe for antibody in a LFIA device which can be used as a point-of-care diagnosis kit for lung cancer diseases.