• Journal of IKEEE
• /
• 제2권2호
• /
• pp.278-284
• /
• 1998

This paper describes a l0b CMOS A/D converter (ADC) for HDTV applications. The proposed ADC adopts a typical multi-step pipelined architecture. The proposed circuit design techniques are as fo1lows: A selective channel-length adjustment technique for a bias circuit minimizes the mismatch of the bias current due to the short channel effect by supply voltage variations. A power reduction technique for a high-speed two-stage operational amplifier decreases the power consumption of amplifiers with wide bandwidths by turning on and off bias currents in the suggested sequence. A typical capacitor scaling technique optimizes the chip area and power dissipation of the ADC. The proposed ADC is designed and fabricated in s 0.8 um double-poly double-metal n-well CMOS technology. The measured differential and integral nonlinearities of the prototype ADC show less than ${\pm}0.6LSB\;and\;{\pm}2.0LSB$, respectively. The typical ADC power consumption is 119 mW at 3 V with a 40 MHz sampling rate, and 320 mW at 5 V with a 50 MHz sampling rate.

• Journal of the Korean Electrochemical Society
• /
• 제11권4호
• /
• pp.268-272
• /
• 2008

$LiFePO_4$ material was synthesized by electrospinning method to obtain optimal particle size($50{\sim}100\;nm$) without carbon coating or ball milling. This material showed an orthorthombic structure with Pnma space group without any impurities, such as FeP or $Fe_2P$, in the XRD pattern. The particle morphology and particle shape were observed by SEM analysis. Li/$LiFePO_4$ cell showed a high initial discharge capacity of 135 mAh/g, at current density of $0.1\;mA/cm^2$ with a cut-off voltage of 2.8 to 4.0V. This cell exhibited a perfect cycle performance over 99.9% cycle retention rate up to 50 cycles.

• Clinical and Experimental Reproductive Medicine
• /
• 제42권4호
• /
• pp.143-148
• /
• 2015

Objective: The aim of the current study was to determine the predictive value of anti-$M{\ddot{u}}llerian$ hormone (AMH) levels for pregnancy outcomes in patients over 40 years of age who underwent in vitro fertilization or intracytoplasmic sperm injection-embryo transfer (IVF/ICSI-ET) cycles. Methods: We retrospectively analyzed the medical records of 188 women aged 40 to 44 years who underwent IVF/ICSI-fresh ET cycles due to unexplained infertility in the fertility center of CHA Gangnam Medical Center. Patients were divided into group A, with AMH levels <1.0 ng/mL (n=97), and group B, with AMH levels ${\geq}1.0ng/mL$ (n=91). We compared the clinical pregnancy rate (CPR) in the two groups and performed logistic regression analysis to identify factors that had a significant effect on the CPR. Results: The CPR was significantly lower in group A than group B (7.2% vs. 24.2%, p<0.001). In multivariate logistic regression analysis, AMH levels were the only factor that had a significant impact on the CPR (odds ratio, 1.510; 95% confidence interval, 1.172-1.947). The area under the receiver operating characteristic curve for AMH levels as a predictor of the CPR was 0.721. When the cut-off level of AMH was set at 1.90 ng/ mL, the CPR was 6.731-fold higher in the group with AMH levels ${\geq}1.90ng/mL$ than in the group with AMH levels <1.90 ng/mL (p<0.001). Conclusion: Our study showed that AMH levels were predictive of clinical pregnancy in infertility patients over 40 years of age. Further prospective studies should be conducted to validate the predictive capability of AMH levels for the outcome of clinical pregnancy.

• Journal of Adhesion and Interface
• /
• 제21권3호
• /
• pp.107-112
• /
• 2020

Recently, the atomically thin transition-metal dichalcogenide (TMD) semiconductors have attracted much attention owing to their remarkable properties such as tunable bandgap with high carrier mobility, flexibility, transparency, etc. However, because these TMD materials have a significant drawback that they are easily degraded in an ambient environment, various attempts have been made to improve chemical stability. In this research article, I report a method to improve the air stability of WSe₂ one of the TMD materials via surface passivation with an h-BN insulator, and its application to field-effect transistors (FETs). With a modified hot pick-up transfer technique, a vertical heterostructure of h-BN/WSe₂ was successfully made, and then the structure was used to fabricate the top-gate bottom-contact FETs. The fabricated WSe₂-based FET exhibited not only excellent air stability, but also high hole mobility of 150 ㎠/Vs at room temperature, on/off current ratios up to 3×10⁶, and 192 mV/decade of subthreshold swing.

• Geophysics and Geophysical Exploration
• /
• 제7권2호
• /
• pp.136-147
• /
• 2004

In this study, the characteristics of magnetotelluric (MT) responses due to a three-dimensional (3-D) body are analyzed with 3-D numerical modeling. The first model for the analysis consists of a single isolated conductive body embedded in a resistive homogeneous half-space. The second model has an additional conductive overburden while the other conditions remain the same as the first one. The analysis of apparent resistivities shows well that the 3-D effects are dominant over some frequency range for the first model. Two mechanisms, current channeling and induction, for secondary electric fields due to the conductive body are analyzed at various frequencies: at high frequencies induction is more dominant than channeling, while at low frequencies channeling is more dominant than induction. Tippers have a strong relation to the position of anomalous body and the real and imaginary parts of induction vector also indicate the position of anomalous body. off-line conductive anomaly sometimes causes severe problem in 2-D interpretation. In such case, induction vector analysis can give information on the existence and location of the anomalous body. Each parameter of the second model shows similar responses as those of the first model. The only difference is that the magnitude of all parameters is decreased and that the domain showing the 3-D effects becomes narrower. As shown in this study, the analysis of 3-D effects provides a useful and effective means to understand the 3-D subsurface structure and to interpret MT survey data.

• Korean Security Journal
• /
• 제19호
• /
• pp.1-21
• /
• 2009

Manpower demand forecasting in private security industry can be used for both policy and information function. At a time when police agencies have fewer resources to accomplish their goals, forming partnership with private security firms should be a viable means to choose. But without precise understanding of each other, their partnership could be superficial. At the same time, an important debate is coming out whether security industry will continue to expand in numbers of employees, or level-off in the near future. Such debates are especially important for young people considering careers in private security industry. Recently, ARIMA model has been widely used as a reliable instrument in the many field of industry for demand forecasting. An ARIMA model predicts a value in a response time series as a linear combination of its own past values, past errors, and current and past values of other time series. This study conducts a short-term forecast of manpower demand in private security industry using ARIMA model. After obtaining yearly data of private security officers from 1976 to 2008, this paper are forecasting future trends and proposing some policy orientations. The result shows that ARIMA(0, 2, 1) model is the most appropriate one and forecasts a minimum of 137,387 to maximum 190,124 private security officers will be needed in 2013. The conclusions discuss some implications and predictable changes in policing and coping strategies public police and private security can take.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제26권3호
• /
• pp.265-274
• /
• 1990

The temperature inversions were studied on the basis of Digital Memory Bathythermography(DBT) data collected by training ship, Pusan 402, of the National Fisheries University of Pusan in August 23~25, 1986 and Fisheries Reserach and Development Agency of Korea in August, 1986, The results were as follows; Among the 67 stations of studied area, occurrence frequency of temperature inversion was 58.20%, And the frequency of onefold occurrence of temperature inversion at its profile of each station was 13.42%. of twofold occurrence was 20.80%, and of threefold occurrence was 23.88%. In the studied area, the temperature inversion usually occurred below the 40m depth and its layers also located below the thermocline. The temperature range of its inversion was from 14$^{\circ}C$ to 16$^{\circ}C$. The temperature inversion in the study area was oaused by the interaction between Tsushima Warm Current and Korea Coastal Waters.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제14권1호
• /
• pp.259-264
• /
• 2014

IEEE 802.15.4 has been emerging as the popular choice for various monitoring and control applications. In this paper, a fault management system for DC power-lines has been designed using IEEE 802.15.4, in order to monitor DC power-lines in real time, and to rapidly detect faults and shut off the line where such faults occur. Numbers were allocated for each node and unslotted CSMA-CA method of IEEE 802.15.4 was used, the performance of which was analyzed by a simulation. For such purpose, a total of 60 bits of the control data consisting of 16 bits of the current, 16 bits of the amplitude, 28 bits of the terminal state data were sent out, and the packet transfer rate and the transmission delay time of the fault management system for DC power-lines were measured and analyzed. When the traffic load was 330 packets per second or lower, the average delay time was shown to be shorter than 0.02 seconds, and when the traffic load was 260 packets per second or lower, the packet transfer rate was shown to be 99.99% or higher. Therefore, it was confirmed that the stringent condition of US Department of Energy (DOE) could be satisfied if the traffic load was 260 packets per second or lower, The results of this study can be utilized as basic data for the establishment of the fault management system for DC power-lines using IEEE 802.15.4.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제49권11호
• /
• pp.24-35
• /
• 2012

In this paper, we propose a dynamic lane control scheme with a traffic predictor module and a rate controller for reconciling with commercial optical PHY modules in energy efficient optical Ethernet systems. The commercial high speed optical Ethernet system capable of 40/100Gbps employs 4 or 10 multiple optical transceivers over WDM or multiple optical links. Each of the transceivers is always turned on even if the link is idle. To save energy, we propose the dynamic lane control scheme. It allows that several links may be entirely turned off in a low traffic load and frames are handled on the remaining active links. To preserve the byte order even if the number of active links may be changed, we propose a rate controller to be sat on the reconciliation sublayer. The main role of the controller is to insert null byte streams into the xGMII of inactive lanes. For the PHY module, the null input streams corresponding to inactive lanes will be disregarded on inactive PMDs. It is very handy to implement the rate controller module with MAC in FPGA without any modification of commercial PHYs. It is very crucial to determine the number of active links based on the fluctuated traffic load, we provide a simple traffic predictor based on both the current transmission buffer size and the past one with different weighting factors for adapting to the traffic load fluctuation. Using the OMNET++ simulation framework, we provide several performance results in terms of the energy consumption.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제44권4호
• /
• pp.24-31
• /
• 2007

Up to date, a lot of bus protocol and bus architecture are released though most of them are based on the shared bus architecture and inherit the limitation of performance. SNP (SoC Network Protocol), and hence, SNA (SoC Network Architecture) which are high performance on-chip-bus protocol and architecture, respectively, have been proposed to solve the problems of the conventional shared bus. We refine the SNA specification and improve the performance and functionality. The performance of the SNA is improved by supporting simultaneous routing for bus request of multiple masters. The internal routing logic is also improved so that the gate count is decreased. The proposed SNA employs XSNP (extended SNP) that supports almost perfect compatibility with AMBA AHB protocol without performance degradation. The hardware complexity of the improved SNA is not increased much by optimizing the current routing logic. The improved SNA works for IPs with the original SNP at its best performance. In addition, it can also replace the AMBA AHB or interconnect matrix of a system, and it guarantees simultaneous multiple channels. That is, the existing AMBA system can show much improved performance by replacing the AHB or the interconnect matrix with the SNA. Thanks to the small number of interconnection wires, the SNA can be used for the off-chip bus system, too. We verify the performance and function of the proposed SNA and XSNP simulation and emulation.