• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1999년도 추계학술대회논문집
• /
• pp.243-252
• /
• 1999

Recently several research groups using CORMIX, approved by EPA, have been working on the hydrodynamic mixing processes due to the ocean discharges. It provides a useful tool for analyzing near field mixing characteristics through the outfall system. This paper applies CORMIX 1 & 2 to the Pusan Jungang Effluent Outfall System, which is planned to be in the Gamchun harbour and will be completed in 2011. This model output shows the trajectoral variation of dilution and concentration for three cases of outfall system. Dilution differences have been simulated and found the highest dilution condition under the different displacement of outfall system. On the basis of these outputs it will be proposed the optimum outfall system type and location. This approach might contribute on protecting the serious water quality problem due to the ocean discharge.

• 한국항만학회지
• /
• 제14권2호
• /
• pp.241-249
• /
• 2000

The amount of municipal water has been increased rapidly up to now and it is necessary to treat and dispose the wastewater effectively. The recent trend of the effluent disposal system, after treatment, show a nearshore discharge which has an outfall with length somewhere between the shoreline discharge and an extended deepwater outfall. There is no universal solution to municipal water treatment and disposal and each case must be examined on its merits and on economic, technical and environmental bases. In this study we focused mostly on the scientific and engineering aspects of ocean disposal through the outfall. For this purpose, we made an investigation to the near-field characteristics of discharged water and made some comparison with the existing experimental results. We also applied it to the Pusan Jungang Effluent Outfall System, which is planned to build in the Gamchun harbour and will be completed in 2011. The model output showed the trajectoral variation of dilution and mixing behavior for three cases of outfall system. Dilution differences have been simulated and found the highest dilution condition under the different displacement of outfall system. On the basis of these outputs it will be proposed the optimum outfall system type and location.

• 한국항만학회지
• /
• 제14권3호
• /
• pp.361-371
• /
• 2000

A demand of marine outfall system has been much increased for the effective disposal of the wastewater due to population and industrial development at the coastal areas. The outfall system discharges primary or secondary treated effluent into the coastline, or at the deep water, or between these two. The discharge is carried out by constructing a pipeline on the sea bed with a diffuser or with a tunnel, risers and appropriate. The effluent, which has a density similar to that of fresh water, rises to the sea surface forming plume or jet, together with entraining the surrounding salt water and becomes very dilute. Thus there have been growing interests about plume behaviour around the outfall system. Plume or jet discharged from single-port or multi-port diffuser might cause certain impacts on coastal environment. Near field mixing characteristics of discharged water field using CORMIX model have been studied for effective outfall design various conditions on ambient current, depth, flow rate, effluent concentration, diffuser specification, port specification etc.. This kind of analysis is necessary to deal with water quality problems caused by the ocean discharge. The analyzed result was applied to the Pusan Jungang effluent outfall system plan.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.85.2-93
• /
• 2000

A demand of marine outfall system have been much increased for the effective disposal of the wastewater due to population and industrial development at the coastal areas. The outfall system discharges primary or secondary treated effluent into coastline or at the deep water, or between these two. The discharge is carried out by constructing a pipeline on the sea bed with a diffuser or with a tunnel, risers and appropriate. The effluent, which has a density similar to that of fresh water, rises to the sea surface forming plume or jet, together with entraining the surrounding salt water and becomes very dilute. Thus there have been growing interests about plume behaviour around the outfall system. Plume or jet discharged from single-port or multi-port diffuser might cause certain impacts on coastal environment. Near field mixing characteristics of discharged water field using CORMIX model with has been studied for effective outfall design various conditions on ambient current, depth, flow rate, effluent concentration, diffuser specification, port specification etc.. This kind of analysis is necessary to deal with water quality problems caused by the ocean discharge. The analyzed vesult was applied to the Pusan Jungang dffluent outfall system plan.

• 한국해양환경ㆍ에너지학회지
• /
• 제3권3호
• /
• pp.41-49
• /
• 2000

수역의 수질개선을 위하여 생활하수, 산업폐수를 처리할 때 주로 BOD 또는 COD를 저하시키는데 주안점을 두어왔으나 제거되지 않은 질소와 인의 유입으로 인하여 해역은 부영양화가 진행되고 있다. 따라서 향후 수질을 개선하기 위해서는 조류증식의 제한인자인 질소와 인의 처리가 필요하다. 고차처리를 적용할 경우보다 건설비용과 유지관리비가 적게 소요되는 해중방류(Ocean Outfall)을 적용하였을 때 그 효과를 검토하였다. 남부하수처리장 2차처리수를 해중 방류했을 때 수영만 전역에 미치는 영향을 far-field 모델인 생태-유체역학 모델을 이용하여 예측한 결과, 과거 남부하수처리수가 해수면에 유입되던 용호만의 수질은 많은 개선을 보였으나 방류관 주변에서 무기질소와 인의 농도가 해역환경기준 III등급으로 적조나 부영양화의 가능성이 있는 것으로 나타났다.

• 한국해양환경ㆍ에너지학회지
• /
• 제12권3호
• /
• pp.124-132
• /
• 2009

하수의 해양방류시스템의 형식과 방류위치 결정을 위해 해수유동모의, 근해역 희석률 모의 그리고 원해역 확산모의가 수행되었다. 방류 후보지점 주변의 조위와 조류는 관측조위 및 조류를 잘 재현하는 2차원 유한요소모형에 의해 수행되었으며, 계산된 조위 및 조류 모의결과에 기초하여 방류 후보지점이 결정되었다. 방류시스템으로는 단일확산관과 다공확산관이 고려되었다. 단일확산관과 다공확산관을 통한 하수 방류의 근역 확산이 CORMIX모형에 의해 검토되었으며, 원역 확산이 2차원 Random-walk 확산모형에 의해 실시되었다. 모의결과로부터 수심, 조류, 방류위치, 방류속도, 확산관 길이 등이 확산범위와 희석률에 미치는 영향이 다각도로 검토되었다.

• Water Engineering Research
• /
• 제1권4호
• /
• pp.309-320
• /
• 2000

In this study, laboratory study of the behavior of wastewater discharged from the Boston ocean outfall was compared with the predictions of mathematical models. The dta sets cover broad ranges of discharge conditions and oceanic conditions, and are associated with a typical type of outfall discharges with multiport diffusers. The laboratory data sets were obtained in density stratified towing tanks. These data sets were used to evaluate four commonly used models: UM, UDKHDEN, RSB and CORMI$\times$2 for minimum dilution, the height to the top of the wastefield, and wastefield thickness. For minimum diluation and height to the top of the wastefield, UM and RSB predictions agree well with laboratory data. UDKHDEN overestimated the minimum dilution and height to the top of the wastefield while CORMI$\times$2 underestimated these values. All of the model predictions for the wastefield thickness were widely scattered. about the measured values. The hydraulic model study reproduced the major features observed in the laboratory. It also afforded considerable insight into the mechanics of mixing of multiport risers which could not have been obtained either from the laboratory test or the mathematical models.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.247-253
• /
• 2004

As a large scale port development in coastal waters proceeds step by step and populations in the vicinity of port are getting increased, the issue on "how to dispose the treated municipal water and wastewater in harbor" brings peoples′ concern. The submarine outfall system discharges the primary or secondary treated effluent at the coastline or in deep water, or between these two. The effluent, which has a density similar to that of fresh water, rises to the sea surface forming plume or jet, together with entraining the surrounding sea water and becomes very dilute. We intended in this paper to investigate the impact on dilution of effluent and the behavior of flume under the conditions of the seasonal and spatial temperature variations, which have not been noticeable in designing effective marine outfall system. To predict and analyze the behaviour and dilution characteristics of plume not just with the effluent temperature, but also with the seasonal variation of temperature of surround water and tidal changes, CORMIX(Cornell Mixing Zone Expert System)-GI have been applied. The results should be used with caution in evaluation the mixing zone characteristics of discharged water. We hope to help for the effective operation of outfall system, probable outfall design, protection of water quality, and warm water discharges from a power plant, etc.

• 한국항해항만학회지
• /
• 제28권3호
• /
• pp.259-268
• /
• 2004

지난 몇 년 동안, 해안지역에서 산업의 발달과 인구증가로 인해서 육지에서 방출되는 오폐수의 정화 처리 방법이 중요한 문제점으로 지적되고 있다. 처리방법으로는, 1차 처리 또는 2차 처리된 것을 수중 방류관을 통해 해안이나 심해 또는, 그 중간지점에서 방출되는데, 오폐수가 방출되면 주변의 해수를 연행하여 플룸, 제트 또는 부양성 제트의 형태로 해수면까지 상승하면서 많이 희석된다. 본 연구는 해양환경관리 및 오폐수 처리에 관한 의사결정과정에서 중요한 해양방류관 설계를 다룬다. Cormix 모델에 조위의 변화와 계절변화에 의한 몇가지 요소를 고려하여 방류수의 궤적과 희석을 다룬다. 본 연구는 방류수의 효과석인 관리를 위한 기본 데이터와 일반배치에 매우 유용하게 활용될 것이다.

• 한국해안해양공학회지
• /
• 제17권4호
• /
• pp.259-268
• /
• 2005

여름에 기본적으로 방조제 내부로부터 담수의 유입으로 발생된 저 간소 수괴가 저서생물의 감소를 야기시키기 때문에 영산강 하구언에서 저 산소층의 제거에 대한 관심이 증폭되어왔다. 처리된 하$\cdot$ 폐수를 해양에 방류하는 해양방류시스템이 이러한 저 산소층을 제거하는 효율적이고 경제적인 방법으로 이용되어 질 수 있다. 본 연구에서는 근역에서 방류된 부력제트의 거동을 예측하고자 적절한 방류구의 설계가 제안되었다. 신뢰할 수 있는 부력제트의 거동에 대한 계산을 수행하기 위하여 측정된 CTD와 해류 자료 등을 포함한 인자들이 고려되어졌다. 조석의 주기에 따라 계산된 부력제트의 경계 내에 염분도와 용존산소의 횡분포의 변화를 예측하고자 여러 수치 모형중의 하나로 EPA에 의해 승인된 CORMIX 1 모형을 사용하였다. 수치실험의 결과를 기준으로 볼 때 단공방류구가 저 산소층을 제거하는데 유용한 시스템임을 알 수 있었다. 원활한 주변수의 조건을 만족시키기 위하여 적절한 전략이 또한 제안되어졌다.