• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.1
• /
• pp.13-20
• /
• 2019

Objective: This study was performed to propose a domestic occupational exposure limit(OEL) following a health hazard assessment, calculation of a non-carcinogenicity reference concentration worker($RfC_{worker}$) value, and examination of international agencies' exposure limits. It also recommends legal management within the Occupational Safety and Health Act for PHMG-Phosphate(CAS No. 89697-78-9), It is a humidifier disinfectant that generated many lung injuries. Methods: We have investigated the recommendation or guidelines of foreign OEL for PHMG-Phosphate and the actual state of legal management in Korea. To examine the procedures and methods for recommendation OEL. Toxicological hazard and health hazard classifications were examined and a non-carcinogenicity $RfC_{worker}$ value was calculated for PHMG-Phosphate. An OEL and the necessity of legal management were recommended as well. Results and Conclusions: The OEL for PHMG-Phosphate is recommended to be $0.01mg/m^3$. The recommended OEL is close to 10 times the RfCworker value of $0.000833mg/m^3$ calculated from the chemical dose-response hazard assessment, which is a 2017 study. The CMIT/MIT(3:1) mixture, which was a social issue as a humidifier disinfectant substance, was also exposed to the same ratio in March 2018, establish the OEL. It is recommended to establish OEL for PHMG-Phosphate to prevent worker health hazards and for chemical safety management.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.3
• /
• pp.147-155
• /
• 2010

This study was conducted to investigate the benzene exposure levels in coal chemical and petrochemical refining industries during BTX turnaround (TA) processes where benzene was being produced. Three companies producing benzene were selected, one coal chemical and two petrochemical industries. TA processes were classified into three stages: shut down, maintenance, and start up. Data was analyzed by classifying the refining method into 2 groups (Petrochemistry, Coal chemistry) for 823 workers. Comparing the data from petrochemical industries with data from a coal chemical refining industry, while benzene concentration levels of long-term samples during TA were not statistically different (p> 0.05), those levels of short-term samples were significantly different (p< 0.001). About 4.79 % of data in petrochemical industries exceed the occupational exposure limits (OELs) of benzene, 1 ppm. In a coal refining methods, about 15.7% exceeded the benzene OELs. The benzene concentrations in maintenance and start up stage of TA for petrochemical refineries were higher than those in a coal chemical refinery (p <0.01). These findings suggest that the coal chemical refining site requires more stringent work practice controls compare to petrochemical refining sites during TA processes. Personal protective equipments including organic respirators should be used by TA workers to protect them from benzene overexposure.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.1
• /
• pp.91-102
• /
• 2014

Objectives: This study was performed in order to devise a procedure for supplementing the Special Management Materials in the Occupational Safety and Health Act and recommend candidate materials. The results are expected to be used as fundamental data for classification and criteria necessary to manage Special Management Materials in workplaces. Also, they are expected to be used as a basis for selecting target materials to nominate as additional Special Management Material. Methods: We investigated the selection standards for candidates and review ranges of data sources to nominate Special Management Materials. The substances classified as GHS(Globally Harmonized System of classification and labeling of chemicals) category 1A(known to have carcinogenic potential and reproductive toxicity for humans) or 1B(presumed to have carcinogenic potential and reproductive toxicity for humans) carcinogens and reproductive toxicants among the Controlled Hazardous Substances of the Regulation on Occupational Safety and Health Standards and substances with OELs(Occupational Exposure Limits) were inspected as the candidates for Special Management Materials. Conclusions: A seven-step procedure for selecting candidates to designate as Special Management Materials was suggested, including the setting of target chemicals for evaluation, classification of CMR(Carcinogens, Mutagens or Reproductive toxicants) by GHS classification and criteria, suggestion and selection of the candidates, and more. This study recommends 58 chemicals as qualified candidates to supplement the Special Management Materials.

• Journal of Environmental Health Sciences
• /
• v.37 no.4
• /
• pp.267-278
• /
• 2011

Objectives: A great number of hazardous agents can be emitted from various types of art-creation in a fine arts college, but little data on exposure assessment has been published. A variety of processes encompassing toxic or non-toxic materials, tools, and components are involved in a sculptor work at a fine art college. The aim of this study was to assess exposure levels to particulates and noise during sculpture classes in a college of fine arts. Methods: Students in sculpture classes participated in this study. Mass, number, and surface area concentrations of particulates, noise level, temperature and relative humidity were monitored by both personal and area sampling during the tasks of metal, wood, and stone sculpting. Results: The number and surface concentration of particulates was the highest in the task of wood sculpting, followed by metal and stone work. The mass concentration of particulates was the highest in stone sculpting (personal GM 3.0 mg/$m^3$, GSD 3.0), followed by wood (personal GM 1.5 mg/$m^3$, GSD 1.8) and metal work (personal GM 0.95 mg/$m^3$, GSD 1.51) in that order. Occupational exposure limits (OEL) for particulates depends on the type of particulate. For wood dust, 86% (six subjects) of the personal samples and all area samples exceeded the Korean OEL for wood dust (1 mg/$m^3$), while 20% (two subjects) among stone sculpting students were exposed above the Korean OEL (10 mg/$m^3$). In contrast, metal sculpting did not exceed the OEL (5 mg/$m^3$). For noise level, metal sculpting students (Leq 95.1 dB(A) in the morning, 85.3 dB(A) in the afternoon) were exposed the most, followed by stone sculpting (88.3 dB(A)), and wood sculpting (84.8 dB(A)) in that order. Compared with the 90 dB(A) of the Korean OEL and 85 dB(A) of the American Conference of Governmental Industrial Hygienists' threshold limit value (ACGIH-TLV) for noise, 100% of the subjects (five subjects) and area samples during metal sculpting in the morning session exceeded both OELs, but only three subjects (60%) exceeded the ACGIH-TLV in the afternoon session. For stone sculpting, 50% (one subject) and 100% (two subjects) exceeded the Korean OEL and ACGIH-TLV, respectively, but the area sample did not exceed either OEL. During wood sculpting, two subjects (40%) exceeded ACGIH TLV. Conclusions: This work evaluated the sculptors' exposure to particulate matter and noise in fine art college, and revealed a poor working environment for the participating students. Effective measures should be supplemented by the administration of colleges.