• 대한안전경영과학회지
• /
• 제18권3호
• /
• pp.63-70
• /
• 2016

The main point of this study is to find out duplicates and differences among various regulations from different organizations. Also, it focuses on creating a reasonably unified regulation system to standardize safety & environment management. In this study, I analyzed the commonalities and the differences of two systems which are typical korean Process Safety Management System and off-site Consequence Analysis. It is confirmed that there are 25 species of overlapped material of those two systems and assessment like handling material information, facilities lists, hazardous substances and list of machine power. Process safety report focuses on onsite workers and facility protect. On the other hand, off-site Consequence Analysis focuses on design, arrangement and management of handling facility from off-site influence. I found difference two system of Enforcement purposes and way. Contradiction of Harmful information of Chemicals Control Act and occupation safety and health acts from same material. To be specific, There are no unit rule of occupation safety and health acts. so it permit inch, psi etc. But Chemicals Control Act provides that m, Mpa units. Therefore, Each regulatory duplication of items for chemicals management, standardization is writing so that you can coordinate overlapping items in the measures the need to be presented.

• 한국안전학회지
• /
• 제29권3호
• /
• pp.46-55
• /
• 2014

With regard to the basic safety and health education in construction industry issued on January, 26, 2012 by Occupation Safety And Health Acts, this study conducted a survey with self-administered questions for workers in the construction field in order to comprehend the problems since introduction of basic safety and health education. By analyzing the effectiveness of the safety and health activities, this study sought to reduce the trials and errors as well as to secure the improvement toward the early settlement of the basic safety and health education in construction industry. As a result of the question investigation, the survey respondents in the field sites who finished the basic safety and health education showed positive attitudes toward the improvement of safety awareness and the prevention of accidents. They also needed constant implementation of the education. At the same time, the government should improve the education program with strong policies to secure the effectiveness of the basic safety and health education in construction industry.

• 방사선산업학회지
• /
• 제11권1호
• /
• pp.39-45
• /
• 2017

A cyclotron is a kind of particle accelerator that produces a beam of charged particles for the production of medical, industrial, and research radioisotopes. More than 30 cyclotrons are operated in Korea to produce $^{18}F$, an FDG synthesis at hospitals. A 30-MeV cyclotron was installed at ARTI (Advanced Radiation Technology Institute, KAERI) mainly for research regarding isotope production. In this study, we analyze and estimate the items of risk such as the problems in the main components of the cyclotron, the loss of radioactive materials, the leakage of coolant, and the malfunction of utilities, fires and earthquakes. To estimate the occurrence frequency in an accident risk assessment, five levels, i.e., Almost certain, Likely, Possible, Unlikely, and Rare, are applied. The accident consequence level is classified under four grades based on the annual permissible dose for radiation workers and the public in the nuclear safety law. The analysis of the accident effect is focused on the radioactive contamination caused by radioisotope leakage and radioactive material leakage of a ventilation filter due to a fire. To analyze the risks, Occupation Safety and Health Acts is applied. In addition, action plans against an accident were prepared after a deep discussion among relevant researchers. In this acts, we will search for hazard and introduce the risk assessment for the research 30-MeV cyclotron facilities of ARTI.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.665-671
• /
• 2019

The estimated on-site accident rate in Forestry is relatively high. According to statistics of the accident, in the recent 5 years, from 2014 to 2018, forestry accidents have resulted in 98% of injuries and 87% of fatalities. Especially, there are significant geographical constraints to access to the scene in case of an accident. Even though the capacity of first aid capacity is notably emphasized its importance to minimize the scale of damages, the relevant employees have been educated only basic first aid, which is not considered circumstances or geographic limitations, by Occupation Safety and Health Acts. Therefore, the purpose of this study is to derive a direction for a forest emergency service system to increase forestry workers' survival and prevent secondary injury through securing 'Golden Time.' This study conducts analyzing relevant laws and regulations in domestic and international settings as well as looking at several concerned accident cases. The outcome of analysis presents an issue regarding the implementation of onsite first aid in forestry and existing risk factors depending on the working process. Finally, we suggest two ways to improve the forest emergency service that are 1) an appropriate curriculum and kit for forest first aid; and 2) a system for emergency transfer through sharing information between National Fire Agency (NFA) and emergency medical service center, and emergency and rescue mission using helicopter from NFA and Korea Forest Service.

• 한국안전학회지
• /
• 제34권3호
• /
• pp.83-88
• /
• 2019

The 7,993 cases of Survey Report of Fatal Industrial Accidents conducted jointly by the MEOL and the KOSHA for the recent seven years(2007-2013) were categorized according to personal and occupational characteristics, industry types, business sizes, job types, activities at the time accident, types of accidents, material agents(assailing materials), unsafe conditions, and unsafe acts. And it is found that among the 72.2 percent of fatal occupational accidents in the construction and manufacturing industries are caused by falling, sticking, bumping and being caught under objects & overturning. For this study, through the empirical analysis on causes of fatal industrial accidents, was used to identity high risk groups based on total data of 7,993 victims of occupational accidents. An annual fatal occupational injury (FOI) rate per 10,000 workers was about 0.47‱. The middle-aged group and the elderly group showed the highest FOI rates per 10,000 workers (0.73‱, 0.80‱), and the daily workers showed the highest FOI rate (1.46‱), and the craft and related trades workers showed the highest FOI rate (2.17‱). In case of industry type the mining industry (7.26‱) showed the highest FOI rate, followed by the sewerage, waste management, materials recovery and remediation activity industry (3.91‱) and the construction industry (2.71‱). The primary high risk target group that requires a strategy designed to reduce fatal occupation injuries caused by falling and bumping & contact(collision) is the construction industry, and the secondary high risk target group in the construction industry is classified as the equipment, machine operating and assembling workers in the construction industry, those aged 50 years old and above need the prevention measures against bumping & contact(collision) and being caught under an object & falling(objects), while those aged less than 50 years old need prevention measures against falling(persons).

• 한국건축시공학회지
• /
• 제18권5호
• /
• pp.479-488
• /
• 2018

폐기물 및 이의 재활용 문제는 전 세계적인 환경문제로 인식되고 있으며, 플라스틱 폐기물은 인류의 목숨을 위협하는 가장 큰 사회적 문제로 인식되고 있다. 수직보호망도 플라시틱 수지를 사용하여 제조되는 것으로서 건설현장에서는 거푸집 공법 시공시 바깥면에 설치하여 낙하물 및 먼지의 비산 등을 방지하기 위하여 수직으로 설치하는 것으로서 본 연구에서는 건설현장에서의 수직보호망의 사용실태 파악과 최근 강화되고 있는 건설현장에서의 환경관련 규정의 변화와 이에 따른 현장기술자들의 인식을 제고하기 위함을 목적으로 진행하였다. 그리고 이를 바탕으로 건설현장에서 플라스틱수지를 사용하여 제조되어 무분별하게 사용되고 있는 수직보호망의 재질에 따른 합리적이고 친환경적인 자재의 사용과 이에 따른 수직보호망의 재활용을 촉진하기 위한 방안을 제시하고자 한다.