• Journal of the Korean Institute of Navigation
• /
• v.19 no.2
• /
• pp.77-97
• /
• 1995

The protection of the marine environment is one of the main international legal problems in recent years. In parallel with the industrial development, a great quantity of chemical materials were used and in consequence, mass transportation of oil and other dangerous materials was required on the one hand, and discharge of industrial wasters drew also the attention on the other hand. Furthermore, oil tankers accidents, mass use of nuclear materials, sea-bed exploration and exploitation stimulated further deep human concern on the marine environment. The expansion of international concern to new and more dangerous sources of marine pollution regarded more strict and legal control on the Oil Tanker(DWT 95, 000tons, Cb=0.805) model. Calculation results are compared to the international, especially regional level. In particular, this study is concerned with the preservation of the Northeast Asian Seas surrounded by Japan, the Russian Far East, South Korea, North Korea, China and Taiwan. These adjacent countries must intensify cooperation regarding the prevention, reduction and control of the contamination of the sea. And this cooperation between the States concerned should, as much as possible, be aimed at maximizing the effectiveness of measures to prevent or abate transboundary environmental pollution. To achieve this purpose, States concerned should be imposed upon duties such as duty to assess the environmental impact, duty to inform, duty to consult and duty to assist on the basis of general principle of international law, international customary law and other various resolutions of international bodies. Depending on the nature and extent of actual or potential transboundary pollution with the use of a natural resource or the environment in general the establishment of some form of institutionalized cooperation between the States concerned may become useful or indispensable. The functions of this Organization are, inter alia, to keep the implementation of the Convention and the protocals under continuous observation, to make recommendations on regional or sub-regional rules and standards to be elaborated and on measures to be taken by the Contracting Parties, to be notified of any grave and imminent danger from pollution or threat of pollution by the Contracting Parties and to promote in close cooperation with appropriate governmental bodies additional measures to protect the marine environment of the Northeast Asian Seas, and so on. Above mentioned countries, first of all, are located within the Northeast Asian Seas geographically and, therefore, take responsibilities of preserving the clean sea against marine interferences regardless of any difference of the social, political and economic systems. They must be followed under the UNCLOS and other marine conventions. Under the present circumstances, Northeast Asian Seas will become dead seas in case that there is no instant and prompt action against pollution. Hence we have an absolute obligation to promote the development of the mandatory international environmental law, which in turn can faciliate more effective implementation of the regional cooperation by the neighbouring states within this area.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.145-157
• /
• 2017

Currently, the height of ships that can pass under Busan Harbor Bridge is limited to 60m or shorter, so that large-sized ships of 60m or taller cannot use Busan Harbor international passenger terminal. Accordingly, this study has developed a service which measures continuously the change of bridge height by water level changes and provides such in real-time for safe bridge passage of large-sized ships of 60m or taller. The measurement system comprised of high-precision laser distance measurement device, GPS sensor, optical module, and damping structure is used to measure the bridge height change according to tide level changes, and the measured information is provided in real-time through cloud-based mobile app. Also, in order to secure objective bridge height data for changes to height limits and navigation supports, the observation data was analyzed and forecast model was drawn. As a result, it became an objective evidence to revise the passage height rules of the Busan Port Bridge from 60 meters to 63 meters.

• Journal of Wetlands Research
• /
• v.7 no.4
• /
• pp.97-107
• /
• 2005

As the distributed model is developed and widely used, the accuracy of a rainfall measurement and more dense rainfall observation network are required for the reflection of various spatial properties. However, in reality, it is not easy to get the accurate data from dense network. Generally, we could not have the proper rainfall gages in space and even we have proper network for rainfall gages it is not easy to reflect the variations of rainfall in space and time. Often, we do also have missing rainfall data at the rainfall gage stations due to various reasons. We estimate the distribution of mean areal rainfall data from the point rainfalls. So, in the aspect of continuous rainfall property in time, we should fill the missing rainfall data then we can represent the spatial distribution of rainfall data. This study uses the Fuzzy-Genetic algorithm as a interpolation method for filling the missing rainfall data. We compare the Fuzzy-Genetic algorithm with arithmetic average method, inverse distance method, normal ratio method, and ratio of distance and elevation method which are widely used previously. As the results, the previous methods showed the accuracy of 70 to 80 % but the Fuzzy-Genetic algorithm showed that of 90 %. Especially, from the sensitivity analysis, we suggest the values of power in the equation for filling the missing data according to the distance and elevation.

• Journal of Wetlands Research
• /
• v.22 no.3
• /
• pp.187-193
• /
• 2020

The increase in the area of impervious water due to the recent abnormal weather conditions and rapid urbanization led to a decrease in the amount of low current, resulting in an increase in the amount of surface runoff. Increased surface runoff is causing erosion, destruction of underwater ecosystems, human and property damage in urban areas due to flooding of urban river. The damage has been increasing in Korea recently due to localized heavy rains, typhoons and floods. As a countermeasure, the Busan Metropolitan Government will proceed with the creation of the Eco-Delta City waterfront zone in Busan with the aim of creating a future-oriented waterfront city from 2012 to 2023. Therefore, the current urban river conditions and precipitation data were collected by utilizing SWMM developed by the Environment Protection Agency, and the target basin was selected to simulate flood damage. Measures to reduce flood damage in various cases were proposed using simulated data. It is a method to establish a disaster prevention plan for each case by establishing scenario for measures to reduce flood damage. Considering structural and non-structural measures by performing an analysis of the drainage door with a 30-year frequency of 80 minutes duration, the expansion effect of the drainage pump station is considered to be greater than that of the expansion of the drainage door, and 8 scenarios and corresponding alternatives were planned in combination with the pre-excluding method, which is a non-structural disaster prevention measure. As a result of the evaluation of each alternative, it was determined that 100㎥/s of the pump station expansion and the pre-excluding EL.(-)1.5m were the best alternatives.

• Journal of Korea Water Resources Association
• /
• v.49 no.5
• /
• pp.361-372
• /
• 2016

Reliable long-term dam inflow prediction is necessary for efficient multi-purpose dam operation in changing climate. Since 2000s the teleconnection between global climate indices (e.g., ENSO) and local hydroclimate regimes have been widely recognized throughout the world. To date many hydrologists focus on predicting future hydrologic conditions using lag teleconnection between streamflow and climate indices. This study investigated the utility of teleconneciton for predicting dam inflow with 1-month lead time at Andong dam basin. To this end 40 global climate indices from NOAA were employed to identify potential predictors of dam inflow, areal averaged precipitation, temperature of Andong dam basin. This study compared three different approaches; 1) dam inflow prediction using SWAT model based on teleconneciton-based precipitation and temperature forecast (SWAT-Forecasted), 2) dam inflow prediction using teleconneciton between dam inflow and climate indices (CIR-Forecasted), and 3) dam inflow prediction based on the rank of current observation in the historical dam inflow (Rank-Observed). Our results demonstrated that CIR-Forecasted showed better predictability than the other approaches, except in December. This is because uncertainties attributed to temporal downscaling from monthly to daily for precipitation and temperature forecasts and hydrologic modeling using SWAT can be ignored from dam inflow forecast through CIR-Forecasted approach. This study indicates that 1-month lead dam inflow forecast based on teleconneciton could provide useful information on Andong dam operation.

• Atmosphere
• /
• v.25 no.4
• /
• pp.693-706
• /
• 2015

A shift of first fowering date (FFD) of spring blossoms (cherry, peach and pear) over the northest Asia under global warming is investiaged using dynamically downscaled daily temperature data with 12.5 km resolution. For the study, we obatained gridded daily data with Historical (1981~2010), and Representative Concentration Pathway (RCP) (2021~2100) 4.5 and 8.5 scenarios which were produced by WRFv3.4 in conjunction with HadGEM2-AO. A change on FFDs in 21st century is estimated by applying daily outputs of WRFv3.4 to DTS phonological model. Prior to projection on future climate, the performances of both WRFv3.4 and DTS models are evaluated using spatial distribution of climatology and SCR diagram (Normalized standard deviation-Pattern correlation coefficient-Root mean square difference). According to the result, WRFv3.4 and DTS models well simulated a feature of the terrain following characteristics and a general pattern of observation with a marigin of $1.4^{\circ}C$ and 5~6 days. The analysis reveals a projected advance in FFDs of cherry, peach and pear over the northeast Asia by 2100 of 15.4 days (9.4 days). 16.9 days (10.4 days) and 15.2 days (9.5 days), respectively, compared to the Historical simulation due to a increasing early spring (Februrary to April) temperature of about $4.9^{\circ}C$ ($2.9^{\circ}C$) under the RCP 8.5 (RCP 4.5) scenarios. This indicates that the current flowering of the cherry, peach and pear over analysis area in middle or end of April is expected to start blooming in early or middle of April, at the end of this century. The present study shows the dynamically downscaled daily data with high-resolution is helpeful in offering various useful information to end-users as well as in understanding regional climate change.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.5
• /
• pp.383-392
• /
• 2011

The basic research of the estuarine circulation at Gyeong-Gi bay has not been well studied up to now, although coastal development pressures have been continuously increased. To understand the oceanographic phenomena at the Han River estuary, it's essential to understand the propagation characteristic of tidal wave which is the strongest external forcing in this region. In this study, we investigate the tidal wave propagation characteristics along the 3 major channels using observation data and numerical model. It is found that 3 channels are all hyper-synchronous and the most important physical factor controlling the tidal wave propagation is topographical convergence of estuary shape and friction. The result of analytic solution at ideal channel considering the topographical convergence and friction show that the contribution of physical role of convergence and friction varies at 3 different channel. And the ratio of convergence and friction at Yeomha channel is four times larger than Seokmo channel. Because of this effect, the location of maximum amplitude at Yeomha channel is showed up downward than Seokmo channel. The ratio of decreasing amplitude and increasing phase per unit distance between stations is bigger than Seokmo channel. Although 3 major channel show a hyper-synchronous pattern, Yeomha shows more frictionally dominant channel and Seokmo channel is more dominantly affected by convergence effect.

• Journal of Digital Convergence
• /
• v.15 no.3
• /
• pp.221-228
• /
• 2017

With the recent development of IoT technology, medical services using IoT technology are increasing in many medical institutions providing health care services. However, as the number of IoT sensors attached to the user body increases, the healthcare information transmitted to the server becomes complicated, thereby increasing the time required for analyzing the user's healthcare information in the server. In this paper, we propose a deep learning based health care information management method to collect and process healthcare information in a server for a large amount of healthcare information delivered through a user - attached IoT device. The proposed scheme constructs a subnet according to the attribute value by assigning an attribute value to the healthcare information transmitted to the server, and extracts the association information between the subnets as a seed and groups them into a hierarchical structure. The server extracts optimized information that can improve the observation speed and accuracy of user's treatment and prescription by using deep running of grouped healthcare information. As a result of the performance evaluation, the proposed method shows that the processing speed of the medical service operated in the healthcare service model is improved by 14.1% on average and the server overhead is 6.7% lower than the conventional technique. The accuracy of healthcare information extraction was 10.1% higher than the conventional method.

• Journal of radiological science and technology
• /
• v.40 no.1
• /
• pp.135-142
• /
• 2017

Selenium (Se), which is natural materials existing was known as an important component of selenoprotein, one of the important proteins responsible for the redox pump of a living body. Selenium was orally administered to Rat and irradiated with 10 Gy of radiation. Then, the thyroid gland was used as a target organ for 1 day, 7 days and 21 days to investigate the radiation protection effect of selenium (Se) through changes of blood components, thyroid hormones (T3, T4), antioxidant enzyme (GPx) activity and thyroid tissue changes. As a result, there was a significant protective effect of hematopoietic immune system(hemoglobin concentration, neutrophil, platelet)(p<0.05). The activity of Glutathione Peroxidase (GPx), the antioxidant enzyme, and the activity of the target organ, thyroid hormone (T3, T4), also showed significant activity changes (p<0.05). In the observation of tissue changes, it was confirmed that there was a protective effect of thyroid cell damage which caused the cell necrosis by radiation treatment. Therefore, it is considered that selenium(Se) can be utilized as a radiation defense agent by inducing immunogenic activity effect of a living body.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.389-394
• /
• 2015

There is a progressive development in the medical imaging technology, especially of descriptive capability for anatomical structure of human body thanks to advancement of information technology and medical devices. But however maintenance of correct posture is essential for the medical imaging checkup on the shoulder joint requiring rotation of the upper limb due to the complexity of human body. In the cases of MRI examination, long duration and fixed posture are critical, as failure to comply with them leads to minimal possibility of reproducibility only with the efforts of the examiner and will of the patient. Thus, this study aimed to develop an auxiliary device that enables rotation of the upper limb as well as fixing it at quantitative angles for medical imaging examination capable of providing diagnostic values. An auxiliary device has been developed based on the results of precedent studies, by designing a 3D model with the CATIA software, an engineering application, and producing it with the 3D printer. The printer is Objet350 Connex from Stratasys, and acrylonitrile- butadiene-styrene(ABS) is used as the material of the device. Dimensions are $120{\times}150{\times}190mm$, with the inner diameter of the handle being 125.9 mm. The auxiliary device has 4 components including the body (outside), handle (inside), fixture terminal and the connection part. The body and handle have the gap of 2.1 mm for smooth rotation, while the 360 degree of scales have been etched on the handle so that the angle required for observation may be recorded per patient for traceability and dual examination.